Hotchkis 80101-1 User Manual

Anti-roll bar set

22101 – Chrysler Magnum, Charger, 300C, SRT-8

22107 – Dodge Challenger

Thank you for your purchase from our new line of Chrysler parts.

Please call us at (877) 4NO-ROLL if you have any questions

regarding the service or installation of your Hotchkis Performance products.

Visit us online @

Warning: This installation should be performed by a trained professional. The installation requires

lowering of the rear cradle from the vehicle for swaybar removal and reinstallation.

Tools Required for this Installation

- Hydraulic jack, jack stands, torque wrench (4 post lift or alignment rack preferable)

- The following sockets or wrenches: 10mm, 13mm, 15mm, 16mm, 18mm, 21mm

www.hotchkis.net

INSTALLATION OF HOTCHKIS FRONT SWAY BAR

1) Secure the rear wheels with blocks and jack the front up. Support the front of the vehicle with jack
stands on the frame. Observe the stock sway bar orientation and position for reference.

Note: If you are using a 4 post lift or alignment rack, you do not have to jack the front up.

2) Remove the heat shields that cover the subframe mounts using a 10mm wrench or socket.