Hotchkis 70390 User Manual

67-72 C-10 Truck Front Shocks

67-72 GM C-10 TRUCK

70390

FRONT SHOCKS W/ RELOCATORS

Thank you for your purchase.

Please call us at 877 - 4NO - ROLL if you have any questions

regarding the service or installation of your Hotchkis Performance products.

Please read the entire Instruction Manual before starting the installation.

1) Remove the front shocks that are currently on the vehicle.

_____________________________________________________________________________8
633 Sorensen Ave. Santa Fe Springs CA 90670 Hotchkis.net

67-72 C-10 Truck Front Shocks

2) Remove the upper shock stud chassi s mo unt on t he f r am e.

_____________________________________________________________________________8
633 Sorensen Ave. Santa Fe Springs CA 90670 Hotchkis.net

67-72 C-10 Truck Front Shocks

3) On the driver side just to the right of the old stud mount, there is a small frame hole you will use for
reference. (see picture) If you follow a straight line up and over to the top of the frame rail, you will find
another hole. This will be the location of the top hole for the Hotchkis Bracket. Drill out this top hole with a
½” drill bit. (Tip: Accessing this may be easier from the engine bay)

_____________________________________________________________________________8
633 Sorensen Ave. Santa Fe Springs CA 90670 Hotchkis.net