Hotchkis 2290 User Manual

2290 FRONT AND REAR SPORT ST ABILIZER BAR SET

Chevy SSR

Thank you for your purchase from our line of classic suspension parts.

Please call us at (877) 4NO-ROLL if you have any questions regarding your Hotchkis

Performance products. Visit us online @

www.hotchkis.net

Installation of Hotchkis Performance Front Stabilizer Bar

Before starting this installation, please read the entire installation instructions.

This will make the installation flow much smoother.

1) Securely block the rear wheels of the vehicle. Jack the front end up and
safely secure the vehicle with jack stands on the frame. Observe the
stock front stabilizer bar orientation for future reference.

2) Remove the FRONT PASSENGER side wheel.

3) Next, remove the lower end link nut for each side using a 21mm Wrench
and a 7mm Allen Wrench. Save the hardware for reinstallation. Note:
Only the bottom ball joint has a washer.