Page 1
BMW E46 M3
SPORT SWAY BAR SET
# 22826
Thank you for your purchase from our new line of BMW E46 parts.
Please call us at (877) 4NO - ROLL if you have any questions
regarding the service or installation of your Hothckis products.
Visit us online @
Tools required:
- Hydraulic jack, jack stands, or 4-post lift (shown) torque wrench
- The following sockets or wrenches: 12mm, 13mm, 14mm, 16mm, 17mm
- The following Allen wrenches: 6mm
INSTALLATION OF HOTCHKIS FRONT SWAY BAR
1) Drive the front of the vehicle onto floor ramps and securely block the rear wheels of the vehicle. If
ramps are not available, use a jack to lift up the front of the vehicle and use jack stands to support it. Do
not remove the front wheels during installation for safety.
www.hotchkis.net
Loading...