Hotchkis 2255F User Manual

2255 SPORT SWAY BAR SET

62-69 CHRYSLER B-BODY

Thank you for your purchase.

Please call us at 1-877-4NO-ROLL if you have any questions regarding your Hotchkis

Performance products. Visit us online @ www.hotchkis.net

This installation may require drilling new mounting holes in the frame for rear sway bar and

welding for the front.

Please read the instructions carefully to avoid unnecessary drilling.

INSTALLATION OF HOTCHKIS PERFORMANCE

FRONT SWAY BAR

1. This installation should be done on a 4 post alignment rack or drive on ramps. It is

important that the car’s weight is on all 4 wheels in order to ensure that the suspension is in
normal static ride height position.

2. Begin by unbolting the metal radiator brace at the front of the vehicle that connects to the

radiator support to the front of the K-member. Please retain the radiator brace and the
stock hardware for reinstallation.

3. Unbolt and remove the stock end links connecting the old sway bar ends to the lower

control arms.

4. Unbolt and remove the stock bushing retainer brackets. The bushings are trapped in the

brackets and should be removed with the brackets and stock sway bar. The entire assembly
should just drop out when unbolted.