Hotchkis 2251 User Manual

1

Sway Bar Instructions

PN#2251 - 94&up SN95 Non IRS

Thank you for your purchase of this Hotchkis product. Your Sway bars were designed with the
performance and durability you’ve come to expect from Hotchkis Performance. If you have any

questions regarding installation, please do not hesitate to call Hotchkis Performance directly, we

will be more than happy to help. Call 1-800-4NO-ROLL to contact us. Visit us online @

www.hotchkis.net

Rear Sway Bar Installation

1) Look carefully at the stock sway bar installation. V6 Mustangs do not have a stock rear
sway bar or quad shocks and may skip steps 3, 4 and 5.

2) Block the front wheels of the vehicle. Use a jack to lift the vehicle and support the rear
of car on jack stands. Use the jack under the diff to raise the axle in step #11.

3) Use a 14mm socket and ratchet to remove the four sway bar bolts from the lower

trailing arms. Remove the stock sway bar. Use a pair of screwdrivers to pry two of the