Hotchkis 22425 User Manual

Sport Sway Bar Kit (22425)

Scion tC

Thank you for your purchase from our new line of Scion tC parts.

Please call us at (877) 4NO - ROLL if you have any questions

regarding the service or installation of your Hotchkis products. Visit us online @

Tools required for this installation:

- Hydraulic jack, jack stands, torque wrench

- The following sockets or wrenches: 12mm, 14mm, 17mm, 19mm

- The following Allen wrenches: 6mm

- Suggested tools: 6” socket extension, swivel ratchet

www.hotchkis.net

Please Read Before Conti n u ing

Hotchkis Tuning recommends that this sway bar set be installed by a professional, as the
front sway bar can only be removed or installed by detaching the front engine cradle and
lowering it from the vehicle! Please carefully review all steps of the installation instructions
before attempting installation.

INSTALLATION OF HOTCHKIS FRONT SWAY BAR

1) Securely block the rear wheels of the vehicle. Use a jack to lift up the front of the vehicle and use jack
stands to support it. Do not remove the front wheels during installation for safety.

2) Use a 14mm wrench and 6mm Allen wrench to remove the nuts holding the end links to the ends of the
stock sway bar. Remove the end links from t he ends of the sway bar. Retain the hard ware for later
use.