Hotchkis 22423 User Manual

2003-Up Mitsubishi EVO 8

Thank you for your purchase from our line of Mitsubishi Evo 8 parts.

Please call us at (877) 4NO-ROLL if you have any questions regarding the service or installation

of your Hotchkis products. Visit us on the web @ www.Hotchkis.net

Installation of the Rear Sway Bar

1.

2. Unbolt the exhaust hanger by loosening and removing the two retaining bolts.

Securely block the front wheels of the vehicle. Use a jack to lift up the rear of the
vehicle and support with jack stands. You should not remove the rear wheels.

Retain the hardware for later re-installation. Proceed to remove the back portion
of the exhaust system by loosening the system from the rubber exhaust hangars.

You will be re-installing this system later, so take care not to damage your
exhaust when removing it