Hotchkis 22410 User Manual

22410 STREET SWAY BAR SET

2001-UP LEXUS IS300

Thank you for your purchase from our line of Lexus parts.

Please call us at (877) 4NO-ROLL if you have any questions regarding the service or installation

of your Hotchkis products. Visit us on the web @ www.hotchkis.net

• This installation will require:

 Hydraulic jack, jack stands, torque wrench
 The following wrenches or sockets: 10mm, 12mm, 14mm

 Allen wrenches or hex sockets: 5mm

 Phillips head screwdriver

INSTALLATION OF HOTCHKIS TUNING FRONT SWAY BAR

1) Securely block the rear wheels of the vehicle. Use a jack to raise the front end of the vehicle
and support it on jack stands. Observe the stock front sway bar installation for reference.

2) Remove the plastic splashguard from under the front of the vehicle. It is held in place by several
small screws Use a 10mm socket or wrench to remove the screws. Retain the hardware and
splashguard for re-installation.