Hotchkis 2221 User Manual

2221 (97-99) / 2247 (00+) 4WD SPORT SWAY BAR SET

97-UP DODGE DAKOTA

Thank you for your purchase from our line of Dodge Dakota & Durango suspension parts.

Please call us at (877) 4NO-ROLL if you have any questions regarding the service and installation

of your Hotchkis Performance products. Visit us online @

www.hotchkis.net

This installation will require:

 Hydraulic jack, jack stands, torque wrench
 Rotary grinder or disk sander
 The following wrenches or sockets: 15mm, 16mm, 17mm, 21mm, 3 /4"

INSTALLATION OF HOTCHKIS PERFORMANCE FRONT SWAY BAR

1) Securely block the rear wheels of the vehicle. Use a jack to raise the front and support with jack
stands to the frame. You do not have to remove the front wheels for this installation.

2) Use a 15mm socket or wrench to loosen and remove the bolts holding the front skid plate in

place on the vehicle and remove the skid plate. Retain the skid plate and stock hardware for
later re-installation.