2216 (STOCK) / 2224 (3” LOWER) 2WD SPORT SWAY BAR SET
97-UP DODGE DAKOTA
Thank you for your purchase from our line of Dodge Dakota & Durango suspension parts.
Please call us at (877) 4NO-ROLL if you have any questions regarding the service and installation
of your Hotchkis Performance products. Visit us online @ www.hotchkis.net
This installation will require:
Hydraulic jack, jack stands, torque wrench
Rotary grinder or disk sander
The following wrenche s or sockets: 15mm, 16mm, 17mm, 3/4"
INSTALLATION OF HOTCHKIS PERFORMANCE FRONT SWAY BAR
1) Securely block the rear wheels of the vehicle. Use a jack to raise the front and support with jack
stands to the frame. You do not have to remove the front wheels for this installation.
2) Use a 15mm socket or wrench to loosen and remove the nut holding the stock end link to the
sway bar. Retain the stock nut, washer, and bushing for re-installation later.
Loading...