Hotchkis 20104 User Manual

2010 Chevy Camaro

2010 Camaro SS/V6

20104 Underbody Brace

Installation Instructions

Thank you for your purchase of this Hotchkis Performance product. Your Underbody Brace set

was designed with the performance and durability you’ve come to expect from Hotchkis

Performance.

Note: Please read the entire installation instructions before starting. Having the right tools

will ensure a smooth install process.

Hotchkis Performance LLC. 1

2010 Chevy Camaro

UNDER BODY BRACE INSTALLATION

1. Safely raise the vehicle and Unbolt the stock center plate.

NOTE: This is the only stock part that needs to be removed before installation. These
bolts will be used in the installation.

2. Install either side of the under brace by first placing the center mounting

bracket holes where the stock plate was removed from. Use the stock bolts
and the included LARGE washers for this bracket.

NOTE: Do not tighten these bolts yet. Just start the bolts in the holes so that the brace
is supported. This will make it easier to bolt up the other brackets.

Hotchkis Performance LLC. 2