Sport Coil Springs 19104
05 Dodge Charger Hemi, Daytona R/T
Thank you for your purchase from our new line of Charger parts.
Please call us at (877) 4NO-ROLL if you have any questions
regarding the service or installation of your Hotchkis Performance products.
Visit us online @
Warning: This installation should be performed by a trained professional. The installation requires
lowering of the rear cradle from the vehicle for spring removal and reinstallation.
Tools Required for this Installation
- Hydraulic jack, jack stands, torque wrench (4 post lift or alignment rack preferable)
- Coil spring compressor (most major auto parts chains can rent these out)
- The following sockets or wrenches: 10mm, 13mm, 15mm, 16mm, 18mm, 21mm
www.hotchkis.net
INSTALLATION OF HOTCHKIS FRONT COIL SPRINGS
1) Secure the rear wheels with blocks and jack the front up until the front wheels are off the ground.
Support the front of the vehicle with jack stands on the frame.
2) Remove the front wheels using a 21mm socket.
Loading...