Hotchkis 1815A User Manual

1204AA

79 - 04 Ford Mustang

Double Adjustabl e

Trailing Arms

Thank you for your purchase from our new line of Ford parts.

Please call us at (877) 4NO-ROLL if you have any questions

regarding the service or installation of your Hot chkis pro du cts.

Visit us online @

Special Tools Required for this Installation

- 4 post lift or alignment rack preferable

- Air Chisel, Angle Finder (Digital Preferred), Dead blow hammer

www.hotchkis.net

REMOVAL OF STOCK UPPER TRAILING ARMS

1. There are various methods for inst alling your new upper trailing arms. Preferences in met hods are mainly
based on the way you remove the old rubber Can Bushings from the differential. Some may find it easier
to detach the entire differential (rear end) f rom the car in order to remove the Can Bushings. This makes
it easier to get at the Can bushings for removal and replacement. The only problem with this method is
that it requires much more to be disconnected e.g. brake lines, parking brake, axle u-joint, and lower
trailing arms. However, it is possible to remove the Can Bushings without taking the rear end off the car,
but it’s tricky.

In this manual, we will describe how to replace the Can Bushings without removing the rear end from the

car.