Hotchkis 1804A User Manual

1203AA

64-67 GM A-BODY

Trailing Arms

Thank you for your purchase from our new line of GM parts.

Please call us at (877) 4NO-ROLL if you have any questions

regarding the service or installation of your Hotchkis products.

Visit us online @

Warning: This installation should be performed by a trained professional. Note, pictures in this

booklet are from a 77-96 GM B Body. Installation for your 64-67 A-Body is very similar.

Tools Required for this Installation

- 4 post lift or alignment rack preferable

- Air Chisel, Angle Finder (Digital Preferred), Dead blow hammer

- The following sockets or wrenches: 10mm, 13mm, 15mm, 16mm, 18mm, 21mm

www.hotchkis.net

1. Raise the vehicle to access the rear end section.