Hotchkis 1501 User Manual

1501 DOUBLE ADJUSTABLE PANHARD BAR

82-02 CHEVROLET/PONTIAC F-BODY

Thank you for your purchase.

Please call us at [phone] if you have any questions regarding your Hotchkis Performance

products. Visit us online @ www.hotchkis.net

INSTALLATION OF HOTCHKIS PERFORMANCE

ADJUSTABLE PANHARD BAR

1) Jack up the rear of the vehicle and use jack stands to support the sub-frame.

2) Place the jack unde r the different ial to raise o r lower the axle as neces sary. You will need to do

this so that the axle sits at ride height in the vehicle. USE CAUTION! Do not take the vehicle
weight off the jack stands.

3) Remove the bolts at each end of the stock panhard bar and remove the bar . Retain and clean

the stock hardware for later use!

4) Place the stock panhard bar on a flat, level surface, next to the Hotchkis panhard bar. Match the

length between the bushing centers on the stock bar to the Hotchkis bar. If the lengths are
uneven, then loosen the jam nut on the Hotchkis bar and rotate the head of the bar to adjust.
Make sure you keep the exposed threads the same on both sides of the panhard bar.