Host Liberator, Freestyle, Reliant User Manual
HOST®System Instruction Manual
Table of Contents
Getting Started
Removing Electrical Cord from Hook . . . . . . . . . . . . . .3
Removing from Caddy . . . . . . . . . . . . . . . . . . . . . . . .3
How to Clean Carpet
Vacuuming & Pile Lifting . . . . . . . . . . . . . . . . . . . . . . .4
Before Applying HOST Dry Carpet Cleaner . . . . . . . . .4
Filling the Applicator . . . . . . . . . . . . . . . . . . . . . . . . . .4
Replacing Lid on Bucket . . . . . . . . . . . . . . . . . . . . . . .4
Applying with the Applicator . . . . . . . . . . . . . . . . . . . .5
Applying by Hand . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Brushing with Machine . . . . . . . . . . . . . . . . . . . . . . . .5
Removing HOST Dry Carpet Cleaner . . . . . . . . . . . . .6
Emptying the Bagless Hopper . . . . . . . . . . . . . . . . . . .6
Cleaning Very Dirty Car pet . . . . . . . . . . . . . . . . . . . . .6
How to Remove Spots & Spills
Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Brushing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Vacuuming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Removing Spots . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Upkeep & Clean-Up
Cleaning the Filters & Vacuum Cone . . . . . . . . . . . . . .9
Cleaning the Motor Vents & Filter . . . . . . . . . . . . . . . .9
Checking the Hose for Clogs . . . . . . . . . . . . . . . . . . .10
Cleaning & Rotating Brushes . . . . . . . . . . . . . . . . . .10
Cleaning the Vacuum Shoe & Brush Guard . . . . . . . .10
Getting Started
Removing from Tray . . . . . . . . . . . . . . . . . . . . . . . . .11
Plugging Machine into Electrical Outlet . . . . . . . . . . .11
How to Clean Carpet
Vacuuming & Pile Lifting . . . . . . . . . . . . . . . . . . . . . .12
Before Applying HOST Dry Carpet Cleaner . . . . . . . .12
Filling the Applicator . . . . . . . . . . . . . . . . . . . . . . . . .13
Replacing Lid on Bucket . . . . . . . . . . . . . . . . . . . . . .13
Applying with the Applicator . . . . . . . . . . . . . . . . . . .13
Applying by Hand . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Brushing with Machine . . . . . . . . . . . . . . . . . . . . . . .14
Removing HOST Dry Carpet Cleaner . . . . . . . . . . . .14
Cleaning Carpeted Stairs . . . . . . . . . . . . . . . . . . . . .14
Emptying the Bagless Hopper . . . . . . . . . . . . . . . . . .15
Cleaning Very Dirty Car pet . . . . . . . . . . . . . . . . . . . .15
How to Remove Spots & Spills
Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Brushing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Vacuuming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Removing Spots . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Upkeep & Clean-Up
Cleaning the Filters & Vacuum Cone . . . . . . . . . . . . .18
Checking the Hose for Clogs . . . . . . . . . . . . . . . . . . .18
Cleaning & Rotating Brushes . . . . . . . . . . . . . . . . . .19
Cleaning the Vacuum Shoe & Brush Guard . . . . . . . .19
Cleaning the Motor Vents & Filter . . . . . . . . . . . . . . .19
Getting Started
Removing from Tray . . . . . . . . . . . . . . . . . . . . . . . . .20
Plugging Machine into Electrical Outlet . . . . . . . . . . .20
How to Clean Carpet
Vacuuming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Before Applying HOST Dry Carpet Cleaner . . . . . . . .21
Filling the Applicator . . . . . . . . . . . . . . . . . . . . . . . . .21
Replacing Lid on Bucket . . . . . . . . . . . . . . . . . . . . . .21
Applying with the Applicator . . . . . . . . . . . . . . . . . . .22
Applying by Hand . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Brushing with Machine . . . . . . . . . . . . . . . . . . . . . . .22
Removing HOST Dry Carpet Cleaner . . . . . . . . . . . .23
Cleaning Carpeted Stairs . . . . . . . . . . . . . . . . . . . . .23
Cleaning Very Dirty Car pet . . . . . . . . . . . . . . . . . . . .23
How to Remove Spots & Spills
Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Brushing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Vacuuming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Removing Spots . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Upkeep & Clean-Up
Cleaning the Motor Vents . . . . . . . . . . . . . . . . . . . . .26
Cleaning & Rotating Brushes . . . . . . . . . . . . . . . . . .26
3
The HOST® System
How to Get the Best Results
Using the HOST Liberator
®
Be sure to read separate Safety and Maintenance
Instructions before using.
Removing Electrical Cord from Cord Hook
Rotate the cord hook plate 180° to remove
cord from machine.
Removing Liberator from Caddy
1. Plug Liberator power cord into outlet.Do not use
an extension cord.
2. Lock handle in position by pointing red arrowhead
down. Note that there are 2 handle locks, one on
each side of machine.
Unlock locking bolts on front of caddy.
Blue/unlocked
Red/locked
Handle locking knob
Locking
bolts
180°
Power cord
hook plate
Getting Started
1
a
b
Locate the switch control panel
on the back of the Liberator. Turn
on machine brushes by pressing
the blue switch and drive the
Liberator off the caddy.
c
Blue brush
switch
White vacuum
switch
Filter light
2
4
Vacuuming & Pile Lifting
How to Clean Carpet with the Liberator
Lawnmower V acuumingNormal Vacuuming Style
Before Applying HOST Dry Carpet Cleaner
Place bucket on its side for 10 minutes.This will help
to distribute the liquid ingredients evenly throughout
the cleaner.
Replacing Lid on Bucket
Be sure to wipe off the edge of bucket before replacing the lid.
This will prevent leaking.
1
Vacuum the area using the machine
as you would any vacuum.
a
In hallways and open areas, vacuum
lawnmower style.
b
2
Filling the Applicator
Fill the applicator with 12 pounds (5.4 kilos) of HOST.
DO NOT OVERFILL!
3
4
Fill here
Hole cover
Fill port cover
Note: Standard (white) and fir m (zebra) brushes must be broken in before using for the first time.
To break in brushes, run the Liberator on smooth concrete surface for 15 minutes.
5
How to Clean Carpet with the Liberator
Applying with the Applicator
Open hole covers for HOSTapplication.
Choose:
• Light (1 cover open)
• Medium (2 covers open)
• Heavy (3 covers open)
Walk the Applicator over the area of dirty
carpet. DO NOT apply to an area larger than
10 feet x 50 feet (approx. 50 sq. meters).
Keep Applicator 1 foot away from wall.
5
a
b
c
a
b
1 Foot
Applying by Hand
Apply a handful of HOST to each square yard
(or square meter) of dirty car pet.
Do not apply to an area larger than 10 feet by 10 feet
(about 10 sq. meters) to keep HOST from drying out.
Begin brushing as soon as you have finished applying.
6
Brushing with Machine
Make sure the white vacuum switch is OFF.
Use push-pull strokes just like when you vacuum.
2nd Pass1st Pass 3rd Pass
7
It is not necessary to apply HOST
next to the wall or to areas which do
not appear dirty.Apply only to dirty
parts of the car pet.
Path of Applicator
Dirty Area of Carpet
6
Vacuuming
Vacuum the area you have just finished brushing.
Use the normal vacuuming style for best results.
The Liberatorvacuums best if HOSTis a bit damp.
If Carpet is Still Dirty
If carpet is still dir ty, reapply HOST and br ush again.
Normal Vacuuming Style
For Very Dirty Carpet
If carpet is very dir ty, PREP®Traffic Lane Booster may
be necessary.
To use PREP:
Mix 1 part PREP in 4 par ts water
in a trigger spray bottle.
Mist PREP lightly on dir ty car pet.
Apply HOST Dry Car pet Cleaner as before.
Brush with the Liberator.
Vacuum.
Pre-Clean is
ready-to-use PREP.
How to Clean Carpet with the Liberator
8
a
b
c
d
e
Tip
Tip
Emptying the Bagless Hopper
Empty the bagless hopper often to avoid clogging filters.
Pull out the hopper.
Empty into trash container.
Replace the hopper and insure that it is completely
closed to avoid vacuum power loss.
9
a
b
c
7
Preparation
Always vacuum first.
Scatter HOST Dry Carpet Cleaner
on the spot.
How to Remove Spots & Spills with the Liberator
1
Brushing
Concentrate the brushing over the spot.
Brush in a circle over the spot.
Brush an area slightly larger than the area
with the spot.
2
Removing HOST Dry
Carpet Cleaner
After brushing, vacuum up the HOST with the
Liberator.
3
a
b
a
b
c
8
Removing Spots with HOST PREP
Mist diluted PREP on the spot.
Apply more HOST.
Brush again.
How to Remove Spots & Spills with the Liberator
a
b
c
Tip
Tip
Pre-Clean is
ready-to-use PREP.
Removing Spots with the HOST spotZAPPER
®
Spots can also be removed using the HOST spotZAPPER:
1. Apply HOST Dry Carpet Cleaner.
3.The more brushing, the better.
2. Brush in many directions.
4. After brushing, let dry and
then vacuum.
9
Upkeep & Clean-up of the Liberator
Cleaning the Filters & Vacuum Cone
Turn Liberator off. Unlatch filter
housing and swing to the side.
Vacuum the black and burnt orange filters with
a tank vacuum.You can also use the included
filter brush.
Remove the separator assembly
and wipe the inside with a cloth.
Note: If you are cleaning
where IAQ is a concern
(i.e. healthcare facility),
clean filters elsewhere.
Vacuum the 3-piece filters with a tank vacuum and
replace. Refer to Safety & Maintenance Instructions
for cleaning HEPA filters
Replace the separator assembly
and push down firmly for a tight
seal.Then replace the orange filter,
then the black filter. Close the filter
housing and close the latches.
Black
Burnt orange
Filter brush
a b
e
c d
1
Screws
Screws
Vacuum vents
Remove and
clean foam filter
Cleaning the Motor Vents & Filter
Vacuum motor vents with the Liberator
hose after each use.
Remove the Velcro
®
skirt and screws
from side and back cover plates.
2
a
b
Remove foam motor filter and vacuum
or rinse the filter.Allow filter to dry
completely before replacing.
c
Loading...