Hoshizaki American, Inc. HPR72A General Manual

HPR46/72A

Professional Series Preparation Table Refrigerators

HPR46/72A

11/10

Item # 13248

Hoshizaki America, Inc. reserves the right to change
specifications without notice.

Item #

Project:

Qty:

*AutoCad available on KCL

HPR46/72A Dimensions
W x D x H

1 Section - 46” x 32.3” x 44.8”*

2 Section - 72” x 32.3” x 44.8”*

with 4” casters

*

• Stainless steel interior and exterior

• Raised rail is mechanically refrigerated and equipped with a 1” drain

• Low profile fans circulate refrigerated air in the rail to reduce energy consumption

• Rail is equipped with a one piece stainless steel cover

• Rail will accommodate 1/6th, 1/3rd, ½ or full size, 6” deep pans (pans and adapter bars by others)

• Entire cabinet and rail are insulated with 2 3/8" CFC free foamed in place polyurethane

• Doors are constructed of high-grade stainless steel inside and out and are self-closing

• Doors are standard with locks

• Stepped door design protects door gasket

• Snap in magnetic door gaskets

• (1) heavy duty epoxy coated shelf standard per section

• Cabinet door perimeter heaters provide condensation control

• EverCheck controller monitors critical refrigeration functions

• Refrigeration system is equipped with solid state digital controls for base and rail

• Exclusive “night switch” allows overnight product storage in rail with cover closed

• Evaporator coil is enamel coated

• Front breathing with Zero clearance requirements

• Hinged, louvered front panel for easy access to controller

• Removable stainless steel end panel for access to refrigeration system

• Removable, cleanable refrigeration system air filter

• Energy efficient automatic hot gas condensate evaporator

• 4" heavy duty platform casters (two with brakes)

• Two years parts and labor warranty

• Five year compressor warranty

• 8 ft. cord and plug

Dimensions / Capacity

Model # One Section

Interior StorageCapacity (CF) 8.5 ft

Overall Width x Depth 46” x 32.3” 72” x 32.3”

Height (including 4” casters) 44.8” 44.8”

Door Opening Width x Height 22.5” x 24.3” 22.5” x 24.3”

Depth with Door open at 90˚ 56.8” 56.8”

Adjustable Shelves 1 2

Shelf Dimensions (W x D) 22.4” x 24.6” 25.0” x 24.6”

Crated Shipping Weight 373 lbs 585 lbs

Crated Height x Width x Depth 58.1” x 50” x 36.25” 51.8” x 76” x 36.25”

HPR46A

3

Two Section

HPR72A

3

18.8 ft

Electrical/Refrigeration

Voltage - 115/60/1

HACR Breaker - 15.0 / 20.0

lectrical Connection - 5-15P/5-20P

E

(NEMA)

Voltage Range - 104-126

Ambient Temp. Range - 45˚- 86˚F

Control Setpoint Range (Base) - 21˚-53˚F

Control Setpoint Range (Rail) - 13˚-53˚F

*Refrigerant R-404A

Warranty

Valid in United States, Canada, Puerto Rico,
and U.S. Territories. Contact factory for
warranty in other countries.

• Two Year - Parts & Labor on entire

• Five Year - Parts on: Compressor.

machine.

Options

• 1/2” polyurethane cutting board

• 12” rail adapter bars

• 6” legs

• (2) drawers in lieu of (1) door

• Additional epoxy shelves

Electrical & Refrigeration Data

Model # One Section

Amperage

Energy Consumption (kwh/day)

Heat Rejection (BTU/Hr.) @ NSF

Approx. Nominal Compres. BTU/HR(HP)

HPR46A

7.6 12.8

7.3 13.9

1044 1976

1280 (1/4HP) 4391 (5/8HP)

Two Section

HPR72A

© HOSHIZAKI AMERICA, INC.

618 Hwy. 74 S., Peachtree City, GA 30269

TEL [phone]

FAX [phone]

www.hoshizaki.com

46"

HPR46/72A

Professional Series Preparation Table Refrigerators

2"

7

27"

27"

.5

1

32.3"

4.6"

44.8"

36"

5.5"

25.5"

FRONT VIEW - HPR46A

32.3"

24.5"

AIL CAPACITY - (12) 1/6 SIZE PANS 6” DEEP

R
(Pans and Adapter Bars by Others)

56.8"

25.5"

FRONT VIEW - HPR72A

TOP VIEW - HPR46A

Cabinet Construction

The exterior cabinet front, sides, and top are constructed of high quality stainless steel. The exterior back and bottom are made from galvanized steel. The
cabinet interior walls and ceiling are stainless steel. The floor is constructed of heavy gauge stainless steel with coved corner construction. Heavy duty ABS
thermal breaks are used to reduce heat transfer in the door frames. The cabinet door perimeter heater provides condensation control in high humidity
environments and is equipped with a back-up heater should the primary fail. Cabinet walls are insulated with 2 3/8” of environmentally friendly R-134a, CFC free
foamed in place polyurethane. 4" heavy duty platform casters (2 with brakes) are standard and installed at the factory. (1) heavy duty epoxy coated shelf standard
per section.

Rail Construction

The raised refrigerated rail is constructed of stainless steel interior and exterior (except back is galvanized steel). The rail is mechanically cooled with copper
refrigeration lines strategically placed on the exterior of the stainless steel liner to achieve optimum heat transfer. The rail is insulated with 2 3/8” of
environmentally friendly R-134a, CFC free foamed in place polyurethane. Horizontal, low profile fans with stainless steel shrouds are located in the bottom of the
rail. The fans circulate the refrigerated air providing more even air distribution and reduced energy costs. A 1” drain is located above the compressor housing to
facilitate removal of moisture. The rail will accommodate 1/6th, 1/3rd, ½ and full size pans 6” deep. Standard 12” adapter bars will support pans in the rail (pans
and adapter bars by others). Pans are located 1” below the front of the rail to assist in access to food product. A hinged one piece stainless steel cover is
standard.

Door Construction

Doors are constructed of high grade stainless steel inside and out, are insulated with R-134A CFC free foamed in place polyurethane and are standard with locks.
Hoshizaki’s exclusive “stepped” design protects the recessed door gasket from sharp pan edges as product is removed from the cabinet. Low profile handles are
constructed of rugged injected molded ABS and can be replaced if required. The hinges are all metal and include a nylon cam to facilitate the self closing feature.
Hinge plates are constructed of eleven (11) gauge stainless steel and include a welded hinge pin. doors stay open at 105˚ and are self-closing at 75˚. Snap-in
magnetic door gaskets are durable and easily removed for cleaning. Door hinging is reversible at the factory without cost.

Refrigeration System

The high efficiency self contained refrigeration system is designed with a large capacity condenser and evaporator resulting in lower overall energy costs. The
refrigeration system components are fully assembled and mounted on a 16 gauge galvanized steel cassette. All heat exchange takes place outside the food zone
and allows for 100% utilization of the interior storage area. The evaporator coil is enamel coated for extended life. Stainless steel refrigerant tubing is used for
the hot gas condensate evaporator. A thermostatic expansion valve and solenoid valves control the flow refrigerant to the base and rail as required to maintain
optimum product temperatures. A removable, cleanable air filter protects the condenser coil and helps reduce cleaning requirements of the refrigeration system.
115 volt units are equipped with an eight foot cord and plug (20.0 amps or less).

®

The EverCheck
raised rail preparation tables. The solid state controls maintain optimum cabinet and rail temperatures (37 degrees F for the base and 33 degrees F for the rail).
The EverCheck
the operator to possible problems. An LED display shows the cabinet and rail temperatures and is adjustable to Fahrenheit or Celsius. The base defrost cycles
are time initiated temperature terminated and can be set to cycle from one to twelve hour intervals to prevent ice formation and maintain optimum cabinet
temperatures. Hoshizaki’s exclusive “night switch” rail control setting allows for over night product storage in the rail with the cover closed. (Please note: Food
product must be properly covered). The “night switch” control setting allows for off cycle defrost of the rail. This setting minimizes the formation of harmful
frost on the interior of the rail and protects product.

Solid State Digital Control System monitors the operation and performance of the refrigeration system and is standard on all Professional Series

®

control also monitors high and low temperatures, high pressure, high and low voltage and clean filter functions. It provides visual alarms to alert

2

TOP VIEW - HPR72A

3.9"

SIDE VIEW

AIL CAPACITY - (18) 1/6 SIZE PANS 6” DEEP

R
(Pans and Adapter Bars by Others)

32.3"

56.8"

4.5"

2

© HOSHIZAKI AMERICA, INC.

618 Hwy. 74 S., Peachtree City, GA 30269 • TEL [phone] • FAX [phone] • www.hoshizaki.com