Hoshizaki American, Inc. DB-200H Service Manual

Hoshizaki America, Inc.

Hoshizaki

Ice Dispensing Bin

Model
DB-200H

“A Superior Degree

of Reliability”

www.hoshizaki.com

SERVICE MANUAL

Number: 73136
Issued: 5-8-2006

IMPORTANT

Only qualified service technicians should attempt to service or maintain this
dispensing bin. No service or maintenance should be undertaken until the
technician has thoroughly read this Service Manual.

HOSHIZAKI provides this manual primarily to assist qualified service technicians in the
service and maintenance of the dispensing bin.

Should the reader have any questions or concerns which have not been satisfactorily
addressed, please call or write to the HOSHIZAKI Technical Support Department for
assistance.

HOSHIZAKI AMERICA, INC.
618 Highway 74 South
Peachtree City, GA 30269

Attn: HOSHIZAKI Technical Support Department

Phone: [phone] Technical Service
[phone]
Fax: [phone]
[phone]

Web Site: www.hoshizaki.com

Note: To expedite assistance, all correspondence/communication MUST include the

following information:

• Model Number

• Serial Number

• Complete and detailed explanation of the problem

2

Please review this manual. It should be read carefully before the dispensing bin is
serviced or maintenance operations are performed
should service and maintain the dispensing bin
to the technician prior to service or maintenance

. Only qualified service technicians

. This manual should be made available

.

CONTENTS

I. Specification ....................................................................................................................... 4

II. General Information ........................................................................................................... 5

A. Construction .................................................................................................................. 5

III. Technical Information ........................................................................................................ 6

A. Wiring Diagram ............................................................................................................. 6

IV. Service Diagnosis ............................................................................................................. 7

V. Removal and Replacement of Components ..................................................................... 9

A. Gear Motor and Chain ................................................................................................. 9

B. Safety Switch ................................................................................................................ 9

C. Spout Switch ................................................................................................................. 9

D. Solenoid ...................................................................................................................... 10

VI. Cleaning and Maintenance Instructions ......................................................................... 11

A. Cleaning Instructions .................................................................................................. 11

1. Cleaning Procedure ............................................................................................... 11

2. Sanitizing Procedure – Following Cleaning Procedure .......................................... 13

B. Maintenance ................................................................................................................ 13

1. Exterior Panels ...................................................................................................... 13

2. Chain ..................................................................................................................... 13

C. Preparing the Ice Dispensing Bin for Long Storage .................................................... 13

3

I. Specification

A

C SUPPLY VOLTAGE 115/60/1

A

MPERAGE 1.4

A

MINIMUM CIRCUIT AMPACITY 15

A

MAXIMUM FUSE SIZE 15

A

A

PPROXIMATE ELECTRIC CONSUMPTION 110 W

A

PPROXIMATE STORAGE CAPACITY 200 lbs (91 Kg)

A

PPROXIMATE ICE DISPENSING SPEED 13 lbs/min (6 kg/min)

EXTERIOR DIMENSIONS ( W x D x H ) 30" x 30" x 53" (762 x 757 x 1346 mm) With 6" Legs
INTERIOR DIMENSIONS ( W x D x H ) 23.3" x 22.4" x 22.5" (592 x 569.5 x 571 mm)
EXTERIOR FINISH Plastic/SUS Front Cover, P.V.C Galvanized Steel Side Panel

s

Galvanized Steel Rear Panel
INTERIOR FINISH Polyethelene 1 pc. Mold
INSULATION Polyurethane Foam
WEIGHT Net 187 lbs (85 kg), Shipping 220 lbs (100 kg)
CONNECTIONS - ELECTRIC Permanent Connection

- DRAIN Outlet 3/4" FPT

- WATER INLET N/

A

GEAR MOTOR 60 W

A

GITATOR Stainless Steel Round Bar 14.5" Dia.

GEAR MOTOR PROTECTION Thermal Protector (Internal)
SAFTEY PROTECTION Interlock Switch for Front Panel

Saftey Switch for Ice Spou

t

ACCESSORIES 6" Legs, 4 pcs

OPERATING CONDITIONS VOLTAGE RANGE 104 - 132 V

AMBIENT TEMP. 45 - 100° F

We reserve the right to make changes in specifications and design without prior notice.

4