Hoshizaki America RFH2-SSB-HD User Manual

RFH2-3-SSB-HD
3/13
Item # 13256
RFH2-3-SSB-HD
Professional Series Reach-in Dual Temps
Hoshizaki America, Inc. reserves the right to change specifications without notice.
*AutoCad available on KCL
Project:
Qty:
• Stainless steel interior and exterior
• Energy efficient thermostatic expansion valve self contained refrigeration system
• EverCheck digital control system with audio alarms
• Entire cabinet is insulated with 2 3/8" foamed in place polyurethane
• Unique “ducted” air distribution system
• Self closing all stainless steel doors with locks
• Dual door frame heaters with energy saving on/off switch
• All metal torsion spring hinge design with stay open feature
• Exclusive "stepped" door design to protect recessed door gasket
• Flush mount door handles
• Field reversible doors (with optional kit)
• Epoxy coated evaporator coil
• Hinged upper front panel for easy access to controller
• Removable, cleanable refrigeration system air filter
• Energy efficient automatic hot gas condensate evaporator
• (3) Epoxy coated wire shelves per section
• Standard with 4" factory installed casters (2 with brakes)
• Three years parts and labor warranty
• Five year compressor warranty
• 8 ft. cord and plug
© HOSHIZAKI AMERICA, INC.
618 Hwy. 74 S., Peachtree City, GA 30269
TEL 800-438-6087
FAX 800-345-1325
www.hoshizaki.com
RFH-SSB-HD Dimensions W x D x H
2 Section - 55” x 33.6” x 82.5”*
3 Section - 82.5” x 33.6” x 82.5”*
*with 4" casters
Electrical/Refrigeration
Voltage - 115/60/1
HACR Breaker - 20.0/30.0
Electrical Connection - Hard-Wired
(NEMA)
Voltage Range 104-126
Ambient Temp. Range 45˚-100˚F
Control Setpoint Range 36˚-50˚F (R)
-10˚ - 25˚F (F)
*Refrigerant R-404A
Warranty
Valid in United States, Canada, Puerto Rico, and U.S. Territories. Contact factory for warranty in other countries.
Three Year - Parts & Labor on entire machine.
Five Year - Parts on: Compressor.
Options
• 6” legs with stainless steel bullet feet
• Door reversal kit
• Additional epoxy shelves
• Stainless steel shelves
• Patented foot pedal door opener
• Combination universal tray/pan slides
• Door padlock hasp
• NAFEM Data Protocol connection
(Software by other vendors)
Dimensions / Capacity
Electrical & Refrigeration Data
Model # Two Section
RFH2-SSB-HD
Three Section RFH3-SSB-HD
Interior StorageCapacity (CF) 22.3 ft
3
ea. sec. (R & F) 48.0 ft
3
(R) / 22.3 ft
3
(F)
Overall Width x Depth 55” x 33.6” 82.5” x 33.6”
Height (including 4” casters) 82.5” 82.5”
Door Opening Width x Height 21.75” x 59.25” 21.75” x 59.25”
Depth with Door open at 90° 58.5” 58.5”
Adjustable Shelves 6 (3 ea.) 6 (R) / 3 (F)
Center Shelves - 3 (R)
Shelf Dimensions (W x D) 21.25” x 26” 21.25” x 26”
Crated Shipping Weight 750 lbs 950 lbs
Crated Height x Width x Depth 85” x 59” x 38” 85” x 87” x 38”
Model # Two Section
RFH2-SSB-HD
Three Section RFH3-SSB-HD
Amperage
17 206
Energy Consumption (kwh/day) @ NSF
13.5 16.6
Heat Rejection (BTU/Hr.)
2580 3035
BTU/Hr.
1490 (1/5HP) R / 2671 (2/3HP) F 1490 (1/5HP) R / 2671 (2/3HP) F
RFH2-3-SSB-HD
Professional Series Reach-in Dual Temps
© HOSHIZAKI AMERICA, INC.
618 Hwy. 74 S., Peachtree City, GA 30269 • TEL 800-438-6087 • FAX 800-345-1325 • www.hoshizaki.com
SIDE VIEW (ALL UNITS)
DOOR SWING (ALL UNITS)
PLAN VIEW
33.6”
65.0”
58.5”
82.5”
55.0”
33.6”
82.5”
78.5”
4”
RFH2-SSB-HD
26.75”
Cabinet Construction
The exterior cabinet front, sides, shrouds and hinged front panel are constructed of high quality stainless steel. The exterior top, back and bottom are made from galvanized steel. The cabinet interior walls and ceiling are stainless steel. The floor is stainless steel with coved corner construction. The “ducted” air flow system is also constructed of heavy gauge stainless steel. Heavy duty ABS thermal breaks are used to reduce heat transfer. Three (3) heavy duty epoxy coated shelves per section are standard (and include center shelves on two and three section models). Mounted on stainless steel pilasters the shelves are adjustable in 1” increments. The cabinet door perimeter heater provides condensation control in high humidity environments and is equipped with a back-up heater should the primary fail. A manual power switch allows for energy savings in low humidity conditions. Cabinet walls and doors are insulated with 2 3/8” of environmentally friendly R-134A, CFC free foamed in place polyurethane. The interior light is automatically activated when doors are opened. 4” factory installed casters (2 with brakes) are standard.
Door Construction
Doors are constructed of high grade stainless steel inside and out and are standard with locks. Hoshizaki’s exclusive “stepped” design protects the recessed door gasket as product is removed from the cabinet. Flush mount door handles maximize aisle space by eliminating protruding parts. The door hinges are all metal and include an adjustable torsion spring closure that will not wear out like traditional cam-lift hinges. Hinge plates are constructed of eight (8) gauge stainless steel and include a welded hinge pin. Doors stay open at 105˚and are self-closing at 75˚. Snap-in magnetic door gaskets are durable and easily removed for cleaning. Door hinging is field reversible (with an optional door reversal hinge kit).
Refrigeration System
The high efficiency self contained refrigeration system is designed with a large capacity condenser and evaporator resulting in lower overall energy costs. The refrigeration system components are mounted on a fully insulated roto-cast (ABS) housing that is removable from the main unit. All heat exchange takes place above and outside the food zone and allows for 100% utilization of the interior storage area. The ducted air distribution system achieves a uniform cabinet temperature eliminating “hot spots”, even when fully loaded with product. The evaporator coil is epoxy coated for extended life. Stainless steel refrigerant tubing is used as the hot gas condensate evaporator. A thermostatic expansion valve controls the flow of R-404A refrigerant. A removable, cleanable air filter protects the condenser coil and helps reduce cleaning requirements of the refrigeration system. 115 volt units are equipped with an eight foot cord and plug (20.0 amps or less).
The EverCheck
®
Digital Control System monitors the operation and performance of the refrigeration system and is standard on all Professional Series units. The
EverCheck
®
includes solid state controls to maintain optimum cabinet temperature, and monitor high and low temperatures, high pressure, high and low voltage, clean filter, door open and evaporator temperature functions. It also provides audio and visual alarms to alert the operator to possible problems. An LED display shows the cabinet temperature and is adjustable to Fahrenheit or Celsius. The Professional Series freezer defrost is time initiated, temperature terminated. Defrost frequency is adjustable between one (1) and twelve (12) defrosts per 24 hours [Factory default is six (6)]. The EverCheck®control system is NAFEM Data Protocol ready and requires optional hardware for implementation (monitoring software by others).
RFH3-SSB-HD
82.5”
PLAN VIEW
33.6”
82.5”
Loading...