Hoshizaki America PTR1SSE-FGFG User Manual

PTR1SSE-_G_G(HS)

3/13

Item # 13271

PTR1SSE-_G_G(HS)

Professional Series Pass Thru Refrigerators

Hoshizaki America, Inc. reserves the right to change
specifications without notice.

*AutoCad available on KCL

Item #

Project:

Qty:

• Stainless steel interior and exterior

• Energy efficient thermostatic expansion valve self contained refrigeration system

• Innovative Variable Speed Compressor with “adaptive control” technology

• EverCheck®digital control system with audio alarms

• Entire cabinet is insulated with 2 3/8" foamed in place polyurethane

• Unique “ducted” air distribution system

• Glass doors are energy efficient Triple Pane, Argon filled with Low-E non reflective coating and locks

• Dual door frame heaters with energy saving on/off switch

• All metal torsion spring hinge design with stay open feature

• Exclusive "stepped" door design to protect recessed door gasket

• Rugged, die cast aluminum door handles

• Field reversible doors (with optional kit)

• Epoxy coated evaporator coil

• Hinged upper front panel for easy access to controller

• Removable, cleanable refrigeration system air filter

• Energy efficient automatic hot gas condensate evaporator

• (3) Epoxy coated wire shelves per section

• Standard with 4" factory installed casters (two with brakes)

• Three years parts and labor warranty

• Five year compressor warranty

• 8 ft. cord and plug

© HOSHIZAKI AMERICA, INC.

618 Hwy. 74 S., Peachtree City, GA 30269

TEL [phone]

FAX [phone]

www.hoshizaki.com

PTR-SSE-_G_G Dimensions
W x D x H

1 Section - 27.5” x 35.9” x 82.5”*

*with 4" casters

Electrical/Refrigeration

Voltage 115/60/1

HACR Breaker 15.0

Electrical Connection 5-15P

(NEMA)

Voltage Range 104 - 126

Ambient Temp. Range 45˚-100˚F

Control Setpoint Range 36˚- 50˚F

*Refrigerant R-134A

Warranty

Valid in United States, Canada, Puerto Rico,
and U.S. Territories. Contact factory for
warranty in other countries.

• Three Year - Parts & Labor on entire
machine.

• Five Year - Parts on: Compressor.

Options

• 6” legs with stainless steel bullet feet

• Door reversal kit

• Additional epoxy shelves

• Stainless steel shelves

• Door padlock hasp

• NAFEM Data Protocol connection

(Software by other vendors)

Model # One Section

PTR1SSE-FGFG

One Section

PTR1SSE-HGHG(HS)

Interior StorageCapacity (CF) 23.8 ft

3

23.8 ft

3

Overall Width x Depth 27.5” x 35.9” 27.5” x 35.9”

Height (including 4” casters) 82.5” 82.5”

Door Opening Width x Height 21.75” x 59.25” 21.75” x 26.75”

Depth with Door open at 90° 85.9” 85.9”

Adjustable Shelves 3 3

Shelf Dimensions (W x D) 21.2” x 30.75” 21.2” x 30.75”

Crated Shipping Weight 475 lbs 475 lbs

Crated Height x Width x Depth 85” x 32” x 39” 85” x 32” x 39”

Dimensions / Capacity

Model # One Section

PTR1SSE-FGFG

One Section

PTR1SSE-HGHG(HS)

Amperage 4.3 4.3

Energy Consumption (kwh/day) 4.4 4.5

Heat Rejection (BTU/Hr.) 1025 1025

Approx. Nominal Compres. BTU/HR(HP)

1481 (.40HP) 1481 (.40HP)

Electrical & Refrigeration Data

PTR1SSE-_G_G(HS)

Professional Series Pass Thru Refrigerators

© HOSHIZAKI AMERICA, INC.

618 Hwy. 74 S., Peachtree City, GA 30269 • TEL [phone] • FAX [phone] • www.hoshizaki.com

SIDE VIEW (ALL UNITS)

27.5”

35.9”

PLAN VIEW

Cabinet Construction

The exterior cabinet front, sides, shrouds and hinged front panel are constructed of high quality stainless steel. The exterior top, back and bottom are made from
galvanized steel. The cabinet interior walls and ceiling are stainless steel. The floor is stainless steel with coved corner construction. The “ducted” air flow system
is also constructed of heavy gauge stainless steel. Heavy duty ABS thermal breaks are used to reduce heat transfer. Three (3) heavy duty epoxy coated shelves per
section are standard (and include center shelves on two and three section models). Mounted on stainless steel pilasters the shelves are adjustable in 1”
increments. The cabinet door perimeter heater provides condensation control in high humidity environments and is equipped with a back-up heater should the
primary fail. A manual power switch allows for energy savings in low humidity conditions. Cabinet walls and doors are insulated with 2 3/8” of environmentally
friendly R-134A, CFC free foamed in place polyurethane. The interior light is automatically activated when doors are opened. 4” factory installed casters (2 with
brakes) are standard.

Door Construction

Glass door frames are constructed of high grade stainless steel inside and out and are standard with locks. Door glass is energy efficient triple pane, argon filled
with Low-E non reflective coating. The door hinges are all metal and include an adjustable torsion spring closure that will not wear out like traditional cam-lift
hinges. Hinge plates are constructed of eight (8) gauge stainless steel and include a welded hinge pin. Doors stay open at 105˚and are self-closing at 75˚. Snap-in
magnetic door gaskets are durable and easily removed for cleaning. Door hinging is field reversible (with an optional door reversal hinge kit).

Refrigeration System

The high efficiency self contained refrigeration system is designed using a state of the art variable speed compressor with “Adaptive Control” technology as well
as electronically controlled fan motors resulting in even greater energy savings. The primary objective of the variable speed refrigeration system is for the
compressor to run at the slowest motor RPM level possible to meet the cooling requirements of the refrigerator. Traditional compressor motors have only one
speed; they are either on or off.

The refrigeration system components are mounted on a fully insulated roto-cast (ABS) housing that is removable from the main unit. All heat exchange takes
place above and outside the food zone and allows for 100% utilization of the interior storage area. The ducted air distribution system achieves a uniform cabinet
temperature eliminating “hot spots”, even when fully loaded with product. The evaporator coil is epoxy coated for extended life. Stainless steel refrigerant tubing
is used as the hot gas condensate evaporator. A thermostatic expansion valve controls the flow of R-134A refrigerant. A removable, cleanable air filter protects
the condenser coil and helps reduce cleaning requirements of the refrigeration system. 115 volt units are equipped with an eight foot cord and plug (20.0 amps
or less).

The EverCheck

®

Digital Control System monitors the operation and performance of the refrigeration system and is standard on all Professional Series units. The

EverCheck

®

includes solid state controls to maintain optimum cabinet temperature, and monitor high and low temperatures, high pressure, high and low voltage,
clean filter, door open and evaporator temperature functions. It also provides audio and visual alarms to alert the operator to possible problems. An LED display
shows the cabinet temperature and is adjustable to Fahrenheit or Celsius. The EverCheck

®

control system is NAFEM Data Protocol ready and requires optional

hardware for implementation (monitoring software by other vendors).

PTR1SSB-HGHG
(Operators Side)

PTR1SSB-FGFG

(Operators Side)

PTR1SSB-HGHS
(Operators Side)

DOOR SWING

85.7"

24.9"

6.7"

35.9"

24.9"

Stays open at 105°

Stays open at 90°

82.5”

84.5” 82.5”

35.9"

82.5"

78.5"

4"

26.75"

65.0"