Hoshizaki America, Inc.
Modular Cresent Cuber
Models
KM-901MAH50
“A Superior Degree
of Reliability”
www.hoshizaki.com
KM-901MRH50
PARTS LIST
Number: 71315
Issued: 3-3-2011
Revised: 12-22-2015
CONTENTS
Auxiliary Codes ...................................................................................................................... 3
Note About Ordering Parts .................................................................................................... 3
A. Main Assembly & Refrigeration Circuit .............................................................................. 4
KM-901MAH50 .................................................................................................................. 4
KM-901MRH50 .................................................................................................................. 6
B. Water Circuit ...................................................................................................................... 8
C. Control Box Assembly ..................................................................................................... 10
D. Accessories & Labels ...................................................................................................... 12
2
Auxiliary Codes
KM-901MAH50
V-0 June 2010
A-0 January 2011
A-1 November 2011
B-0 February 2012
C-0 January 2013
D-0 January 2014
E-0 January 2015
KM-901MRH50
V-0 July 2010
A-0 May 2011
A-1 November 2011
B-0 July 2012
C-0 January 2013
E-0 February 2015
Auxiliary Code Breakdown
The auxiliary code is the rst two characters in the serial number. The rst character
indicates the year. Years progress or regress in alphabetical order. The series runs from
"A" through "V" and the letters "I" and "O" are skipped. The second character indicates
signicant part changes within a year. Base is "0" and this number advances for each
change. In cases where there is a letter in parentheses, this designates the month. This
is the last character in the serial number. The series runs from "(A)" through "(M)" and the
letter "(I)" is skipped. This designation is only included when identifying a parts change
within an auxiliary code.
Note About Ordering Parts
Most assemblies cannot be ordered as complete units; parts in the assemblies generally
must be ordered separately.
3