Hoshizaki America KM-515MAH-E Parts List
Hoshizaki
Hoshizaki America, Inc.
Modular Crescent Cuber
Model
KM-515MAH-E
“A Superior Degree
of Reliability”
www.hoshizaki.com
PARTS LIST
Number: 71289
Issued: 9-22-2008
Revised: 4-16-2015
CONTENTS
Auxiliary Codes ...................................................................................................................... 3
Note About Ordering Parts .................................................................................................... 3
A. Main Assembly & Refrigeration Circuit ............................................................................. 4
B. Water Circuit ...................................................................................................................... 6
C. Control Box Assembly ....................................................................................................... 8
D. Accessories & Labels ...................................................................................................... 10
2
Auxiliary Codes
KM-515MAH-E
T-0 April 2008
U-1 January 2009
U-2 February 2009
U-3 August 2009
V-0 January 2010
V-2 April 2010
A-0 January 2011
B-0 January 2012
C-0 January 2013
C-1 May 2013
D-0 March 2014
E-0 January 2015
Auxiliary Code Breakdown
The auxiliary code is the rst two characters in the serial number. The rst character
indicates the year. Years progress or regress in alphabetical order. The series runs from
"A" through "V" and the letters "I" and "O" are skipped. The second character indicates
signicant part changes within a year. Base is "0" and this number advances for each
change. In cases where there is a letter in parentheses, this designates the month. This is
the last character in the serial number. The series runs from "(A)" through "(M)" and the
letter "(I)" is skipped. This designation is only included when identifying a parts change
within an auxiliary code.
Note About Ordering Parts
Most assemblies cannot be ordered as complete units; parts in the assemblies generally
must be ordered separately.
IMPORTANT
IEC standards require that the clamping means of earthing terminals
be adequately secured against accidental loosening and that accessible
metal parts of the icemaker which may become live in the event of an
insulation fault be permanently and reliably connected to an earthing
terminal within the icemaker or to the earthing contact of the icemaker
inlet. This is accomplished in this icemaker through the use of stainless
steel lock washers.
3
Loading...