Hoshizaki America HUR40A-D User Manual

HUR40/68/96A-D

3/13

Item # 13187

Hoshizaki America, Inc. reserves the right to change
specifications without notice.

*AutoCad available on KCL

Item #

Project:

Qty:

• Stainless steel interior and exterior top, front and sides

• EverCheck solid state digital control system with visual alarms

• Entire cabinet is insulated with 2 3/8" CFC free foamed in place polyurethane

• Each drawer accommodates (2) 12” x 20” x 6” deep pans (pans by others)

• Drawer fronts are stainless steel interior and exterior

• Drawer slides are 14 gauge stainless steel with delrin nylon rollers

• Drawers have a 250 lb dynamic load rating

• Cabinet drawer perimeter heaters provide condensation control in high humidity environments

• Epoxy coated evaporator coil

• Front breathing with Zero clearance requirements

• Cartridge-style refrigeration system is easily removed from main unit

• Defrost is time initiated temperature terminated

• Hinged, louvered front panel for easy access to controller

• Removable stainless steel end panel for access to refrigeration system

• Removable, cleanable refrigeration system Air Filter

• Energy efficient automatic hot gas condensate evaporator

• (1) Epoxy coated wire shelf per section

• Stainless steel shelf supports adjustable on 1” centers

• 4" heavy duty platform casters (two with brakes)

• Three years parts and labor warranty

• Five year compressor warranty

• 8 ft. cord and plug

HUR-A-D Dimensions
W x D x H

1 Section - 40.25” x 32.3” x 33.9”*

2 Section - 68” x 32.3” x 33.9”*

3 Section - 95.8” x 32.3” x 33.9”*

*with 4” casters

Electrical/Refrigeration

Voltage - 115/60/1

HACR Breaker - 15.0

Electrical Connection - 5-15P

(NEMA)

Voltage Range - 104-126

Ambient Temp. Range - 45˚-100˚F

Control Setpoint Range - + 21˚to +53˚F

*Refrigerant R-134a

Warranty

Valid in United States, Canada, Puerto Rico,
and U.S. Territories. Contact factory for
warranty in other countries.

• Three Year - Parts & Labor on entire
machine.

• Five Year - Parts on: Compressor.

Options

• 6” Legs

• 6” Casters

• Tray pan rack slides (18” x 26” pans)

• Bullnose top (front & rear)

• Stainless steel back

• (1) One door in lieu of 2 drawers

Dimensions / Capacity

Electrical & Refrigeration Data

Model # One Section

HUR40A-D

Two Section

HUR68A-D

Three Section

HUR96A-D

Interior StorageCapacity (CF) 8.5 ft

3

18.8 ft

3

29.1 ft

3

Overall Width x Depth 40.25” x 32.3” 68” x 32.3” 95.8” x 32.3”

Height (including 4” casters) 33.9” 33.9” 33.9”

Drawer Fully Open (in) 58.1” 58.1” 58.1”

Drawer Opening Width x Height 22.5” x 9.9” 22.5” x 9.9” 22.5” x 9.9”

Pan Capacity (12” x 20” x 6” DP Pans) 4 8 12

Crated Shipping Weight 375 lbs 546 lbs 725 lbs

Crated Height x Width x Depth 39.5” x 44.25” x 36.25” 39.5” x 72” x 36.25” 39.5” x 99.75” x 36.25”

Model # One Section

HUR40A-D

Two Section

HUR68A-D

Three Section

HUR96A-D

Amperage

5.0 5.0 6.0

Energy Consumption (kwh/day)

3.2 4.9 6.0

Heat Rejection (BTU/Hr.)

449 695 852

Approx. Nominal Compres. BTU/HR(HP)

1442 (1/5HP) 1442 (1/5HP) 2010 (1/4HP)

HUR40/68/96A-D

Professional Series Undercounter Refrigerators

© HOSHIZAKI AMERICA, INC.

618 Hwy. 74 S., Peachtree City, GA 30269

TEL [phone]

FAX [phone]

www.hoshizaki.com

40.25"

(1022.4 mm)

68"

(1727.6 mm)

32.3"

(821 mm)

30"

(760.8 mm)

32.3"

(821 mm)

2.1"

(52.4 mm)

3.2"

(82 mm)

95.8"

(2433.3 mm)

HUR40A›D HUR68A›D HUR96A›D

HUR40/68/96A-D

Professional Series Undercounter Refrigerators

© HOSHIZAKI AMERICA, INC.

618 Hwy. 74 S., Peachtree City, GA 30269 • TEL [phone] • FAX [phone] • www.hoshizaki.com

Cabinet Construction

The exterior cabinet front, sides, and top are constructed of high quality stainless steel. The exterior back and bottom are made from galvanized steel. The cabinet
interior walls and ceiling are stainless steel. The floor is constructed of heavy gauge stainless steel with coved corner construction. Heavy duty ABS thermal
breaks are used to reduce heat transfer in the door frames. The cabinet door perimeter heater provides condensation control in high humidity environments and
is equipped with a back-up heater should the primary fail. Cabinet walls are insulated with 2 3/8” of environmentally friendly R-134A, CFC free foamed in place
polyurethane. 4" heavy duty platform casters (2 or 3 with brakes) are standard and installed at the factory.

Drawer Construction

Drawer fronts are constructed of high grade stainless steel inside and out and are insulated with R-134a CFC free foamed in place polyurethane. Each drawer
accommodates (2) 12” x 20” x 6” deep pans (pans by others). Drawer module frames are formed of 14 gauge stainless steel all welded construction and securely
fastened in the cabinet. The drawer slides are 14 gauge stainless steel with delrin rollers to prevent metal to metal contact between the drawer slides and reduce
wear. The drawer slides have a dynamic load capacity of 250 lbs and have been life tested (fully loaded) three hundred thousand openings and closings without
showing significant wear. Low profile handles are constructed of rugged injection molded ABS and can be replaced if required. Snap-in magnetic drawer gaskets
are durable and easily removed for cleaning.

Refrigeration System

The high efficiency self contained refrigeration system is designed with a large capacity condenser and evaporator resulting in lower overall energy costs. The
refrigeration system components are fully assembled and mounted on a 16 gauge galvanized steel cassette that is removable from the main unit. All heat exchange
takes place outside the food zone and allows for 100% utilization of the interior storage area. The evaporator coil is epoxy coated for extended life. Stainless steel
refrigerant tubing is used as the hot gas condensate evaporator. A capillary tube system controls the flow of R-134a refrigerant. A removable, cleanable air filter
protects the condenser coil and helps reduce cleaning requirements of the refrigeration system. 115 volt units are equipped with an eight foot cord and plug
(20.0 amps or less).

The EverCheck

®

Solid State Digital Control System monitors the operation and performance of the refrigeration system and is standard on all Professional Series
undercounter and worktop units. The solid state controls maintain optimum cabinet temperature, and monitor high and low temperatures, high pressure, high and
low voltage and clean filter functions. It also provides visual alarms to alert the operator to possible problems. An LED display shows the cabinet temperature and
is adjustable to Fahrenheit or Celsius. Defrost cycles are time initiated, temperature terminated and can be set to cycle from one to twelve hour intervals to
prevent ice formation and maintain optimum cabinet temperatures.

PLAN VIEW

SIDE VIEW (ALL UNITS)

HUR40A-D

25.8"

(654.2 mm)

13.1"

(333 mm)

13.1"

(333 mm)

.4"

(9.5 mm)

.7"

(19 mm)

40.3"

(1022.6 mm)

22.5"

(570.2 mm)

33.9"

(860.8 mm)

30"

(762.4 mm)

3.9"

(98.4 mm)

24.3"

(616.2 mm)

25.8"

(654.2 mm)

25.8"

(654.2 mm)

13.1"

(333 mm)

13.1"

(333 mm)

.4"

(9.5 mm)

.7"

(19 mm)

HUR68A-D

HUR96A-D

13.1"

(333 mm)

13.1"

(333 mm)

.4"

(9.5 mm)

.7"

(19 mm)

25.8"

(654.2 mm)

25.8"

(654.2 mm)

25.8"

(654.2 mm)

58.1"

(1476.7 mm)

28.2"

(715.9 mm)

27.0"

(686.7 mm)

12.0"

(304.8 mm)

25.1"

(637 mm)

CABINET

FRONT

58.1"

(1476.7 mm)

28.2"

(715.9 mm)

27.0"

(686.7 mm)

12.0"

(304.8 mm)

25.1"

(637 mm)

CABINET

FRONT

20.2"

(513.5 mm)

20.2"

(513.5 mm)

HUR96A-D (TOP VIEW)HUR68A-D (TOP VIEW)HUR40A-D (TOP VIEW)

58.1"

(1476.7 mm)

28.2"

(715.9 mm)

27.0"

(686.7 mm)

12.0"

(304.8 mm)

25.1"

(637 mm)

CABINET

FRONT

20.2"

(513.5 mm)