Hoshizaki America F-330BAH Installation Manual
Hoshizaki America, Inc.
Hoshizaki
Self-Contained Flaker
Model
F-330BAH(-C)
“A Superior Degree
of Reliability”
www.hoshizaki.com
INSTRUCTION MANUAL
®
Issued: 5-4-2007
Revised: 9-5-2007
IMPORTANT
Only qualied service technicians should attempt to install, service, or maintain
this icemaker. No installation, service, or maintenance should be undertaken
until the technician has thoroughly read this Instruction Manual. Likewise, the
owner/manager should not proceed to operate the icemaker until the installer
has instructed them on its proper operation. Failure to install, operate, and
maintain the equipment in accordance with this manual may adversely affect
safety, performance, and warranty coverage.
HOSHIZAKI provides this manual primarily to assist qualied service technicians in the
installation, maintenance, and service of the icemaker.
Should the reader have any questions or concerns which have not been satisfactorily
addressed, please call, write, or send an e-mail message to the HOSHIZAKI Technical
Support Department for assistance.
HOSHIZAKI AMERICA, INC.
618 Highway 74 South
Peachtree City, GA 3069
Attn: HOSHIZAKI Technical Support Department
Phone: 1-800-33-1940 Technical Service
(770) 487-331
Fax: 1-800-843-1056
(770) 487-3360
E-mail: techsupport@hoshizaki.com
Web Site: www.hoshizaki.com
NOTE: To expedite assistance, all correspondence/communication MUST include the
following information:
• Model Number
• Serial Number
• Complete and detailed explanation of the problem
• Please review this manual. It should be read carefully before the icemaker is installed
and operated. Only qualied service technicians should install, service, and maintain the
icemaker. This manual should be made available to the technician prior to installation,
maintenance, or service.
• Keep this manual with the icemaker for later reference.
CONTENTS
I. Specications ..................................................................................................................... 4
A. Nameplate Rating ......................................................................................................... 4
B. Dimensions/Connections .............................................................................................. 5
II. Installation and Operating Instructions .............................................................................. 6
A. Checks Before Installation ............................................................................................ 6
B. How to Remove Panels ............................................................................................... 6
C. Location ........................................................................................................................ 7
D. Setup ............................................................................................................................ 7
E. Electrical Connection .................................................................................................... 7
F. Water Supply and Drain Connections ........................................................................... 7
G. Final Checklist ............................................................................................................. 9
H. Startup ........................................................................................................................ 10
III. Cleaning and Maintenance ............................................................................................. 11
A. Cleaning and Sanitizing Instructions ........................................................................... 11
1. Cleaning Solution .................................................................................................. 11
. Cleaning Procedure ............................................................................................... 11
3. Sanitizing Solution ................................................................................................. 13
4. Sanitizing Procedure - Initial .................................................................................. 13
5. Sanitizing Procedure - Final .................................................................................. 13
B. Maintenance .............................................................................................................. 15
C. Preparing the Icemaker for Long Storage ................................................................. 16
3
I. Specications
HOSHIZAKI ICE MAKER
MOTOR-COMPRESSOR THERMALLY PROTECTED,
NOT INTENDED FOR OUTDOOR USE!
Hoshizaki America, Inc.
Peachtree City, GA
www.hoshizaki.com
LISTED
ICE MAKER
946Z
A. Nameplate Rating
1. F-330BAH, F-330BAH-C
MODEL NUMBER F-330BAH
SERIAL NUMBER
AC SUPPLY VOLTAGE 115/60/1
AMPERES 6.7 AMPS
DESIGN PRESSURE HI-470PSI LO-230PSI
REFRIGERANT 404A 7.1 OZ.
Note: Only the "MODEL NUMBER" is replaced for F-330BAH-C.
See the nameplate for electrical and refrigeration specications. This nameplate is located
on the rear panel.
We reserve the right to make changes in specications and design without prior notice.
4
B. Dimensions/Connections
1. F-330BAH, F-330BAH-C
Unit = inches (mm)
5
II. Installation and Operating Instructions
A. Checks Before Installation
IMPORTANT
1. Install in accordance with all applicable national, state, and local regulations.
. Remove shipping carton, tape, and packing. If any are left in the icemaker, it
will not work properly.
3. Ensure all components, fasteners, and thumbscrews are securely in place
after installation.
•
Remove the top panel and front panel to prevent damage when installing the
icemaker.
•
Remove the package containing the accessories.
•
Remove the protective plastic lm from the panels. If the icemaker is exposed
to the sun or to heat, remove the lm after the icemaker cools.
•
Check that the refrigerant lines do not rub or touch lines or other surfaces, and
that the fan blade turns freely.
•
Check that the compressor is snug on all mounting pads.
•
See the nameplate on the rear panel, and check that your voltage supplied
corresponds with the voltage specied on the nameplate.
B. How to Remove Panels
See Fig. 1
• Front Panel: Remove the screw. Lift up
and towards you.
• Top Panel: Open the door. Remove the
screws. Lift up at the front slightly, push
rearward, and lift off.
Front Panel
Screw
Screw
Door
Top Panel
Fig. 1
Screw
6
Loading...