Hoshizaki America CRES72 User Manual

CRES72

Low-Prole Refrigerated Equipment Stand

CRES72

6/12/15

Item # 13349

Hoshizaki America, Inc. reserves the right to change

specications without notice.

Item #

Project:

Qty:

*AutoCad available on KCL

CRES72 Dimensions
W x D x H

2 Section - 72.5" x 33.25" x 27"*

*with 4" casters

• Stainless steel exterior front, sides and top

• Anodized aluminum interior sides and back with stainless steel interior oor

• 16 gauge stainless steel top with marine edge front and rear and 1" turn-up at each end

• Top is provided with an exclusive, built in, Hoshizaki ceramic heat shield

• Solid state digital controller with temperature alarms and LED display (Fahrenheit or Celsius)

• Cabinet and drawers are insulated with 2” CFC free foamed in place polyurethane

• Stainless steel exterior drawer with stainless steel interior

• Drawer slides are constructed of 14 gauge stainless steel with acetal rollers

• Drawers have a 250 lb. dynamic load rating

• Drawers will accommodate (2) 12” x 20” x 6” deep pans (pans by others)

• Drawer frames are formed of 14 gauge stainless steel and securely fastened to cabinet

• Drawers are equipped with nger cut-outs for easy removal of pans

• Extruded aluminum ush mount drawer handles

• Magnetic drawer gasket is easily removable for cleaning

• Removable stainless steel end panel for access to refrigeration system

• Enamel coated evaporator coil

• Energy efcient automatic hot gas condensate evaporator

• Standard with (6) 4" casters all with brakes

• Three year parts and labor warranty

• Five year compressor warranty

• 8 ft. cord and plug

Dimensions / Capacity

Model #

Overall Width x Depth
Height To Work Surface (including 4" casters)
Depth with Drawer Fully Open (Including 1.5" Bumper)
Pan Capacity (12" x 20")
Maximum Pan Depth
Worktop Maximum Load Capacity
Crated Shipping Weight
Crated Height x Width x Depth

Two Section

CRES72

72.5" x 33.25"
26"

55.75"
8

6"

1200 lbs

410 lbs

28.75" x 74" x 34.25"

Electrical/Refrigeration

Voltage 115/60/1

HACR Breaker

2 Section - 15.0 Amps

Electrical Connection (NEMA)

2 Section - 5-15P

Voltage Range 104-126

Ambient Temp. Range 45° to 100°F

Control Setpoint Range 28° to 45°F

*Refrigerant R-134a

Warranty

Valid in United States, Canada, Puerto
Rico, and U.S. Territories. Contact factory
for warranty in other countries.

• Three Year - Parts & Labor on entire

machine.

• Five Year - Parts on: Compressor.

Options

• Drawer divider bars

Electrical / Refrigeration Data

Model #

Amperage

Energy Consumption (kwh/day) NSF

Heat Rejection (BTU/Hr.) @NSF

Approx. Nominal Compres. BTU/HR (HP)

Two Section

CRES72

4.3

2.8

398.1

1386 (1/5HP)

© HOSHIZAKI AMERICA, INC.

618 Hwy, 74 S., Peachtree City, GA 30269

TEL [phone]

FAX [phone]

www.hoshizaki.com

CRES72

Low-Prole Refrigerated Equipment Stand

72.5”

CRES72

FRONT VIEW

54.25”

1”

20.25”

26” 27”

4”

32.25”

CRES72

SIDE VIEW

72.5”

33.25”

55.75”

1.5”

CRES72

PLAN VIEW

Cabinet Construction

The exterior cabinet front, sides, and top are constructed of high quality stainless steel. The exterior back and bottom are constructed of coated steel.
The cabinet interior walls and ceiling are anodized aluminum. The oor is constructed of heavy gauge stainless steel with coved corner construction. Heavy duty
ABS thermal breaks are used to reduce heat transfer in the frames. Cabinet walls and drawers are insulated with 2" of environmentally friendly R-134a, CFC free,
foamed in place polyurethane. 4" heavy duty platform casters (all with brakes) are standard and installed at the factory.

Drawer Construction

Drawer fronts are constructed of high grade stainless steel with stainless steel interior and are insulated with R-134a CFC free foamed in place polyurethane.
Each drawer accommodates (2) 12” X 20” X 6” deep pans (pans by others). (Drawers will also accept 1/6
Drawer module frames are formed of 14 gauge stainless steel all welded construction and securely fastened in the cabinet. The drawer slides are constructed of
heavy duty 14 gauge stainless steel with durable acetal rollers with stainless steel ball bearings to prevent metal to metal contact. The drawer slides have a dynamic
load capacity of 250 lbs. and have been life tested (fully loaded) three hundred thousand cycles without showing signicant wear. The ush mount handles are
constructed of extruded aluminum. Snap-in magnetic drawer gaskets are durable and easily removed for cleaning.

Refrigeration System

Solid state digital controller with temperature alarms maintains optimum cabinet temperature between 33°F and 41°F. A LED display shows the cabinet temperature
and is adjustable to Fahrenheit or Celsius. The CRES72 has a front breathing refrigeration system. The high efciency refrigeration system is standard with an
enamel coated evaporator for extended life. Condensate removal is accomplished with an energy efcient hot gas condensate evaporator system. A capillary tube
controls the ow of environmentally friendly R-134a refrigerant through the evaporator. Refrigeration system utilizes a heated defrost to eliminate any ice on the
evaporator coil. 115 volt units are equipped with an eight foot cord and plug (20.0 amps or less).

© HOSHIZAKI AMERICA, INC.

618 Hwy, 74 S., Peachtree City, GA 30269 • TEL [phone] • FAX [phone] • www.hoshizaki.com

th

, 1/3rd, and 1/2 size pans with adapter bars optional).