Hoshizaki WR60AD4 Specifications
WR60A-D4
W x D x H
60” x 30” x 40”*
*with 6” casters
Worktop 60” Refrigerator with Drawers
WR60A-D4
Item # 13444
Item #:
Project:
Qty:
AIA#:
Features
Engineered to maintain NSF-7
temperatures in 100°F ambient.
Stainless steel exterior front, sides,
and top with stainless steel interior
sides, back, and floor
Front breathing air flow design
11/19/18
Dimensions / Capacity
Interior Storage Capacity
Interior Storage Capacity (CF) (AHAM)
Overall Width x Depth (including 1” bumper)
Height (including 6” casters)
Depth with Drawer Fully Open (including 1” bumper)
Crated Weight
Crated Length x Width x Height
Electrical / Refrigeration
Voltage
HACR Breaker
Electrical Connection
Voltage Range
Ambient Temp. Range
Control Setpoint Range
Amperage
Energy Consumption
Heat Rejection (BTU/Hr.) @NSF
Approx. Nominal Compres. BTU/HR (HP)
Refrigerant / Charge Amount (oz)
(CF)
(NEMA)
(kWh/day) @NSF
Two-Section WR60A-D4
3
17.55 ft
3
15.38 ft
60” x 31”
40”
52”
312 lbs.
62.5” x 34” x 40.5”
Two-Section WR60A-D4
115/60/1
15.0 Amps
5-15P
104-126
45° to 100°F
32° to 52°F
3.3
2.6
370
1354 (1/5HP)
R290 (2.8 oz)
• Environmentally friendly R290 hydrocarbon refrigerant
*
• Cabinet and drawers are insulated with 2” CFC free,
foamed in place polyurethane
• Drawer slides are constructed of 16 gauge stainless
steel with acetal rollers
• Drawer frames are formed of 16 gauge stainless steel
and securely fastened in the cabinet
• Top drawers will accommodate (1) 12 x 20 full
size pan and (2) ¼ size pans. Bottom drawer will
accommodate (1) full size pan
• Extruded aluminum flush mount drawer handle
• Magnetic drawer gasket is easily removable for
cleaning
• E-coated evaporator coil
• Standard with 6” casters (two with brakes)
• 10 ft. cord and plug
Options
2.25” Casters
4” Casters
Overshelves
© HOSHIZAKI AMERICA, INC.
Warranty
3 Year - parts and Labor on
Stainless steel back
Drawer divider bars
618 Hwy, 74 S., Peachtree City, GA 30269 | TEL 800-438-6087 | FAX 800-345-1325 | www.hoshizakiamerica.com
*
entire machine.
5 Year - Parts on Compressor
Valid in United States, Canada, Puerto
Rico and U.S. Territories. Contact
factory for warranty in other countries.
Hoshizaki reserves the right to change specifications without notice.
13.1”
16”
9.4”
20.9”
WR60A-D4
Worktop 60” Refrigerator with Drawers
WR60A-D4
11/19/18
Item # 13444
FRONT VIEW
PLAN VIEW
60”
SIDE VIEW
30”
4”
19.6”
26.5”
40”
36”
13.2”
6”
60”
1”
1”
40”
30”
51”
Cabinet Construction
The exterior cabinet top, front, and sides, are constructed of high quality stainless steel. The exterior back and bottom are constructed of coated steel. The cabinet interior
features stainless steel back, sides, and floor with a stainless steel top. One heavy duty epoxy coated shelf per section is standard. Mounted on anodized aluminum pilasters
the shelves are adjustable in ½” increments. Cabinet walls are insulated with 2” CFC free, foamed in place polyurethane. 6” polyolefin, stem casters (two with brakes) are
standard.
Drawer Construction
Drawer fronts are constructed of high grade stainless steel inside and out and drawers are insulated with 2” free foamed in place polyurethane. The bottom drawers will
accommodate 6” deep pans. Full size pans in the top drawer can be oriented longways from front to back or left to right. The top drawer will accommodate 4” deep pans
with either orientation. The top drawer will also accommodate 6” deep full-size pans when oriented longways from left to right and provide capacity for (2) ¼ size pans 4”
deep in the rear of the drawer. HS-5433 divider bar is recommended for this configuration. Drawer frames are formed of 16 gauge stainless steel and securely fastened in the
cabinet. The drawer slides are 16 gauge stainless steel with acetal rollers to prevent metal to metal contact between the drawer slides and reduce wear. The drawer slides have
a dynamic load capacity of 175 lbs. and have been life tested (fully loaded) three hundred thousand openings and closings without showing significant wear. The flush mount
handles are constructed of extruded aluminum. Snap-in magnetic drawer gaskets are durable and easily removed for cleaning.
Refrigeration System
The high efficiency refrigeration system is self-contained with an E-coated evaporator for extended life. Condensate removal is accomplished with an energy efficient nonelectric evaporation system. A capillary tube controls the flow of environmentally friendly R290 refrigerant through the evaporator. Refrigeration system utilizes an off-cycle
defrost to eliminate any ice on the evaporator coil. 115 volt units are equipped with a ten foot cord and plug (20.0 amps or less).
© HOSHIZAKI AMERICA, INC.
618 Hwy, 74 S., Peachtree City, GA 30269 | TEL 800-438-6087 | FAX 800-345-1325 | www.hoshizakiamerica.com
Loading...