Hoshizaki WR27AD2 Specifications

WR27A-D2
W x D x H
27” x 30” x 40”*
*with 6” casters
WR27A-D2
Item # 13458
Item #:
Project:
Qty:
AIA#:
Features
Engineered to maintain NSF-7
temperatures in 100°F ambient.
Stainless steel exterior front, sides, and top with stainless steel interior sides, back, and floor
Front breathing air flow design
11/27/18
Dimensions / Capacity
Interior Storage Capacity (CF) Interior Storage Capacity (CF) (AHAM) Overall Width x Depth (including 1” bumper) Height (including 6” casters) Depth with Drawer Fully Open (including 1” bumper) Crated Weight Crated Width x Depth x Height
Electrical / Refrigeration
Voltage HACR Breaker Electrical Connection Voltage Range Ambient Temp. Range Control Setpoint Range Amperage Energy Consumption Heat Rejection (BTU/Hr.) @NSF Approx. Nominal Compres. BTU/HR (HP) Refrigerant / Charge Amount (oz)
(NEMA)
(kWh/day) @NSF
One-Section WR27A-D2
3
7.21 ft
3
6.22 ft 27” x 31” 40” 51” 176 lbs.
31.5” x 34” x 40.5”
One-Section WR27A-D2
115/60/1
15.0 Amps 5-15P 104-126 45° to 100°F 32° to 52°F
2.6
1.34 190 988(1/6HP) R290 (2.3 oz)
• Environmentally friendly R290 hydrocarbon refrigerant
*
• Cabinet and drawers are insulated with 2” CFC free, foamed in place polyurethane
• Drawer slides are constructed of 16 gauge stainless steel with acetal rollers
• Drawer frames are formed of 16 gauge stainless steel and securely fastened in the cabinet
• Top drawers will accommodate (1) 12 x 20 full size pan and (2) ¼ size pans. Bottom drawer will accommodate (1) full size pan.
• Extruded aluminum flush mount drawer handle
• Magnetic drawer gasket is easily removable for cleaning
• E-coated evaporator coil
• Standard with 6” casters (two with brakes)
• 10 ft. cord and plug
Options
2.25” Casters 4” Casters
© HOSHIZAKI AMERICA, INC.
Warranty
3 Year - parts and Labor on
Overshelves Stainless steel back
618 Hwy, 74 S., Peachtree City, GA 30269 | TEL 800-438-6087 | FAX 800-345-1325 | www.hoshizakiamerica.com
*
entire machine.
5 Year - Parts on Compressor
Valid in United States, Canada, Puerto
Rico and U.S. Territories. Contact
factory for warranty in other countries.
Hoshizaki reserves the right to change specifications without notice.
WR27A-D2
WR27A-D2
11/27/18
Item # 13458
FRONT VIEW
PLAN VIEW
27”
SIDE VIEW
30”
4”
19.6”
36”
40”
6”
27”
1”
13.2”
26.5”
1”
40”
30”
51”
Cabinet Construction
The exterior cabinet top, front, and sides, are constructed of high quality stainless steel. The exterior back and bottom are constructed of coated steel. The cabinet interior features stainless steel back, sides, and floor with an ABS top. One heavy duty epoxy coated shelf per section is standard. Mounted on anodized aluminum pilasters the shelves are adjustable in ½” increments. Cabinet walls and doors are insulated with 2” of environmentally friendly, CFC free, foamed in place polyurethane. 4” polyolefin, stem casters (two with brakes) are standard.
Drawer Construction
Drawer fronts are constructed of high grade stainless steel inside and out and are insulated with 2” CFC free, foamed in place polyurethane. The bottom drawers will accommodate 6” deep pans. Full size pans in the top drawer can be oriented longways from front to back or left to right. The top drawer will accommodate 4” deep pans with either orientation. The top drawer will also accommodate 6” deep full-size pans when oriented longways from left to right and provide capacity for (2) ¼ size pans 4” deep in the rear of the drawer. HS-5433 divider bar is recommended for this configuration. Drawer frames are formed of 16 gauge stainless steel and securely fastened in the cabinet. The drawer slides are 16 gauge stainless steel with acetal rollers to prevent metal to metal contact between the drawer slides and reduce wear. The drawer slides have a dynamic load capacity of 175 lbs. and have been life tested (fully loaded) three hundred thousand openings and closings without showing significant wear. The flush mount handles are constructed of extruded aluminum. Snap-in magnetic drawer gaskets are durable and easily removed for cleaning.
Refrigeration System
The high efficiency refrigeration system is self-contained with an E-coated evaporator for extended life. Condensate removal is accomplished with an energy efficient non­electric evaporation system. A capillary tube controls the flow of environmentally friendly R290 refrigerant through the evaporator. Refrigeration system utilizes an “off cycle” defrost to eliminate any ice on the evaporator coil. 115 volt units are equipped with a ten foot cord and plug (20.0 amps or less).
© HOSHIZAKI AMERICA, INC.
618 Hwy, 74 S., Peachtree City, GA 30269 | TEL 800-438-6087 | FAX 800-345-1325 | www.hoshizakiamerica.com
Loading...