Hoshizaki KMS822MLJ Specifications
SERENITY SERIES CUBER ICE MACHINE
KMS-822MLJ
®
1
1
”
Modular Head Unit
W x D x H
22" x 24
Remote Unit Dimension
3/4
35
Installation Dimension*
38” x 29" x 37"
5/8
SRK-10J
1/2
” x 23
SRK-10J
*Dimensions include legs
SRK-10J
" x 28"
” x 22”
KMS-822MLJ
Remote Air-Cooled
Shown on optional
Lancer 22” Dispenser
KMS-822MLJ
06/26/18
Item # 13262
Item #:
Project:
Qty:
AIA#:
Features
Individual crescent cube
Stainless steel evaporator
TM
CycleSaver
• Up to 851 lbs. of ice production per 24 hours
• Durable stainless steel exterior
• Protected by H-GUARD Plus
Antimicrobial Agent
• EverCheckTM alert system
• No heat, less noise
• CFC / HFC Free Foam
• R-404A Refrigerant
• Not recommmended for side-by-side application
• Remote unit includes both condenser and
compressor
design
ICE PRODUCTION
Air / Water Temp
Condenser
Remote
Condenser
Remote
†
Line sets require refrigerant.
KMS-822MLJ with SRK-10J
Model
SRK-10J
Model
KM Edge Cube Dimensions
1/8
”
1/2
LINE SETS - Brazing Required
25’ Length
†
HS-0250
1/2
Lbs. per 24 hours
70°/ 50°F 90°/ 70°F
851
35’ Length
HS-0251† HS-0252
§
”
§
Printed in the U.S.A.
© HOSHIZAKI AMERICA, INC.
approximate size in inches, image not to scale
618 Hwy, 74 S., Peachtree City, GA 30269 | TEL 800-438-6087 | FAX 800-345-1325 | www.hoshizakiamerica.com
WATER USAGE
Potable
Gal. per 100 lbs.
90°/ 70°F 90°/ 70°F
770
55’ Length
†
21.0 N/A 120 /150208-230V/60/1*
TEMP RANGE
Ambient
(Outdoor Use)
-20° - 122°
Operating Limits-
• Ambient Temp Range 45 - 100°F
• Water Temp Range 45 - 90°F
• Water Pressure 10 - 113 PSIG
• Voltage Range 187-253V
Service-
• Allow 6” (15 cm) clearance at rear, sides, and top for
proper air circulation and ease of maintenance and/or
service should they be required.
• Panels easily removed and all components
accessible for service.
KMS-822MLJ
Condenser
Gal. per 100 lbs.
Voltage
Range
187-253VAC
KMS-822MLJ KMS-822MLJ
‡
Voltage supply for KMS Ice Maker is
supplied from the SRK Remote Condenser
Fuse/Breaker
‡
Min. Circuit
Amp. - Max
20A
kWh Used
per 100 lbs.
90°/ 70°F
ELECTRICAL
Warranty:
3 Year Parts & Labor on entire machine. 5 Year Parts & Labor on Evaporator.
5 Year Parts on Compressor; air-cooled condenser coil.
Valid in United States, Canada, Puerto Rico and U.S. Territories. Contact factory for
warranty in other countries.
Shipping: KMS-822MLJ (LxWxH)
ELECTRICAL
Voltage
5.3
Amperage
11.9A
Voltage
(including ground)
31” x 28” X 34” 17.08ft
Circuit
Wires
(including ground)
See remote
condenser
Circuit
Wires
Heat
Rejection
BTU/hr.
4
14,700208-230V/60/1
Power cord not included. Must be hard-wired at site.
Volume:
Refrigerant
Charge Amount
7.1 oz.
* Voltage supply for KMS Ice Maker is
supplied from the SRK Remote Condenser
Refrigerant
Charge Amount
13 lb. 10.7 oz.
Plumbing-
• Icemaker Water Supply Line: Minimum 1/4” Nominal ID
Copper Water Tubing or Equivalent
• Icemaker Drain Line: Minimum 3/4” Nominal ID Hard Pipe
or Equivalent
Service-
• Allow 24” (61 cm) clearance in both front and rear for proper
air circulation and ease of maintenance/service.
• For best performance the Remote Condenser should not be
more than 33 feet above the icemaker or no more than 10 feet
below it. These distances are measure from fitting to fitting.
SRK-10J
Hoshizaki reserves the right to change specifications without notice.
3
Net / Ship
Weight (lbs.)
Net / Ship
Weight (lbs.)
196 /226
SERENITY SERIES CUBER ICE MACHINE
KMS-822MLJ
KMS-822MLJ
06/26/18
Item # 13262
mm
[inches]
Front
SIDE VIEW FRONT VIEW
REAR VIEW
REMOTE AIR-COOLED
REMOTE AIR-COOLED
SRK-10J REMOTE CONDENSER
SRK-10J REMOTE CONDENSER
TOP VIEW
REMOTE AIR-COOLED
Front
BOTTOM VIEW
REMOTE AIR-COOLED
© HOSHIZAKI AMERICA, INC.
618 Hwy, 74 S., Peachtree City, GA 30269 | TEL 800-438-6087 | FAX 800-345-1325 | www.hoshizakiamerica.com
Liquid line
Brazed Line Sets
(Sold Separately)
25’ HS-0250
35’ HS-0251
55’ HS-0252
Voltage supply for the KMS Ice
Maker is supplied from the SRK
Remote Condenser.
SRK-10J Remote Condenser (Sold Separately)
3/4
35
Suction Line
1/2
” x 23
” x 37” (W x D x H with legs)
For Use with KMS-822MLJ
23.5”
38”
35.75”
29”
22”
37”
Electrical
supply hole
Wire harness
connection
Printed in the U.S.A.
Loading...