Hoshizaki KMD530MRH Specifications

W x D x H

®

KMD-530M_H

1

1

”

30" x 24

MODULAR CRESCENT CUBER

1/4

" x 22

1/8

"

KMD-530M_H

03/31/17

Item0 # 13350

Item #:

Project:

Qty:

AIA#:

Features

KMEdge

SERIES

KMD-530MAH

Air-Cooled

Shown on optional

Lancer 30” Dispenser

KMD-530MWH

Water-Cooled

KMD-530MRH

Remote Air-Cooled

Individual crescent cube

Stainless steel evaporator

CycleSaver

TM

design

• Up to 560 lbs. of ice production per 24 hours

• Ice on beverage design

• Durable stainless steel exterior

• Protected by H-Guard Plus
Antimicrobial Agent

• EverCheckTM alert system

• Removable air filters (Air-cooled model only)

• Front air inlet panels available for side-by-side
application (used with HS-5065)

• R-404A Refrigerant

Available on Bins:

B-250PF
B-500PF/SF

Top kit may be required. See Bin Spec Sheets.

Warranty:

3 Year Parts & Labor on entire machine. 5 Year Parts & Labor on Evaporator.
5 Year Parts on Compressor; air-cooled condenser coil.
Valid in United States, Canada, Puerto Rico and U.S. Territories. Contact factory for
warranty in other countries.

BD-500PF/SF
B-700PF/SF

B-800PF/SF
B-900PF/SF

TM

TM

B-1150SS
B-1300SS

ICE PRODUCTION

Condenser

Air-Cooled

Water-Cooled

Remote Air-Cooled

Model

KMD-530MAH

KMD-530MWH

KMD-530MRH

Air / Water Temp

Lbs. per 24 hours

70°/ 50°F 90°/ 70°F

553

462

540

520

560

488

KM Edge Cube Dimensions*

1/8

”

1/2

1/2

”

Printed in the U.S.A.

© HOSHIZAKI AMERICA, INC.

* approximate size in inches, image not to scale

618 Hwy, 74 S., Peachtree City, GA 30269 | TEL [phone] | FAX [phone] | www.hoshizakiamerica.com

WATER USAGE

Per Cycle

Lbs. Cubes

9.3

432

10

432

9.6

432

Potable

Gal. per 100 lbs.

90°/ 70°F 90°/ 70°F

17.1

20.9

16.5

Condenser

Gal. per 100 lbs.

N/A

102

N/A

kWh Used

per 100 lbs.

90°/ 70°F

5.7

4.4

5.8

Operating Limits

• Ambient Temp Range 45 - 100°F

• Water Temp Range 45 - 90°F

• Water Pressure 10 - 113 PSIG

• Voltage Range 104 - 127V

Service

• Panels easily removed and all components accessible
for service.

• For proper air circulation and ease of maintenance/service,
allow 6” (15 cm) clearance at rear, sides, and top for air,
water, and remote models. Allow 12” (30 cm) clearance at
right side for air-cooled models.

ELECTRICAL

Max. Fuse Size

or HACR

Circuit Breaker

20A

20A

20A

Amperage

12A

10.5A

12A

Voltage

115/60/1

115/60/1

115/60/1

Heat

Rejection

BTU/hr.

6,800

7,080

7,800

Shipping

Weight

170 lbs.

170 lbs.

170 lbs.

Plumbing

• Icemaker Water Supply Line: Minimum 1/4” Nominal ID
Copper Water Tubing or Equivalent

• Icemaker Drain Line: Minimum 3/4” Nominal ID Hard
Pipe or Equivalent
Water-Cooled Model (Lines Must Be Independent of Icemaker)

• Condenser Water Supply Line: Minimum 1/4” Nominal ID
Copper Water Tubing or Equivalent

• Condenser Drain/Return Line: Minimum 1/4” Nominal ID
Hard Pipe (open drain system) or Copper Water Tubing
(closed loop system) or Equivalent

Hoshizaki reserves the right to change specifications without notice.

ENERGY

STAR

®

MODULAR CRESCENT CUBER

KMD-530M_H

KMD-530M_H

03/31/17

Item # 13350

AIR-COOLED

WATER-COOLED REMOTE AIR-COOLED

Front Front Front

AIR-COOLED

WATER-COOLED

REMOTE AIR-COOLED

AIR-COOLED

Front

BOTTOM VIEW REAR VIEW SIDE VIEW FRONT VIEW

Bottom dimensions are common for all KMD-530 Models

© HOSHIZAKI AMERICA, INC.

AIR-COOLED Model Shown

618 Hwy, 74 S., Peachtree City, GA 30269 | TEL [phone] | FAX [phone] | www.hoshizakiamerica.com

REMOTE AIR-COOLEDWATER-COOLED

URC-5F Remote Condenser (Sold Separately)

For Use with KMD-530MRH

21/32

21

Air Flow

2 1/2

1 3/4

3

7/10

16

Voltage supply for the URC Remote Condenser is supplied
from the Ice Maker. No additional circuit is required.

Pre-Charged Tubing Kits

(Sold Separately)
20' R404-2046-2
35' R404-3546-2

URC-5F

21/32

21

17 1/8

18

32 13/16

1/4

Liquid Refrigerant
Line

Electrical
Conduit
Access

3/8

Discharge Line

Printed in the U.S.A.