KM-2500S_H3
03/31/17
Item # 13246
3 PHASE STACKABLE ICE CUBER
W x D x H
48" x 27
3/8
KM-2500SWH3
Water-Cooled 3 Phase
Shown on optional bin: B-900
KM-2500SRH3
Remote Air-Cooled 3 Phase
" x 36
7/16
"
Item #:
Project:
Qty:
AIA#:
Features
Individual crescent cube
Stainless steel evaporator
CycleSaverTM design
• Up to 2429 lbs. of ice production per 24 hours
• Stackable for 4858 lbs. per 24 hours ice production
in the same floor space
• Durable stainless steel exterior
• Protected by H-GUARD Plus
Antimicrobial Agent
®
TM
ICE PRODUCTION
Condenser
Water-Cooled
3 Phase
Remote Air-Cooled
Model
KM-2500SWH3
KM-2500SRH3
Air / Water Temp
Lbs. per 24 hours
70°/ 50°F 90°/ 70°F
2429
2365
2424
2235
KM Cube Dimensions*
1/8
”
1/2
1/2
”
Printed in the U.S.A.
© HOSHIZAKI AMERICA, INC.
* approximate size in inches, image not to scale
618 Hwy, 74 S., Peachtree City, GA 30269 | TEL 800-438-6087 | FAX 800-345-1325 | www.hoshizakiamerica.com
Per Cycle
Lbs. Cubes
47.1
46.1
Operating Limits
• Ambient Temp Range 45 - 100°F
• Water Temp Range 45 - 90°F
• Water Pressure 10 - 113 PSIG
• Voltage Range 187 - 253V
Service
• Panels easily removed and all components
accessible for service.
• Allow 6” (15 cm) clearance at rear, sides, and top
for proper air circulation and ease of maintenance/
service.
Potable
Gal. per 100 lbs.
90°/ 70°F 90°/ 70°F
2160
2160
WATER USAGE
Condenser
Gal. per 100 lbs.
17.2
18.6
127
N/A
kWh Used
per 100 lbs.
90°/ 70°F
3.54
4.50
• EverCheckTM alert system
TM
• R-404A Refrigerant
Available on Bins:
B-800
B-900
Warranty:
Valid in United States, Canada, Puerto Rico and U.S. Territories.
Contact factory for warranty in other countries.
Max. Fuse Size
or HACR
Circuit Breaker
30A
30A
B-1150SS
B-1300SS
ELECTRICAL
Amperage
14.2A
17.7A
B-1500SS
B-1650SS
Voltage
208-230V/60/3
208-230V/60/3
Top kit may be required.
See Bin Spec Sheets.
Heat
BTU/hr.
33,200
40,600
Shipping
Weight
415 lbs.
440 lbs.
Rejection
Plumbing
• Icemaker Water Supply Line: Minimum 3/8” Nominal ID
Copper Water Tubing or Equivalent
• Icemaker Drain Line: Minimum 3/4” Nominal ID Hard
Pipe or Equivalent
Water-Cooled Model (Lines Must Be Independent of Icemaker)
• Condenser Water Supply Line: Minimum 3/8” Nominal ID
Copper Water Tubing or Equivalent
• Condenser Drain/Return Line: Minimum 3/8” Nominal ID Hard
Pipe (open drain system) or Copper Water Tubing (closed loop
system) or Equivalent
Hoshizaki reserves the right to change specifications without notice.
ENERGY
STAR
®
3 PHASE STACKABLE ICE CUBER
WATER-COOLED REMOTE AIR-COOLED
KM-2500S_H3
03/31/17
Item # 13246
Front Front
REAR VIEW SIDE VIEW FRONT VIEW
WATER-COOLED
WATER-COOLED
Front Front
REMOTE AIR-COOLED
REMOTE AIR-COOLED
URC-23F Remote Condenser (Sold Separately)
(W x D x H) 46
3/8
1/16
For Use with KM-2100SRJ3
46
X 14
3/8
X 40
14 1/16
1/2
BOTTOM VIEW
WATER-COOLED
© HOSHIZAKI AMERICA, INC.
618 Hwy, 74 S., Peachtree City, GA 30269 | TEL 800-438-6087 | FAX 800-345-1325 | www.hoshizakiamerica.com
REMOTE AIR-COOLED
Air Flow
Pre-Charged Tubing Kits
(Sold Separately)
20' R404-20610
35' R404-35610
55’ R404-55610
17 1/4
URC-23F
45 5/8
5/8 Discharge Line
3/8 Liquid
Refrigerant Line
Voltage supply for the URC Remote
Condenser is supplied from the
Ice Maker. No additional circuit
is required.
15/16
25
1/2
40
Electrical
Conduit
Access
Printed in the U.S.A.