SELF-CONTAINED CUBER
WITH BUILT-IN STORAGE BIN
W x D x H
24" x 28" x 39”*
*including 6” legs
KMEdge
DESIGN
KM-231BAJ
Air-Cooled
Shown
ADA Compliant
KM-231BAJ
08/02/19
Item # 13555
Item #:
Project:
Qty:
AIA#:
Features
Individual crescent cube
Stainless steel evaporator
CycleSaver
TM
design
• Up to 213 lbs. of ice production per 24 hours
• Built-in storage capacity of 2.7ft3/80 lbs.*
• Durable stainless steel exterior
• Front-in, front-out airflow
• Removable air filter (Air-cooled model only)
• Ice bin opening is ADA compliant
• 6.5 ft. (2000 mm) power cord with NEMA 5-15P plug
• H-GUARD Plus Antimicrobial adds extra protection
to the ice scoop (included)
• EverCheckTM alert system
• R-404A Refrigerant
Warranty:
3 Year Parts & Labor on entire machine. 5 Year Parts & Labor on Evaporator.
5 Year Parts on Compressor; air-cooled condenser coil.
Valid in United States, Canada, Puerto Rico and U.S. Territories. Contact factory for
warranty in other countries.
Shipping: (LxWxH)
34” x 33” X 39” 25.32ft
Volume:
TM
TM
3
ICE PRODUCTION
Condenser
Air-Cooled
Model
KM-231BAJ
Air / Water Temp
Lbs. per 24 hours
70°/ 50°F 90°/ 70°F
213
KM Edge Cube Dimensions*
1/8
”
1/2
1/2
”
* approximate size in inches, image not to scale
© HOSHIZAKI AMERICA, INC.
618 Hwy, 74 S., Peachtree City, GA 30269 | TEL 800-438-6087 | FAX 800-345-1325 | www.hoshizakiamerica.com
WATER USAGE
Condenser
Gal. per 100 lbs.
kWh Used
per 100 lbs.
90°/ 70°F
8.423.5 N/A
147
Potable
Gal. per 100 lbs.
90°/ 70°F 90°/ 70°F
Operating Limits
• Ambient Temp Range 45 - 100°F
• Water Temp Range 45 - 90°F
• Water Pressure 10 - 113 PSIG
• Voltage Range 104 - 127V
Service
• Allow enough space at rear for water supply and
drain connections. Allow at least 2” (5 cm) on right
side for proper air circulation and at least 0.6” (15
mm) clearance at top for service/maintenance.
ELECTRICAL
Min. Circuit
Amp.-Max.
Fuse/Breaker
15A
Amperage
6.5A
Voltage
Heat
Rejection
BTU/hr.
3,750115V/60/1
Refrigerant
Charge Amount
11.3 oz.
Net / Ship
Weight (lbs.)
137 / 165
Plumbing
• Icemaker Water Supply Line: Minimum 1/4” Nominal ID
Copper Water Tubing or Equivalent
• Icemaker Drain Line: Minimum 3/4” Nominal ID Hard
Pipe or Equivalent
Water Filter
Please refer to water filter spec sheet for recommended configurations.
Hoshizaki reserves the right to change specifications without notice.
SELF-CONTAINED CUBER
WITH BUILT-IN STORAGE BIN
KM-231BAJ
08/02/19
Item # 13555
mm
[inch]
Front
FRONT VIEW
SIDE VIEW
mm(6.5 ft.)
REAR VIEW
© HOSHIZAKI AMERICA, INC.
618 Hwy, 74 S., Peachtree City, GA 30269 | TEL 800-438-6087 | FAX 800-345-1325 | www.hoshizakiamerica.com
TOP VIEW