KM-2100S_J3
03/08/16
Item # 13369
3 PHASE STACKABLE ICE CUBER
W x D x H
48" x 27
3/8
KM-2100SWJ3
Water-Cooled 3 Phase
Shown on optional bin: B-900
KM-2100SRJ3
Remote Air-Cooled 3 Phase
" x 36
7/16
"
Item #:
Project:
Qty:
AIA#:
Features
Individual crescent cube
Stainless steel evaporator
TM
CycleSaver
design
• Up to 2115 lbs. of ice production per 24 hours
• Stackable for 4230 lbs. per 24 hours ice production
in the same floor space
• Durable stainless steel exterior
TM
ICE PRODUCTION
Condenser
Water-Cooled
3 Phase
Remote Air-Cooled
Model
KM-2100SWJ3
KM-2100SRJ3
Air / Water Temp
Lbs. per 24 hours
70°/ 50°F 90°/ 70°F
2115
2085
1964
1865
KM Cube Dimensions*
1/8
”
1/2
1/2
”
Printed in the U.S.A.
© HOSHIZAKI AMERICA, INC.
* approximate size in inches, image not to scale
618 Hwy, 74 S., Peachtree City, GA 30269 | TEL 800-438-6087 | FAX 800-345-1325 | www.hoshizakiamerica.com
Per Cycle
Lbs. Cubes
46.9
46.9
Operating Limits
• Ambient Temp Range 45 - 100°F
• Water Temp Range 45 - 90°F
• Water Pressure 10 - 113 PSIG
• Voltage Range 187 - 253V
Service
• Panels easily removed and all components
accessible for service.
• Allow 6” (15 cm) clearance at rear, sides, and top
for proper air circulation and ease of maintenance/
service.
Potable
Gal. per 100 lbs.
90°/ 70°F 90°/ 70°F
2160
2160
WATER USAGE
Condenser
Gal. per 100 lbs.
19.3
19.0
106
N/A
kWh Used
per 100 lbs.
90°/ 70°F
3.16
4.16
• Protected by H-Guard Plus
Antimicrobial Agent
• EverCheckTM alert system
TM
• R-404A Refrigerant
Available on Bins:
B-800
B-900
Warranty:
Valid in United States, Canada, Puerto Rico and U.S. Territories.
Contact factory for warranty in other countries.
Max. Fuse Size
or HACR
Circuit Breaker
20A
20A
B-1150SS
B-1300SS
ELECTRICAL
Amperage
10.5A
12.5A
B-1500SS
B-1650SS
Voltage
208-230V/60/3
208-230V/60/3
Top kit may be required.
See Bin Spec Sheets.
Heat
BTU/hr.
31,500
30,800
Shipping
Weight
440 lbs.
440 lbs.
Rejection
Plumbing
• Icemaker Water Supply Line: Minimum 3/8” Nominal ID
Copper Water Tubing or Equivalent
• Icemaker Drain Line: Minimum 3/4” Nominal ID Hard
Pipe or Equivalent
Water-Cooled Model (Lines Must Be Independent of Icemaker)
• Condenser Water Supply Line: Minimum 3/8” Nominal ID
Copper Water Tubing or Equivalent
• Condenser Drain/Return Line: Minimum 3/8” Nominal ID Hard
Pipe (open drain system) or Copper Water Tubing (closed loop
system) or Equivalent
Hoshizaki reserves the right to change specifications without notice.
ENERGY
STAR
®
3 PHASE STACKABLE ICE CUBER
WATER-COOLED REMOTE AIR-COOLED
KM-2100S_J3
03/08/16
Item # 13369
WATER-COOLED
REAR VIEW SIDE VIEW FRONT VIEW
WATER-COOLED
Front Front
BOTTOM VIEW
WATER-COOLED
© HOSHIZAKI AMERICA, INC.
618 Hwy, 74 S., Peachtree City, GA 30269 | TEL 800-438-6087 | FAX 800-345-1325 | www.hoshizakiamerica.com
REMOTE AIR-COOLED
REMOTE AIR-COOLED
REMOTE AIR-COOLED
URC-22F Remote Condenser (Sold Separately)
Air Flow
17 1/4
Pre-Charged Tubing Kits
(Sold Separately)
20' R404-20610
35' R404-35610
55’ R404-55610
(W x D x H) 46
For Use with KM-2100SRJ3
3/8
46
URC-22F
45 5/8
3/8
1/16
X 40
14 1/16
15/16
25
Electrical
Conduit
Access
5/8 Discharge Line
1/2
1/2
40
Printed in the U.S.A.
X 14
3/8 Liquid
Refrigerant Line
Voltage supply for the URC Remote
Condenser is supplied from the
Ice Maker. No additional circuit
is required.