Hoshizaki FS1500MLJC Specifications

SERENITY SERIES CUBELET ICE MACHINE
FS-1500MLJ-C
Modular Head Unit
W x D x H
30" x 16
Remote Unit Dimension
35
Installation Dimension*
38” x 29" x 37"
Remote Air-Cooled
Shown on Lancer Sensation
1/2
” x 33"
SRC-14J
3/4
” x 23
1/2
” x 22”
SRC-14J
*Dimensions include legs
FS-1500MLJ-C
30” Dispenser
FS-1500MLJ-C
09/13/18
Item # 13282
Item #:
Project:
Qty:
AIA#:
Features
Durable stainless steel exterior
TM
Advanced CleanCycle24
Stainless steel auger with greaseless bearing
• Up to 1386 lbs. of ice production per 24 hours
• Durable stainless steel exterior
• EverCheckTM alert system
• Less heat in the kitchen
• Minimized noise
• 2-second flush cycle every hour
• Flush cycle removes sediment for cleaner ice
• Slim depth - easier to clean dispenser
• Front and back serviceability
• 8 ft. power cord with NEMA 5-15P plug
• R-404A Refrigerant
Warranty:
3 Year Parts & Labor on entire machine. 5 Year Parts on Compressor; air-cooled condenser coil. Valid in United States, Canada, Puerto Rico and U.S. Territories. Contact factory for warranty in other countries.
Shipping: (LxWxH)
35” x 23.25” X 39.5” 12.25ft
Volume:
design
3
TM
ICE PRODUCTION
Air / Water Temp
Condenser
Remote
Condenser
Remote
Line sets require refrigerant. Refer to instruction manual for installation and electrical requirements. See instruction manual for wiring diagram.
Model
SRC-14J
Model
FS-1500MLJ-C
LINE SETS - Brazing Required
25’ Length
HS-5323
Cubelet Cube Dimensions*
Lbs. per 24 hours
70°/ 50°F 90°/ 70°F
1386
35’ Length
HS-5324† HS-5325
1125
55’ Length
Operating Limits
• Ambient Temp Range 45 - 100°F
• Water Temp Range 45 - 90°F
• Water Pressure 10 - 113 PSIG
• Voltage Range 104-127V*
TEMP RANGE
Service
• Allow 6” (15 cm) clearance at rear, sides, and top for proper air circulation and ease of maintenance/service.
• Allow 24” (61 cm) clearance on left side for removal of cube guides
Printed in the U.S.A.
© HOSHIZAKI AMERICA, INC.
618 Hwy, 74 S., Peachtree City, GA 30269 | TEL 800-438-6087 | FAX 800-345-1325 | www.hoshizakiamerica.com
• Panels easily removed and all components accessible for service.
WATER USAGE ELECTRICAL
Potable
Gal. per 100 lbs.
90°/ 70°F 90°/ 70°F
12.0 N/A 3.5 oz. 182/222
Ambient
(Outdoor Use)
-4° - 122°
FS-1500MLJ-C
Condenser
Gal. per 100 lbs.
Voltage
Range
187-253VAC
FS-150MLJ-C FS-1500MLJ-C
* Voltage supply for FS Ice Maker is supplied from the SRC Remote Condenser
kWh Used
per 100 lbs.
90°/ 70°F
Min. Circuit Amp - Max.
Fuse/Breaker
20A
Amperage
4.75
ELECTRICAL
Amperage
10.1A
3.6A
Voltage
115V/60/1*
Voltage
Circuit
Wires
(including ground)
See remote
condenser
Circuit
Wires
(including ground)
4
Refrigerant
Charge Amount
* Voltage supply for FS Ice Maker is supplied from the SRC Remote Condenser
Heat
Rejection
BTU/hr.
15,300208-230V/60/1
Refrigerant
Charge Amount
10 lb. 12.8 oz.
Net / Ship
Weight (lbs.)
Net / Ship
Weight (lbs.)
190 /235
Power cord included.
Plumbing
• Icemaker Water Supply Line: Minimum 1/4” Nominal ID Copper Water Tubing or Equivalent
• Icemaker Drain Line: Minimum 3/4” Nominal ID Hard Pipe or Equivalent
Service-
• Allow 24” (61 cm) clearance in both front and rear for proper air circulation and ease of maintenance/service.
• For best performance the Remote Condenser should not be more than 33 feet above the icemaker or no more than 10 feet below it. These distances are measure from fitting to fitting.
SRC-14J
Hoshizaki reserves the right to change specifications without notice.
SERENITY SERIES CUBELET ICE MACHINE
FS-1500MLJ-C
FS-1500MLJ-C
09/13/18
Item # 13282
inches
[mm]
Front
FRONT VIEW
SIDE VIEW
FS-1500MLJ-C
FRONT VIEW
FS-1500MLJ-C
Front
BOTTOM VIEW REAR VIEW
FS-1500MLJ-C
© HOSHIZAKI AMERICA, INC.
618 Hwy, 74 S., Peachtree City, GA 30269 | TEL 800-438-6087 | FAX 800-345-1325 | www.hoshizakiamerica.com
SRK-14J REMOTE CONDENSER
(W x D x H) 37
Suction Line
Liquid Line
Brazed Line Sets
(Sold Separately) 25’ HS-5323 35’ HS-5324 55’ HS-5325
Voltage supply for the FS Ice Maker is supplied from the SRC Remote Condenser.
SRC-14J Remote Condenser (Sold Separately)
3/4
5/8
x 26
For Use with FS-1500MLJ-C
23.5”
37.75”
x 37 (including legs)
35.75”
26.63”
22”
37”
Supply hole
Electrical
Printed in the U.S.A.
Loading...