Hoshizaki FS1001MLHC Specsheet

SERENITY SERIES CUBELET ICE MACHINE
FS-1001MLH-C
W x D x H
30" x 11" x 26"
FS-1001MLH-C
03/31/17
Item # 13165
Item #:
Project:
Qty:
AIA#:
Installation Dimension*
SRC-10H
28
1/4
” x 25
3/8
7/8
" x 34
*Dimensions include legs
"
Actual Dimension
SRC-10H
1/4
28
FS-1001MLH-C
Remote Air-Cooled
” x 25
Shown
3/8
” x 19
7/8
Features
Durable stainless steel exterior
Advanced CleanCycle24TM design
Stainless steel auger with greaseless bearing
• Up to 830 lbs. of ice production per 24 hours
• Durable stainless steel exterior
• EverCheckTM alert system
• Less heat in the kitchen
• Minimized noise
• 2 second flush cycle every hour
• Flush cycle removes sediment for cleaner ice
• Slim depth - easier to clean dispenser
• Front and back serviceability
• R-404A Refrigerant
ICE PRODUCTION
Condenser
Remote Air-Cooled
Condenser
Remote
Model
FS-1001MLH-C
Model
SRC-10H
Cubelet Cube Dimensions*
Air / Water Temp
Lbs. per 24 hours
70°/ 50°F 90°/ 70°F
830
705
LINE SETS - PRE-CHARGED
20’ Length
R404-20410
Type of Ice
(Hardness Rating)
Cubelet (80)
35’ Length
R404-35410
Operating Limits
• Ambient Temp Range 45 - 100°F
• Water Temp Range 45 - 90°F
• Water Pressure 10 - 113 PSIG
• Voltage Range 187-253V*
Service
• Allow 6” (15 cm) clearance at rear, sides, and top for proper air circulation and ease of maintenance/service.
• Allow 24” (61 cm) clearance on left side for removal of cube guides
Printed in the U.S.A.
© HOSHIZAKI AMERICA, INC.
618 Hwy, 74 S., Peachtree City, GA 30269 | TEL 800-438-6087 | FAX 800-345-1325 | www.hoshizakiamerica.com
• Panels easily removed and all components accessible for service.
Warranty:
3 Year Parts & Labor on entire machine. 5 Year Parts on Compressor; air-cooled condenser coil. Valid in United States, Canada, Puerto Rico and U.S. Territories. Contact factory for warranty in other countries.
WATER USAGE
Potable
Gal. per 100 lbs.
90°/ 70°F 90°/ 70°F
12.0 N/A 15A 1130 166 lbs.
55’ Length
R404-55410
FS-1001MLH-C
Condenser
Gal. per 100 lbs.
TEMP RANGE
Ambient
(Outdoor Use)
-4 - 122°
FS-1001MLH-C FS-1001MLH-C
* Voltage supply for FS Ice Maker is supplied from the SRC Remote Condenser
kWh Used
per 100 lbs.
90°/ 70°F
5.96
Voltage
Range
187-253VAC
ELECTRICAL
Max. Fuse Size
or HACR
Circuit Breaker
Max. Fuse Size
or HACR
Circuit Breaker
20A
Amperage
15A
ELECTRICAL
Amperage
20A
Voltage
115V/60/1*
Voltage
Rejection
BTU/hr.
* Voltage supply for FS Ice Maker is supplied from the SRC Remote Condenser
Rejection
BTU/hr.
10,500 169 lbs.208-230V/60/1
Plumbing
• Icemaker Water Supply Line: Minimum 1/4” Nominal ID Copper Water Tubing or Equivalent
• Icemaker Drain Line: Minimum 3/4” Nominal ID Hard Pipe or Equivalent
Service-
• Allow 24” (61 cm) clearance in both front and rear for proper air circulation and ease of maintenance/service.
• For best performance the Remote Condenser should not be more than 33 feet above the icemaker or no more than 10 feet below it. These distances are measure from fitting to fitting.
SRC-10H
Hoshizaki reserves the right to change specifications without notice.
Heat
Heat
Shipping
Weight
Shipping
Weight
ENERGY
STAR
ENERGY
STAR
®
®
SERENITY SERIES CUBELET ICE MACHINE
FS-1001MLH-C
REMOTE AIR-COOLED
FS-1001MLH-C
03/31/17
Item # 13165
mm
[inches]
Front
REMOTE AIR-COOLED
REMOTE AIR-COOLED
Front
SRC-10H Remote Condenser (Sold Separately)
(W x D x H) 28
For Use with FS-1022MLH-C
1/4
x 25
3/8
x 34
7/8
BOTTOM VIEW REAR VIEW SIDE VIEW FRONT VIEW
REMOTE AIR-COOLED
© HOSHIZAKI AMERICA, INC.
618 Hwy, 74 S., Peachtree City, GA 30269 | TEL 800-438-6087 | FAX 800-345-1325 | www.hoshizakiamerica.com
Pre-Charged Tubing Kits
(Sold Separately) 20’ R404-20410 35’ R404-35410 55’ R404-55410
Voltage supply for the FS Ice Maker is supplied from the SRC Remote Condenser.
Printed in the U.S.A.
Loading...