Hoshizaki DKM-500BWH Manuel d’installation

HoshizakiHoshizaki America, Inc.

“A Superior Degree

of Reliability”

www.hoshizaki.com

Crescent Cube Icemaker / Dispenser

Models

DKM-500BAH, BWH

INSTRUCTION MANUAL

Issued: 2-16-2015

WARNING

Only qualified service technicians should install and service the appliance. To obtain the name and phone number of your local Hoshizaki Certified Service

Representative, visit www.hoshizaki.com. No installation or service should be undertaken until the technician has thoroughly read this Instruction Manual. Likewise, the owner/manager should not proceed to operate the appliance until the installer has instructed them on its proper operation. Failure to install, operate, and maintain the appliance in accordance with this manual will adversely affect safety, performance, component life, and warranty coverage and may result in costly water damage. Proper installation is the responsibility of the installer. Product failure or property damage due to improper installation is not covered under warranty.

Hoshizaki provides this manual primarily to assist qualified service technicians in the installation, maintenance, and service of the appliance.

Should the reader have any questions or concerns which have not been satisfactorily addressed, please call, send an e-mail message, or write to the Hoshizaki Technical Support Department for assistance.

Phone: [phone]

Fax: [phone]

E-mail: [e-mail]

HOSHIZAKI AMERICA, INC.

618 Highway 74 South

Peachtree City, GA 30269

Attn: Hoshizaki Technical Support Department

NOTE: To expedite assistance, all correspondence/communication MUST include the following information:

•Model Number

•Serial Number

•Complete and detailed explanation of the problem.

2

IMPORTANT

This manual should be read carefully before the appliance is installed and operated. Read the warnings and guidelines contained in this manual carefully as they provide essential information for the continued safe use and maintenance of the appliance. Retain this manual for any further reference that may be necessary.

CONTENTS
Important Safety Information..................................................................................................	4
I. Specifications......................................................................................................................	6
A. Electrical and Refrigerant Data......................................................................................	6
B. Dimensions/Connections...............................................................................................	7
1. DKM-500BAH...........................................................................................................	7
2. DKM-500BWH..........................................................................................................	8
II. Installation and Operating Instructions...............................................................................	9
A. Location.........................................................................................................................	9
B. Checks Before Installation...........................................................................................	10
C. How to Remove Panels.................................................................................................	11
D. Setup...........................................................................................................................	12
E. Electrical Connection...................................................................................................	13
F. Water Supply and Drain Connections...........................................................................	14
1. Icemaker.................................................................................................................	15
2. Water-Cooled Condenser.......................................................................................	16
G. Final Checklist.............................................................................................................	18
H. Startup.........................................................................................................................	19
III. Maintenance....................................................................................................................	21
A. Maintenance Schedule................................................................................................	21
B. Cleaning and Sanitizing Instructions............................................................................	22
1. Cleaning Procedure – Icemaker..............................................................................	22
2. Sanitizing Procedure – Icemaker............................................................................	24
3. Cleaning Procedure – Storage Bin.........................................................................	24
4. Sanitizing Procedure – Storage Bin........................................................................	24
IV. Preparing the Appliance for Periods of Non-Use.............................................................	26
V. Disposal............................................................................................................................	28

3

Important Safety Information

Throughout this manual, notices appear to bring your attention to situations which could result in death, serious injury, damage to the appliance, or damage to property.

WARNING	Indicates a hazardous situation which could result in death or
	serious injury.
NOTICE	Indicates a situation which could result in damage to the
	appliance or property.
IMPORTANT	Indicates important information about the installation, use, and
	care of the appliance.

WARNING

The appliance should be destined only to the use for which it has been expressly conceived. Any other use should be considered improper and therefore dangerous. The manufacturer cannot be held responsible for injury or damage resulting

from improper, incorrect, and unreasonable use. Failure to install, operate, and maintain the appliance in accordance with this manual will adversely affect safety, performance, component life, and warranty coverage and may result in costly water damage.

To reduce the risk of death, electric shock, serious injury, or fire, follow basic precautions including the following:

•Only qualified service technicians should install and service the appliance.

•The appliance must be installed in accordance with applicable national, state, and local codes and regulations.

•The appliance requires an independent power supply of proper capacity. See

the nameplate for electrical specifications. Failure to use an independent power supply of proper capacity can result in a tripped breaker, blown fuse, damage to existing wiring, or component failure. This could lead to heat generation or fire.

•THE APPLIANCE MUST BE GROUNDED: The appliance is equipped with a NEMA 5-15 three prong grounding plug to reduce the risk of potential shock hazards. It must be plugged into a properly grounded, independent 3-prong wall outlet. If the outlet is a 2-prong outlet, it is your personal responsibility to have a qualified electrician replace it with a properly grounded, independent 3-prong

wall outlet. Do not remove the ground prong from the power cord and do not use an adapter plug. Failure to properly ground the appliance could result in death or serious injury.

•Do not use an extension cord.

•To reduce the risk of electric shock, do not touch the control switch, service switch, or plug with damp hands. Make sure the control switch is in the "OFF" position before plugging in or unplugging the appliance.

•Do not use an appliance with a damaged power cord. The power cord should not be altered, jerked, bundled, weighed down, pinched, or tangled. Such actions could result in electric shock or fire. To unplug the appliance, be sure to pull the plug, not the cord, and do not jerk the cord.

4

WARNING, continued

•Do not make any alterations to the appliance. Alterations could result in electric shock, injury, fire, or damage to the appliance.

•The appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

•Children should be properly supervised around the appliance.

•Do not climb, stand, or hang on the appliance or allow children or animals to do so. Serious injury could occur or the appliance could be damaged.

•Do not use combustible spray or place volatile or flammable substances near the appliance. They might catch fire.

•Keep the area around the appliance clean. Dirt, dust, or insects in the appliance could cause harm to individuals or damage to the appliance.

NOTICE

•Follow the water supply, drain connection, and maintenance instructions carefully to reduce the risk of costly water damage.

•In areas where water damage is a concern, install in a contained area with a floor drain.

•Install the appliance in a location that stays above freezing. Normal operating ambient temperature must be within 45°F to 100°F (7°C to 38°C). If the normal operating ambient temperature is above 90°F (32°C), the compressor insulation cover must be removed.

•Do not leave the appliance on during extended periods of non-use, extended absences, or in sub-freezing temperatures. To properly prepare the appliance for these occasions, follow the instructions in "IV. Preparing the Appliance for Periods of Non-Use."

•Do not place objects on top of the appliance.

•The storage bin is for ice use only. Do not store anything else in the storage bin.

5

I. Specifications

A. Electrical and Refrigerant Data

The rating label and nameplate provide electrical and refrigerant data. The rating label can be seen by removing the front panel. The nameplate is located on the rear panel. For certification marks, see the nameplate.

We reserve the right to make changes in specifications and design without prior notice.

Model Number	DKM-500BAH	DKM-500BWH
AC Supply Voltage	115-120/60/1	115-120/60/1
Amperes	13.3 AMPS	12 AMPS
Design Pressure	HI-467PSI LO-170PSI	HI-427PSI LO-230PSI
Refrigerant	404A 1 LB. 12.2 OZ.	404A 1 LB. 2 OZ.

6

B. Dimensions/Connections

1. DKM-500BAH

Unit: mm [in.]

7

2. DKM-500BWH

Unit: mm [in.]

8

II. Installation and Operating Instructions

WARNING

•The appliance must be installed in accordance with applicable national, state, and local codes and regulations.

•Failure to install, operate, and maintain the appliance in accordance with this manual will adversely affect safety, performance, component life, and warranty coverage and may result in costly water damage.

•CHOKING HAZARD: Ensure all components, fasteners, and thumbscrews

are securely in place after installation. Make sure that none have fallen into the storage bin.

A. Location

NOTICE

•The appliance is not intended for outdoor use. Normal operating ambient temperature must be within 45°F to 100°F (7°C to 38°C). If the normal operating ambient temperature is above 90°F (32°C), the compressor insulation cover must be removed. Normal operating water temperature must be within 45°F to 90°F (7°C to 32°C). Operation of the appliance, for extended periods, outside of these normal temperature ranges may affect appliance performance.

•The appliance will not work at sub-freezing temperatures. To prevent damage

to the water supply line, drain the appliance if the air temperature is going to go below 32°F (0°C). See "IV. Preparing the Appliance for Periods of Non-Use."

•The appliance should not be located next to ovens, grills, or other high heat producing equipment.

•On air-cooled model, allow at least 12" (30 cm) clearance on the left side and 6" (15 cm) clearance at rear, right side, and top for proper air circulation and ease of maintenance and/or service should they be required. On water-cooled model, allow 6" (15 cm) clearance at rear, sides, and top.

•The location should provide a firm and level foundation for the appliance.

9

B.Checks Before Installation

•Visually inspect the exterior of the shipping container and immediately report any damage to the carrier. Upon opening the container, any concealed damage should also be immediately reported to the carrier.

•Remove the shipping carton, tape, and packing material. If any are left in the appliance, it will not work properly.

•See the nameplate on the rear panel, and check that your voltage supplied corresponds with the voltage specified on the nameplate.

•Remove the panels to prevent damage when installing the appliance. See "II.C. How to

Remove Panels."

•Remove the package containing the accessories.

•Remove the protective plastic film from the panels. If the appliance is exposed to the sun or to heat, remove the film after the appliance cools.

•Check that the refrigerant lines do not rub or touch lines or other surfaces, and that the fan blade (if applicable) turns freely.

•Check that the compressor is snug on all mounting pads.

10