Page 1
User Manual
Model: L130 | Colour Change
Solar Wall Light 5LED - 2 Pack
Lighting Modes
1. Constant white light
2. Colour lighng - Mulple colours
fade in and out. Gradually
switches between red, green,
blue, yellow, pink and white.
Step 1 - Find a suitable location
Solar lights need access to direct
sunlight for opmum results,
preferably 6-8 hours per day.
Step 2 - Mounting the solar light
Note: If the light does not
turn on this could be due to
the baery not being charged.
Leave out in direct sunlight for
6 – 8 hours and try again.
Make a statement with
this colour-changing solar
wall light perfect for
highlighng ower beds
and entertaining areas.
Product Installation - OPTION 1
Adhere using Hoselink Outdoor
Acrylic Double Sided Tape
(SKU L100).
Product Installation - OPTION 2
Mount onto the wall/fence using
supplied plugs and screws. To do this
please follow the steps below:
Use a 6mm drill piece for masonry
installaon. Gently hammer the
plugs into place and then secure the
screws ghtly. For mber use a 3mm
drill piece without the plugs.
Step 3 - Turn on the light
To acvate the light, turn on the
switch on the back of the unit.
Test by covering the solar panel
completely to check that the light
comes on. The light is now ready
for use.
For more informaon visit
www.hoselink.com.au
or call 1300 900 617
Loading...