Horton LH, RH, LHR, RHR, LH-RH Owner's Manual

...
A Member of
AAADM
American Association of Automatic Door Manufacturers
AUTOMATIC FOLDING DOOR
OWNER'S MANUAL
Distributed by:
Section Page
Caution 2 To Our Customers 2 Service Availability 2 Compliance with Safety Standards 2 What You Should Know 3 Folding Door Configurations & Requirements 3 Daily Safety Check 4 thru 5 General Safety 5 thru 7 Limited Warranty 8
To Our Customers
The purpose of this manual is to familiarize you with your automatic door system. It is essential that you know your system and that you recognize the importance of maintaining your door system in compliance with the industry standards for safety as outlined in the ANSI A156.10 - 1999 American National Standard for Power Operated Pedestrian Doors. Your local Horton Automatics service representative will be familiar with the aforementioned
standards, as well as all applicable local codes and Horton Automatics recommendations for power operated pedestrian doors. Maintenance and adjustments performed by this service representative/technician will ensure safe and proper operation of the automatic door unit.
Service Availability
Horton Automatics’ products are manufactured at the plant’s facilities in Corpus Christi, Texas and Telford, England. A worldwide network of authorized independent distributors offers both installation and service. For the Horton Automatics distributor in your area call 1-800-531-3111 or consult the Yellow Pages of your local telephone directory under “Door­Operating Devices.” In Europe, call the plant in Telford, England at 011-44-1952-670169.
Compliance with Safety Standards
Your door system was designed to the latest operating and safety standards. In addition to the above recommendations and to ensure the continued safe operation of your door, it is important that proper decals and labels be applied and maintained on your doors ( see page 6 of this owners manual for specific decal instruction ). If decals are removed or cannot be read, request labels to be replaced when calling for service.
*NOTE: AAADM, the American Association of Automatic Door Manufacturers, has
extablished a program to certify automatic door inspectors. Through this program, the inspectors are trained to check the door systems for compliance with the appropriate version of the American National Standards Institute standard A156.10.
2
7.097d
! CAUTION
• Failure to follow instructions can result in an improperly adjusted door and can, consequently, cause injury and damage to equipment and property.
• Inspect door operation daily using the “Daily Safety Check” of this Owner’s Manual and at door. Safety devices should be in place and operational.
• Should the door fail to operate as prescribed in the “Daily Safety Check” of this Owner’s Manual or if a potentially hazardous situation is suspected, the door should be taken out of automatic service until a professional inspection is made and the problem is corrected.
DO NOT ATTEMPT TO REPAIR OR ADJUST THE DOOR YOURSELF.
• Have door and all safety devices inspected at least annually by an AAADM * certified inspector.
What You Should Know
Your local Horton Automatics distributor should provide you with the following for each door after installation:
1. Instructions on how to conduct the “Daily Safety Check” by walk-through example NOTE: AAADM Daily Safety Check videos are available.
Contact your local distributor or AAADM.
2. Location of “Automatic/Off/Hold-Open” Rocker Switch.
3. Locations and use of Circuit Breakers.
4. Discussion of problems that could result from door being allowed to operate after a malfunction is observed.
NOTE: If there are any problems, discontinue door operation immediately
and secure
in a safe manner. Call your local distributor for repair.
5. AAADM compliance certificate signed by an AAADM certified automatic door inspector.
6. This M-Fold Owners Manual with the following items filled in: _____________Phone number to call regarding problems or request for service _____________Date equipment shipped from Horton plant _____________Date equipment placed in service _____________Horton Automatics’ invoice number for Warranty reference and repairs _____________Equipment type (door series) & Accessories ______________________ ______________________________________________________________________ ______________________________________________________________________
Folding Door Configurations and Requirements
Folding doors are installed in a large number of combinations:
• Doors Fold In (LH, RH) or Doors Fold Out (LHR, RHR) NOTE: Emergency Breakout standard for both.
• Single Folding Door (LH, RH, LHR, RHR) or Pair of Folding Doors (LH-RH, LHR-RHR)
• One-Way Traffic or Two-Way Traffic
• Activated by Floor Mat, Sensors, or Push Switches
Regardless of the door configuration, the following safety items are always required:
• A Safety Zone (sensors, mats) to cover the area of door travel.
• Guide rails on the fold side of the doors (unless a wall is in the same position)
This manual presents a broad view of the most popular types. It covers the basic principles to check your doors for safety. For questions, call your local service representative.
3
7.098d
Loading...
+ 5 hidden pages