Horton 4100 User Manual
A U T O M A T I C S
®
4242 Baldwin Boulevard
Corpus Christi, Texas
USA 78405-3399
Tel: 800-531-3111, 361-888-5591
Fax: 800-531-3108, 361-888-6510
www.hortondoors.com
The Automatic Cho ice
SPECIFICATION DETAILS
AUTOMATIC SWING DOORS
Optional Full Access Header for Series 4100 HD-Swing
Surface Applied, Single & Pair, Inswing & Outswing
®
B3.0
July 10
Standard Packages
Single Units
Types: LH, RH, LHR, RHR
Door Width
3'-0" (914)
3'-6" (1067)
Header Width
3'-3" (991)
3'-9" (1143)
Anodized Finish:
Door Pair Width
5'-0" (1524)
6'-0" (1829)
7'-0" (2133)
Clear or Dark Bronze
Pair Units
Types: LH-RH, LHR-RHR
Header Width
5'-3" (1600)
6'-3" (1905)
7'-3" (2210)
Installation and Operation
Swing door header is surf ace mounted onto frame and connecting arm
assembly is mounted to face of door panel. Frame and door panel to be
provided by others.
Electrical: Provide 120 VAC , 60 cycle, single phase, 15 amp serv ice
(in conduit) to each swing door unit on a dedicated 20 amp circuit
breaker routed into header. Maximum current draw is 3.15 amps
(see page B1.4).
Unit to be actuated by Vista™ Sensor Sytem (for 1-way traffic). System
includes motion sensor, swing-side safety sensor and photo beam
mounted beyond the swing of the door (see page B1.5)
6 3/16" (157)
11/2"
(38)
Header Width
Door Width
1
Outswing
11/2"
(38)
Power
Supply
Outswing
Guide Rail
Exterior
1 5/8"
Mounting
Foot
Door panel and frame
by others
(41)
Exterior
Door panel
and
fram e by
others
3/4"
Series 4000
Electric
Operator
Connecting Arm Assembly
Backmember
C3323
3/4"
Vertical Section '1'
6 3/16" (157)
Series 4000
Electric
Backmember
Operator
3/4"
Mounting Foot
Vertical Section '2'
6 3/16" (157)
C2287 Access Panel
Outswing Power Arm
6 3/16" (157)
C2287 Access Panel
Inswing Power
Connecting Arm Assembly
Arm
Single Units
Floor Plans with Elevations
LHR & RHR shown. LH & RH are Inswing
Header Width
11/2"
(38)
Door Pair Width
Power Supply
2
Inswing
Guide Rail
Pair Unit
Floor Plan with Elevation
LH-HR shown. LHR-RHR is Outswing
Horton Automatics reserv es the right to alter i ts product and specificat ions without
notice. Dimensions giv en in U.S. inches foll owed by millimet ers in parenthesis.
Loading...