Horstmann HCT2 Data Sheet
HCT2
Hot Water Cylinder Thermostat
This cylinder thermostat is fitted to the hot water cylinder to
ensure that water temperature is controlled to a safe
temperature whilst also saving energy by stopping
uncontrolled heating of the hot water.
This type of cylinder stat is intended for use as part of a fully
pumped heating and hot water system
in conjunction with motorised zone valves a room
thermostat and a two channel central heating programmer.
Ÿ 230V mains operation
Ÿ Adjustable temperature range 20°C to 90°C
Ÿ 16 Amp changeover (S.P.D.T.) contacts
Ÿ Switching differential of approximately 8°C
Ÿ Bimetallic sensor system
Specification
Cylinder Thermostat – HCT2
With an adjustable temperature range of between 20°C
to 90°C, the Horstmann cylinder thermostat is suitable
for mounting on either domestic hot water cylinders or
large heating pipes.
CONTACT CONFIGURATION SPDT
OPERATING VOLTAGE 220/240V 50/60Hz
SWITCH CURRENT 250V AC
16 Amps maximum
TEMPERATURE RANGE +20 °c to +90 °C
SWITCHING DIFFERENTIAL +8 °C Approx
ENCLOSURE PROTECTION IP40
SENSOR SYSTEM Bimetallic
DIMENSIONS 105 x 70 x 53 mm
South Bristol Park, Roman Farm Road, Bristol BS4 1UP
t: +44 117 978 8700 | f: +44 117 9788701 | e: sales@horstmann.co.uk | www.horstmann.co.uk
Horstmann is a trading name of Secure Controls (UK) Ltd., a wholly owned subsidiary of Secure Holdings PTE Ltd.
Registered office: Secure House, Moorside Road, Winnall Trading Estate, Winchester, Hampshire, SO23 7RX. Registered in England No. 457553
© January 2013: Secure Controls (UK) Ltd: All rights reserved. The company reserves the right to alter product specifications without notice.
Part No. P81267 Issue 1
Loading...