horsch Tiger MT, Tiger AS Operation Manual

This does not replace the operating instructions!

Pay attention to the safety instructions and warnings in the operating instructions!
Keep the operating instructions on board.
Operators must have read and understood the complete operating instructions before working with the machine!

Tiger AS / MT with slewing undercarriage
Wings operation

Unfolding

1. Set the rotary spool valve on the drawbar to Field.

2. Lift out the machine.

3. Retract the undercarriage or swivel it up.

4. Unfold the machine.

5. Adjust the working depth.

- Place the aluminium clips on the hydraulic cylinders for
lift/lower.

- Place the same number and colour of clips on both
hydraulic cylinders.

6. Adjust the pendulum compensation.

Hydraulic cylinder undercarriage, outside

Hydraulic cylinder, undercarriage centre

- Add aluminium clips to the hydraulic cylinders of the
undercarriage.

Art. No.: 80580208

1 / 2

Tiger AS / MT with slewing undercarriage
Wings operation

Folding

1. Lift out the machine.

2. Remove the aluminium clips from the hydraulic cylinders

of the undercarriage.

Hydraulic cylinder undercarriage, outside

Hydraulic cylinder, undercarriage centre

3. Fold the machine.

4. Extend the undercarriage or swivel it up.

5. Set the rotary spool valve on the drawbar to Road.

6. Adjust the transport height.

Hydraulic cylinder Lift/Lower

Hydraulic cylinder for drawbar

- Place aluminium clips on the hydraulic cylinders for lift/

lower and drawbar.

- Lower the machine to the aluminium clips.

- Check transport height and ground clearance and

adjust, if necessary.

Art. No.: 80580208

2 / 2