horsch SW 750, SW 1000 Owner's Manual
Seed Wagon
Issued January 2015
Owner’s Manual
Serial Numbers:
Seed Wagon Owner’s Manual - Ver. 1.5 02/2016
SW 750 / 1000
200 Knutson St. Mapleton, ND 58059 USA (T) 855-4HORSCH (F) 701-532-1101 (E) info.us@horsch.com
www.horsch.com
SW750 SN 230075015001 – Current
SW1000 SN 2300100015001 – Current
www.horsch.com
Ver. 1.1 01/2015
2 Seed Wagon Owner’s Manual – Version 1.5 02/2016
www.horsch.com
Seed Wagon Owner’s Manual – Version 1.5 02/2016 3
www.horsch.com
Contents
Introduction - Safety & Guidelines .............................................................................................. 8
Machine Registration (Important Notice to Dealer/Owner!) ........................................................ 8
Warranty Guidelines................................................................................................................... 9
Machine Registration Form: Customer’s Copy ..........................................................................11
Machine Registration Form: Dealer’s Copy ...............................................................................13
Machine Registration Form: HORSCH’s Copy ..........................................................................15
Delivery Form: DEALERS’s Copy .............................................................................................17
Product Specification ................................................................................................................19
In These Operating Instructions ................................................................................................20
Authorized Operators ................................................................................................................20
Protective Clothing ....................................................................................................................20
Infor mation Regarding Saf ety ....................................................................................................21
Safety Symbols on the Machine: ...............................................................................................22
Use for the Intended Purpose ...................................................................................................32
Operational Safety ....................................................................................................................32
Road Traffic Safety ...................................................................................................................34
Hydraulic System ......................................................................................................................35
Pressure Accumulator ...........................................................................................................36
Electrical System ......................................................................................................................36
Extracting Stuck Machine Safety & Guidelines ..........................................................................37
Service and Maintenance ..........................................................................................................37
Transport & Installation .............................................................................................................39
Connecting the ISO Bus System ...............................................................................................40
Connecting the Hydraulic System .............................................................................................40
Connecting the Road Lighting Equipment .................................................................................41
Technical Data ..........................................................................................................................42
Configuration ............................................................................................................................43
Undercarriage & Track System Specifications ..........................................................................44
Description – SW (Seed Wagon) ..............................................................................................45
Seed Tank .............................................................................................................................45
Axle .......................................................................................................................................45
4 Seed Wagon Owner’s Manual – Version 1.5 02/2016
www.horsch.com
Tire Specifications .................................................................................................................45
Seed Wagon Tank Fill Lid Adjustment ......................................................................................46
Pneumatic System ....................................................................................................................47
Hydraulic Fan ........................................................................................................................48
Technical Data: .....................................................................................................................49
Mode of Operation .................................................................................................................49
Adjusting Fan RPM................................................................................................................50
Retightening the Fan Impeller ................................................................................................50
Adjustment of Fan Sensor .....................................................................................................51
Air System ................................................................................................................................52
Half Width Module – Actuator and Sensor, ISO .....................................................................53
Metering Unit w/ Hydraulic Motor ...........................................................................................53
Rotors for Various Grain Types .............................................................................................54
Meter Roller Alignment ..........................................................................................................55
Roller Seed Rate Chart .........................................................................................................56
Roller Replacement ...............................................................................................................59
Roller Replacement with Full Tank ........................................................................................60
Assembly Instructions ............................................................................................................61
Functional Test ......................................................................................................................62
Canola Brushes .....................................................................................................................63
Calibrating the Seed Quantity ...................................................................................................63
Assem bly Inf ormation ............................................................................................................66
ISO Bus System ........................................................................................................................67
Raven Omniseed System .........................................................................................................68
Optional Equipment ..................................................................................................................69
Conveyor System (SW1000 shown) ......................................................................................69
Operation ...........................................................................................................................70
Filling Auger ..............................................................................................................................72
Operation ..............................................................................................................................73
Raven Omnex Electrical Information .....................................................................................75
Scale System ............................................................................................................................76
Operation ..............................................................................................................................76
Rear Torpedo Tow Hitch ...........................................................................................................77
Seed Wagon Owner’s Manual – Version 1.5 02/2016 5
www.horsch.com
Assembly & Specifications .....................................................................................................78
Schematics & Diagrams ........................................................................................................79
Service & Maintenance .............................................................................................................80
Lubrication .............................................................................................................................80
Grease ..................................................................................................................................81
Lubrication .........................................................................................................................81
Track Grease Points ..........................................................................................................83
Seed Wagon Grease Points (Conveyor Swing Arm) ..........................................................84
Conveyor G r ease Points ....................................................................................................84
Track Alignm ent ....................................................................................................................85
Track Tensioning & Detensioning..............................................................................................89
Tensioning .............................................................................................................................89
Detensioning .........................................................................................................................90
Tightening Hardware .............................................................................................................90
Bolt Tightening Torques – Metric Bolts ......................................................................................92
Bolt Tightening Torques – Imperial/Standard Bolts ...................................................................93
Metric Conversions Table .........................................................................................................94
Machine Storage .......................................................................................................................95
Maintenance .............................................................................................................................96
Hitch Adjustment & Maintenance ...........................................................................................97
Maintenance Schedule ..........................................................................................................99
Support .....................................................................................................................................99
Troubleshooting ...................................................................................................................... 100
Pneumatic Systems ............................................................................................................. 100
Seed Transfer ...................................................................................................................... 100
Metering System ................................................................................................................. 101
Faults & Remedies .................................................................................................................. 102
Notes: ..................................................................................................................................... 103
6 Seed Wagon Owner’s Manual – Version 1.5 02/2016
www.horsch.com
Seed Wagon Owner’s Manual – Version 1.5 02/2016 7
www.horsch.com
Introduction - Safety & Guidelines
Safety is YOUR responsibility!
READ AND UNDERSTAND THIS MANUAL BEFORE YOU OPERATE THIS MACHINE
Learn how to operate and service your machine correctly. Failure to do so could result in personal
injury and/or equipment and property damage. HORSCH will not accept any responsibility for any
damage or malfunctions resulting from failure to comply with the Operator’s Manual.
If the information found in this manual is not completely understood or if there are any questions,
contact HORSCH Customer Service.
HORSCH cares about y our safety! This machine is designed to prov ide maximum possible safety;
but no machine design can prevent operator error or carelessness.
The Owner’s Manual provides instructions for the safe operation and maintenance of this
machine.
Make sure the machine is in good operating condition.
Check service schedule in book.
This manual should be considered a permanent part of your machine and should remain with the
machine if you no longer own it. Right hand and left hand are determined by facing the direction
of forward travel respectively.
HORSCH reserves the right to alter illustrations as well as technical data and weights contained
in this manual at any time without notice.
This data is the property of HORSCH. All use and/or reproduction not specifically authorized by
HORSCH are prohibited.
All information, illustrations and specifications in this manual are based on the latest information
available at the time of publication. The right is reserved to make changes at any time without
notice.
Some illustrations may show optional equipment. Illustrations may show shields, guards, etc.,
opened or removed. All shields, guards, etc. must be in place during operation.
Machine Registration (Important Notice to Dealer/Owner!)
Please complete the Machine Registration Form on the next few pages and return to HORSCH
within 10 (ten) business days, from date of delivery to owner. Accurately record all the numbers
to help in tracing the machine. Your dealer needs these numbers when you order parts. NO
WARRANTY CLAIMS WILL BE ACCEPTED IF THIS MACHINE REGISTRATION IS NOT
RETURNED. T he warranty period begins on the date of delivery. See further noted information
in the Warranty Guidelines section on the following page.
8 Seed Wagon Owner’s Manual – Version 1.5 02/2016
www.horsch.com
Warranty Guidelines
1. The period of warranty for material defects relating to HORSCH products will be 12 months.
In the case of written deviations from the statutory provisions, these agreements shall apply.
They shall become effective upon delivery of the machine to the end customer, unless the
unit is stored during seasonal months, whereas the machine is not utilized. The machine will
then have a warranty start date when it is put in to service. During this waiver period the
machine is not to be used or show evidence of usage or the warranty date will be set back to
the original sold or delivery date. Registration must be completed within 10 days of machine
usage. Failure to comply may result in warranty start date reverting back to ori ginal purchase
or delivery date.
All wear item parts are excluded from the warranty.
2. Warranty claims must be submitted to the HORSCH Customer Service Department in
Mapleton, ND via your dealer. It is only possible to process claims which have been
completed correctly and submitted no later than four weeks after the damage occurred. No
warranty claims will be accepted to machines under the warranty waiver start date, except
any related Technical Service Bulletins.
3. In the case of deliveries made under the warranty which are subject to the return of the old
parts, the warranty claim, together with the old parts, must be returned to HORSCH within 4
weeks after the damage occurred.
4. In the case of deliveries made under the warranty, which are not subject to the return of the
old parts, these parts must be kept for the purpose of further decisions for a period of four
weeks after receipt of the warranty claim.
5. Warranty repairs to be carried out by outside companies, or repairs which are expected to
take more than 2 working hours, must be approved in advance with HORSCH Customer
Service Department.
200 Knutson St.
(701) 532-1000
service.us@horsch.com
For other related warranty items such as tire warranty issues, contact your nearest distributor.
A complete list of dealers can be found at the following web sites.
Firestone Tires - http://www.firestoneag.com/default-eng.aspx
Titan Tires - http://www.titan-intl.com/ or 1-800-USA-BEAR.
HORSCH, LLC
Mapleton, ND 58059 USA
Seed Wagon Owner’s Manual – Version 1.5 02/2016 9
or 1-800-435-4437.
www.horsch.com
10 Seed Wagon Owner’s Manual – Version 1.5 02/2016
www.horsch.com
Machine Registration Form: Customer’s Copy
NOTE: No Warranty Claims will be accepted if this Machine Registration Form is not returned!
To:
HORSCH, LLC
200 Knutson St. SE Tel: 701-532-1000 Email: service.us@horsch.com
Mapleton, ND 58059 Fax: 701-532-1101
Machine Product & Model: __________________________ New Machine Final Sale – Initial use
Customer’s Machine – Transfer
Serial Number: ___________________________________ Dem ons tr ation Mach ine – Initial use
Sold Date: _______________________________________
In Service Date: Est. Acres: ____________________
Operating Instructions:
I hereby confirm receipt of the Owner’s Manual and Parts Catalog for the above mentioned machine.
I have been instructed and informed by a HORSCH factory trained Service Technician / authorized Dealer
representative in the opera t ion and func tions of the m achine, as well as in the safety requirements.
________________________________________________
Name of the Service Technician / Dealer representative
Dealer Customer
Name: ______________________________ Name: _______________________________________
Address: ____________________________ Address: _____________________________________
City/State/Zip: ________________________ City/State/Zip: _________________________________
County: _____________________________ County: ______________________________________
Tel: ________________________________ Tel: _________________________________________
Fax: ________________________________ Fax: ________________________________________
E-mail: ______________________________ E-mail: ______________________________________
Customer No: _________________________ Customer No: _________________________________
I am aware that a W arr anty Claim will onl y be valid if , af ter the rec eipt of the m achin e, this form has been
fully completed, signed and returned to HORSCH, LLC.
______________________________________ ______________________________________
Place, Date Customer’s Signature
NOTE: After Signing, remove and/or copy this page. Keep signed delivery checklist in machine file at the dealership.
Seed Wagon Owner’s Manual – Version 1.5 02/2016 11
www.horsch.com
12 Seed Wagon Owner’s Manual – Version 1.5 02/2016
www.horsch.com
Machine Registration Form: Dealer’s Copy
NOTE: No Warranty Claims will be accepted if this Machine Registration Form is not returned!
To:
HORSCH, LLC
200 Knutson St. SE Tel: 701-532-1000 Email: service.us@horsch.com
Mapleton, ND 58059 Fax: 701-532-1101
Machine Product & Model: __________________________ New Machine Fina l Sa le – Initial use
Customer’s Machine – Transfer
Serial Number: ___________________________________ Dem ons tr ation Mach ine – Initial use
Sold Date: _______________________________________
In Service Date: Est. Acres: ____________________
Operating Instructions:
I hereby confirm receipt of the Owner’s Manual and Parts Catalog for the above mentioned machine.
I have been instructed and informed by a HORSCH factory trained Service Technician / authorized Dealer
representative in the opera t ion and func tions of the m achine, as well as in the safety requirements.
________________________________________________
Name of the Service Technician / Dealer representative
Dealer Customer
Name: ______________________________ Name: _______________________________________
Address: ____________________________ Address: _____________________________________
City/State/Zip: ________________________ City/State/Zip: _________________________________
County: _____________________________ County: ______________________________________
Tel: ________________________________ Tel: _________________________________________
Fax: ________________________________ Fax: ________________________________________
E-mail: ______________________________ E-mail: ______________________________________
Customer No: _________________________ Customer No: _________________________________
I am aware that a W arr anty Claim will onl y be valid if , af ter the rec eipt of the m achin e, this form has been
fully completed, signed and returned to HORSCH, LLC.
______________________________________ ______________________________________
Place, Date Customer’s Signature
NOTE: After Signing, remove and/or copy this page. Keep signed delivery checklist in machine file at the dealership.
Seed Wagon Owner’s Manual – Version 1.5 02/2016 13
www.horsch.com
14 Seed Wagon Owner’s Manual – Version 1.5 02/2016
www.horsch.com
Machine Registration Form: HORSCH’s Copy
NOTE: No Warranty Claims will be accepted if this Machine Registration Form is not returned!
To:
HORSCH, LLC
200 Knutson St. SE Tel: 701-532-1000 Email: service.us@horsch.com
Mapleton, ND 58059 Fax: 701-532-1101
Machine Product & Model: __________________________ New Machine Fina l Sa le – Initial use
Customer’s Machine – Transfer
Serial Number: ___________________________________ Dem ons tr ation Mach ine – Initial use
Sold Date: _______________________________________
In Service Date: Est. Acres: ____________________
Operating Instructions:
I hereby confirm receipt of the Owner’s Manual and Parts Catalog for the above mentioned machine.
I have been instructed and informed by a HORSCH factory trained Service Technician / authorized Dealer
representative in the opera t ion and func tions of the m achine, as well as in the safety requirements.
________________________________________________
Name of the Service Technician / Dealer representative
Dealer Customer
Name: ______________________________ Name: _______________________________________
Address: ____________________________ Address: _____________________________________
City/State/Zip: ________________________ City/State/Zip: _________________________________
County: _____________________________ County: ______________________________________
Tel: ________________________________ Tel: _________________________________________
Fax: ________________________________ Fax: ________________________________________
E-mail: ______________________________ E-mail: ______________________________________
Customer No: _________________________ Customer No: _________________________________
I am aware that a W arr anty Claim will onl y be valid if , af ter the rec eipt of the m achin e, this form has been
fully completed, signed and returned to HORSCH, LLC.
______________________________________ ______________________________________
Place, Date Customer’s Signature
NOTE: After Signing, remove and/or copy this page. Keep signed delivery checklist in machine file at the dealership.
Seed Wagon Owner’s Manual – Version 1.5 02/2016 15
www.horsch.com
16 Seed Wagon Owner’s Manual – Version 1.5 02/2016
www.horsch.com
Delivery Form: DEALERS’s Cop y
Serial Number: ……………………………………
At the time the machine is delivered, the following checklist is a reminder of informatio n
which should be conveyed directly to the customer. Check off each item as it is fully
explained to customer.
[ ] Make the customer aware of all safety precautions that must be exercised while using this
machine. Point out all Warning and Caution safety labels/decals on the machine.
[ ] Point out the location of the Serial Number Tag (product identification numbers), for future
reference of the machine.
[ ] Give the Owner’s Manual to the customer. Encourage customer to read the manual in its
entirety.
[ ] Explain all operating adjustments.
[ ] Review recommended procedures for attaching and detaching machine from tractor.
[ ] Make the customer aware of all safety precautions that must be observed when
transporting the machine in field and on public roads.
[ ] When the machine is transported on a road or highway at night, or during the day,
accessory lighting and devices should be used for ade quate w arning to operators of other
vehicles. In this regard, tell the c ustomer to check local governmental regulations. The
machine should be equipped with road lighting and slow moving vehicle sign.
[ ] Explain to the customer that the life expectancy of this or any other machine depends on
regular lubrication as directed in the Owner’s Manual. Follow all maintenance and
lubrication schedules for the machine.
[ ] Discuss with the customer the use of proper tools and equipment for service of the
machine.
[ ] Have customer record Serial Number(s) in the Product Specification section.
[ ] To the best o f my knowledge, this machine has been delivered ready for field use and the
customer has been fully informed as to proper operation and care.
Signed: ................................................................................. (Customer)
Signed: ................................................................................. (Dealer Representative)
Date: .....................................................................................
Seed Wagon Owner’s Manual – Version 1.5 02/2016 17
www.horsch.com
18 Seed Wagon Owner’s Manual – Version 1.5 02/2016
www.horsch.com
Product Specification
Each machine manufactured and assembled is serialized and provided a number for tracking
purposes. There is a model number, which is the category for pr oduct famil y of the machine, and
there is a serial number.
The serial number may also be known as, or part of, a Product Identification Number. This
number is a formulated number which details the machines build information for tracking purposes
and easy identification later during time of service, maintenance and replacement part ordering.
The Serial number, along with Model number of the machine, can be found on the Serial Number
Tag.
HORSCH, LLC has placed a Serial Number Tag (reference picture below) on the machine with
the above mentioned information. It is located on the main frame cross member tube directly
behind the front hitch, just off center towards the left hand side of each machine.
Record the Model and Serial number of the machine below. Retain this page for customer use
only! For future reference, the information will be used whenever the machine is being serviced,
for ordering replacement parts or when requesting information for the machine such as
replacement Owner’s Manual or a Parts Catalog. Be sure to provide both, the model number and
serial number, when contacting your dealer, for better assistance and quicker support of your
machine.
Date of Purchase: __________________________
Dealer Information:
Name: _______________________________
Address: _____________________________
Phone: _______________________________
Seed Wagon Owner’s Manual – Version 1.5 02/2016 19
HORSCH, LLC
Serial Number Tag
www.horsch.com
In These Operating Instructions
The operating instructions distinguish between three different types of warning and safety
instructions. The following graphic symbols are used:
Important instructions!
If there is a risk of injury!
If there is a risk to life and limb!
It is important that a ll the safet y instructions c ontained in thes e operating instructions and all the warning
signs on the machine are read thoroughly and understood prior to operation of the machine.
Ensure that the warning signs are legible and replace any signs that are missing or damaged.
These instructions m ust be f ollowed in order to pr even t acc idents. I nform other us ers of the warnings and
safety instructions and the location of this Owner’s Operators Manual.
Do not carry out any operations which may affect the safe use of the machine.
Authorized Oper ators
Only those persons who have b een authori zed and in structed b y the operator may operate the machine.
Operators must be at least 16 years of age.
The operator must hold a valid driving license. They are responsible for third parties in the operating area.
The person in charge must:
Make the operating instructions available to the operator.
•
Ensure that the operator has read and understood the operating instructions.
•
The operating instructions are a key component of the machine.
Protective Clothing
For operation and maintenance of this machine, you will need:
Snug fitting clothing; no loose articles or strings.
•
Safety gloves and goggles to protect against dirt and sharp edged machine parts.
•
20 Seed Wagon Owner’s Manual – Version 1.5 02/2016
www.horsch.com
Information Regarding Safety
The following warnings and safety instructions apply to all sections in these operating instructions.
All users must follow recommended precautions and safe operating practices.
Recognize Safety Information
Understand Safety Symbols
Seed Wagon Owner’s Manual – Version 1.5 02/2016 21
www.horsch.com
Safety Symbols on the Machine:
Read and adhere to the operating instructions before starting up the
machine!
Stay clear of swinging area of retractable and extendible machine parts!
Switch the engine off and pull out the key before starting maintenance and
repair work!
Never reach into areas where there is a risk of crushing, as long as parts
could still be moving!
Watch out for fluids spraying out under high pressure, follow the operating
instructions!
It is only permitted to remain in the danger zone if the safety support is in
place!
When hitching up the machine and when operating the hydraulic system,
no persons should be between the machines!
No passengers are allowed to ride on the machine!
Do not climb on rotatable parts. Use mounting steps provided for this
purpose!
Lifting hook; attach lifting tackle (chains, ropes, etc.) here when performing
loading work!
22 Seed Wagon Owner’s Manual – Version 1.5 02/2016
www.horsch.com
Follow Safety Instructions
Carefully read all safety messages in this manual and on the machine safety decals. Keep safety
decals in good condition. Replace missing or damaged safety decals. Be sure new equipment
components and repairs parts include the current safety decals.
Learn how to operate the machine and how to use controls properly. Do not let anyone operate
without instruction.
Keep the machine in proper working condition.
Unauthorized modifications to the machine may impair the function and/or safety and affect the
machine life and thus void the Warranty.
Operate Safely
Do not make field adjustments while machine is in motion.
Do not enter tank unless another person is present and hydraulic hoses are disconnected from
the tractor.
Operate machine from the tractor seat only.
Keep hands and fingers away from hinge areas when positioning auger. Lock auger in storage
position before operating in the field.
Clear area around machine before raising or lowering machine conveyor/auger system.
Stop tractor on level ground when raising or lowering machine conveyor/auger system.
Seed Wagon Owner’s Manual – Version 1.5 02/2016 23
www.horsch.com
Do not operate with conveyor/auger in raised position. To improve stability, travel through the field
with the conveyor/auger in its home position. Return to home transport position and install
transport pins just before leaving the field and entering a roadway.
Do not operate close to the edge of a ditch, creak, gully or steep embankment.
Avoid holes, ditches and obstructions which may cause tractor, seed wagon, or seeding to ol to
roll over, especially on hillsides.
Avoid sharp turn on hillsides.
Slow down when turning or traveling over rough ground, and when turning on inclines.
Shut off tractor and shift in to ‘Park’ or set brakes when leaving tractor. Remove key when leaving
tractor unattended.
Stay Clear of Air Hoses
Stay clear of hoses when fan is running. Seed or fertilizer blowing out at high speed can cause
eye and other personal injuries. Never attempt to clear blockage from air hoses or seeding tool
boots while fan is running.
Use a Signal Person
Use a signal person to direct movement of the tractor/seed wagon/seeding tool combination
whenever the tractor operator’s view is obstructed.
Designate one individual as the Signal Person. Always have the signal person stand in clear
view. Be sure signal person stays a safe distance away from the machine when it is moving.
24 Seed Wagon Owner’s Manual – Version 1.5 02/2016
www.horsch.com
Prior to starting the tractor, discuss hand signals and what each signal means to avoid
misunderstandings and confusion which could result in a serious injury or fatal accident for
someone.
Keep all bystanders away whenever the machine is in motion.
Do not stand between seed wagon and implement while machine is in motion.
Wear Protective Clothing
Wear c lose fitt ing clothing and safety equipment appropriate to the job. Operating equipment
safely requires the full attention of the operator. Do not wear radio or music headphones while
operating machine.
Keep Shields in Place
Do not operate seed wagon without safety shields in place.
Rotating parts can crush or dismember, causing a fatal accident or personal injury.
To avoid serious injury or fatal accident from entanglement, do not allow person(s) or clothing to
be near auger when it is in motion.
Keep auger hopper screen in place at all times.
Shut off tractor and disconnect hydraulic hoses before removing shields for adjustment or service.
Seed Wagon Owner’s Manual – Version 1.5 02/2016 25
www.horsch.com
Use a Safety Chain
A safety chain will help control drawn equipment should it accidentally separate from the draw bar
of the tractor. A safety chain of the proper stren gth rating is provided with the machine as standard
equipment.
Using the appropriate adapter parts, attach the chain to the tractor drawbar support or other
specified anchor location. Provide only enough slack in the chain to permit turning.
Transport Safety
DO NOT EXCEED A M AXIMUM TRANSPORTATION SPEED OF 20 MPH (32
KPH) DURING TRANSPORTATION. LOSS OF VEHICLE/MACHINE CONTROL CAN
RESULT IN SERIOUS PERSONAL INJURY OR DEATH!
Front Hitch decal
Keep away from overhead power lines. Serious injury or fatal accident may occur. Proceed
cautiously under overhead power lines and around utility poles. Know the transport height of your
machine.
Do not position conveyor when near electric power lines.
Electrocution can occur without direct contact with overhead electric power lines.
Do not transport with an underweight tractor.
Prevent collisions between motorist and slow moving equipment on public roads. Frequently
check for traffic from the rear, especially in turns, and use the turn signals where necessary.
Always use the flashing warning lights, day and night, when transporting on public roads. Keep
reflective material and SMV (Slow Moving Vehicle) sign clean and visible.
Passengers on the machine are strictly forbidden.
26 Seed Wagon Owner’s Manual – Version 1.5 02/2016
www.horsch.com
Danger Zone
Only enter the Danger Zone when the lifting cylinder depth stops are inserted.
Handle Pesticides and Fertilizers Carefully
Chemicals may cause eye, skin or breathing problems. Wear face mask, or breathing apparatus,
gloves and goggles.
Keep dust away from skin and hair.
Keep containers low when pouring. Let the wind blow the fumes and dust AWAY fr om yo u and
other bystanders when mixing with seed or when filling the tank.
Wear a filtered respirator if you cannot avoid dust.
Wear goggles to protect your eyes.
Wash exposed skin areas frequently. Do not leave pesticide on your skin!
Do not smoke while handling pesticides.
Properly dispose of pesticide containers, unused pesticides and left over treated seed and
fertilizer.
Read and observe manufacturers recommendations.
Store pesticides in original containers with clearly visible and intact labels. Store in a separate,
plainly marked locked building.
Seed Wagon Owner’s Manual – Version 1.5 02/2016 27
www.horsch.com
Use Handrails and Steps
Falling is a major cause of personal injury.
When you get on and off machine, always maintain a three-point contact with steps and handrails
and face the machine. Do not use any controls as handrails or supports.
Never jump on or off the machine. Never mount or dismount a moving machine.
Do not ride on the machine. Do not stand on the tanks or catwalk.
Keep Riders off Machines
Keep riders off the machine at all times when in operation and in motion.
Riders are subject to injury, such as being struck by foreign objects and being thrown off the
machine.
Riders also obstruct the operator’s view, resulting in the machine being operated in an unsafe
manner.
Passengers on the machine are strictly forbidden.
Use Safety Light and Devices
28 Seed Wagon Owner’s Manual – Version 1.5 02/2016
www.horsch.com
Prevent collisions between other road users, slow moving tractors with attachments or towed
equipment, and self-propelled machines on public roads. Frequently check for traffic from the
rear, especially in turns, use turn signals where necessary.
Use headlight, flashing warning lights, and turn signals day and night. Follow local regulations
for equipment lighting and marking. Keep lighting and ma rking vi sible and in good working order.
Replace or repair lighting and marking that has been damaged or lost.
Transport Safel y
Always travel at a reasonable and safe speed. Never exceed 16 mph.
Never transport with any tank more than half full. If tanks are full travel speed should not exceed
10 mph.
Never transport with fan running.
Keep hands and fingers away from hinged areas when positioning auger. Always lock auger in
storage position.
Shift the tractor in to a lower range or gear when transporting down steep slopes or hills. Latch
the tractor left and right brakes together so when in use the tractor brakes evenly. Stop slowly.
Avoid loss of control due to decreased braking ability when transporting down sloped roadways,
wet or muddy roadways or roadways covered with loose gravel or sand.
Avoid steep slopes. Some slopes may exceed tractor braking capability.
Transport only with a properly sized tractor.
Refer to ‘Calculating Minimum Tractor Weight for Safe Transport’ before transporting down a hill.
Shift tractor to a lower gear and travel at a reduced speed. Reducing the speed maximizes
stability and control and the tractors braking capability.
Use engine braking to reduce speed if available.
Avoid sharp turns or rapid steering corrections on slopes.
Seed Wagon Owner’s Manual – Version 1.5 02/2016 29
www.horsch.com
Stopping distance increases with speed and weight of towed loads, and on slopes. Towed loads
with or without brakes that are too heavy for the tractor or are towed too fast can cause loss of
control. Consider the total weight of the equipment and its load.
Observe these recommended maximum road speeds, or local speed limits which may be lower:
• Do not tow this implement faster than 20 Mph (32 Km/h)
• Never transport seed wagon when loaded on roadways
• Never tow this implement over 10 mph when fully loaded
Ensure the load does not exceed the recommended weight ratio. Add ballast to recommended
maximum for tractor, lighten the load, or get a heavier towing unit. The tractor must be heavy and
powerful enough wit h adequate braking power for the towed load. Use additional caution when
towing loads under adverse surface conditions, when turning, and on inclines.
Practice Safe Maintenance
Understand service procedures before doing work to the machine. Keep area clean and dry.
Never lubricate, service, or adjust machine while it is moving. Keep hands, feet and clothing aw ay
from power driven parts. Disengage all power and operate controls to relieve pressure. Lower
equipment to the ground. Stop the engine. Remove the key. Allow machine to cool.
Securely support any machine elements that must be raised for service work and install any
blocks or stops where needed.
Keep all parts in good operating condition and properly installed. Fix dama ged areas immediately.
Replace worn or broken items with OEM replacement parts from your authorized dealer. Remove
any buildup of grease, oil and dirt and other debris.
Disconnect wiring harnesses and cables from the tractor plugs before making adjustments on
electrical system components or welding on a machine.
When welding near an electronic control module or component, such as a monitor controller,
unplug all connections and remove controller from the machine to prevent damage to the
microprocessors.
30 Seed Wagon Owner’s Manual – Version 1.5 02/2016
Loading...