Horn Tools Log Splitter User Manual
Manual
LOG SPLITTER
SPARE PARTS LIST
Item ID No. Description Quantity Item ID No. Description Quantity
1 1167101 Log support 2 1 39 1167139 Bolt M10 x 30 4
2 1167102 Circulate stem 2 40 1167140 Double Steel Wire Hoop 15-26 4
3 1167103 Screw M6 x 20 4 41 1167141 Epispastic’s Oil Pipe 1
4 1167104 Washer 6 17 42 1167142 Pump Oil Ingoing Spigot 1
5 1167105 Armguard Enclose 2 43 1167143 Gear pump 1
6 1167106 Armguard Cover, Ø 22 2 44 1167144 Spring Washer 8 6
7 1167107 Manipulative Armguard 2 45 1167145 Inner Hexangular Screw M8 x 35 4
8 1167108 Right Armguard Hold assembly 1 46 1167146 Annular High Pressure oil pipe 3 1
9 1167109 Locknut M6 5 47 1167147 Valve Pipe Oil Spigot 2
10 1167110 Star Model Armguard 2 48 1167148 Valve Oil Out Spigot 1
11 1167111 Clamp Timber Claw 2
12 1167112 Left Armguard Hold Assembly 2 50 1167150 CA Valve 1
13 1167113 Armguard Handle Pin 2 51 1167151 Washer groupware 20 6
14 1167114 Thin Nut M8 2 52 1167152 Valve Stem 1
15 1167115 Washer 8 10 53 1167153 Subulate three Passage 1
16 1167116 Bolt M8 x 45 2 54 1167154 Annular High Pressure oil pipe 1 1
17 1167117 Adjustable Lever 1 55 1167155 Annular High Pressure oil pipe 2 1
18 1167118 Clip, Ø 3 2 56 1167156 Three Passage Nut Cap 1
19 1167119 Locknut M8 4 57 1167157 Bolt M8 x 25 2
20 1167120 Clamp Timber Claw 1 1 58 1167158 Bolt M6 x 30 1
21 1167121 Four Star Armguard 1 59 1167159 Pump Jacket 1
22 1167122 Quadrade Cover 1 60 1167160 Wheel 2
23 1167123 Nut Cap M8 1 61 1167161 Snap Washer - Shaft, Ø 16 2
24 1167124 Tense Pole 1 62 1167162 Screw M6 x 16 4
25 1167125 Short Axis d 1 63 1167163 Locknut M10 10
26 1167126 Snap washer - shaft, Ø 22 4 64 1167164 Oleaginous Cover 1
27 1167127 Above Slip Plank 1 1 65 1167165 Lock Handle 6
28 1167128 Above Slip Plank 4 1 66 1167166 O- Ring 32 x 3,55 1
29 1167129 Inner Hexangular Screw M6 x 16 2 67 1167167 Bolt M10 x 35 6
30 1167130 Locknut M4 2 68 1167168 Wheel Cover 2
31 1167131 Above Slip Plank 2 1 69 1167169 Bolt M16 x 25 1
32 1167132 Above Slip Plank 3 1 70 1167170 Washer Groupware 16 1
33 1167133 Inner Hexangular Screw M6 x 10 2 71 1167171 Machine Shelf 1
34 1167134 Armguard Hold Limitative Plank 2 72 1167172 Nether Axis 1
35 1167135 Thin Nut M16 1 73 1167173 C3 Oily Vat 1
36 1167136 Screw M4 x 6 2 74 1167174 Slip Plank 4
37 1167137 Motor 1 75 1167175 Knife Rest Pipe 1
38 1167138 Washer 10 32
2 15
1
1.1
2 3
4 5
6 7
CONTENTS
Explanation of the Warning Symbols.................................................................................................................. Page 5
General Safety Instructions.................................................................................................................................. Page 6
Electrical Safety.................................................................................................................................................... Page 7
Assembly and Package Contents........................................................................................................................ Page 8
Assembly and Preparation................................................................................................................................... Page 8
Startup / Application
............................................................................................................................................. Page 9
Maintenance and Care.......................................................................................................................................... Page 11
Environment, Recycling and Disposal................................................................................................................ Page 12
Spare Parts and Parts Subject to Wear
............................................................................................................... Page 12
Specifications
........................................................................................................................................................ Page 13
Troubleshooting and Fault Clearance
................................................................................................................. Page 13
Exploded View....................................................................................................................................................... Page 14
Spare Parts List..................................................................................................................................................... Page 15
SPECIFICATIONS
Motor 400V~ 50Hz 3500W IP54
Splitting capacity
Hydraulic oil volume 6 litres
Splitting blade stroke 480 mm
Forward speed 5.4 cm / sec
Reverse speed 11.7 cm / sec
Noise level 80.1 dB(A) idling; 92.5 dB(A) under load
Dimensions
Weight 115 kg
TROUBLESHOOTING AND FAULT CLEARANCE
Problem Possible Cause Remedy
1. Motor does not start.
2. Wrong motor direction 2.1 Wrong polarity.
3.
Splitter not moving alt-
hough motor is running
4.
Splitter working, however,
with untypical noise and
vibration.
4 13
EXPLANATION OF THE WARNING SYMBOLS
This User‘s Guide describes safety symbols as well as internationally used symbols and pictograms placed on this machine.
Prior to using this machine, you must have read all safety warnings. Improper usage of this log splitter may cause injuries as a result of
fire or electric shock, or entail cutting injuries and damage to property.
Keep this User‘s Guide in a safe place.
WARNING: Read the
safety warnings and operating
instructions given in this User‘s
Guide and keep the latter in a
safe place for later reference.
Wear solid footwear to
protect your feet from falling
logs
Wear safety gloves to protect
your hands from wood chips
and splinters
Wear safety goggles or a
visor to protect your eyes
from wood chips and splinters
coming off.
Do not allow any persons
to stay within your working area.
Any persons or animals around
must be at least 5 m away from
this machine.
Waste oil must be disposed of
in accordance with the locally
applicable laws and must never
flow into the environment.
CAUTION: There is a hazard
of cutting or crushing injuries.
Keep your hands off the splitting
blade when the latter is moving.
WARNING: Closely watch
the direction of the log pusher.
WARNING: Never use
your hands to remove a
log jammed on the splitting
blade.
Use a suitable tool to do so.
WARNING: Pull the mains
plug before doing any cleaning
and maintenance work.
Never remove any guards
and safety devices
WARNING: Do not use
this wood splitter in the rain.
Also avoid use under wet conditions.
Loading...