Hornady Case Tumbler User Manual

Case Tumbler

PRODUCT INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS

Read all instructions

Reloading is an enjoyable and rewarding experience. This case tumbler will add to the
quality of your reloaded ammunition. It has been designed from the beginning with the
user’s safety in mind.

As with any mechanical device, safety rules must be followed. By observing these rules,
the chance of a hazardous occurrence becomes extremely remote.

GENERAL

Use the equipment as the manufacturer recommends.•
Study the instructions carefully and become thoroughly familiar with the operation •

of the tool. Don’t take short cuts.
Observe “good housekeeping” in the reloading area.•
Keep tools and components neat, clean and orderly.•
Wear adequate eye protection.•

WARNINGS

Read this instruction manual thoroughly before attempting to operate this product.•
Do not use any chemicals other than those specifically recommended by the •

manufacturer for cartridge case cleaning.
Do not attempt to salvage badly corroded cases which might be structurally weak.•
Do not attempt to clean loaded ammunition under any circumstances.•

ELECTRICAL

The 110VAC unit is equipped with a three prong grounded cord. The 220VAC unit is •
equipped with a European two prong round cord. Plug only into a proper outlet.

Do not work on wet floors.•
Do not plug into electrical outlet until the proper voltage is supplied.•
Keep all electric cords away from moisture, rain and moving parts.•
Periodically check all cords for worn/frayed spots and replace or repair to code if needed.•

OPERATOR

Wear clothing that is not loose. Loose clothing can be drawn into machinery.•
Keep your hands and fingers away from “danger” spots where they might be injured.•
Keep children and visitors away from machinery.•
Take off loose jewelry before using machines. Be sure that all moving parts are •

shielded and all guards are in place before operating any equipment.

RECORD KEEPING

Keep complete records of reloads. Apply a descriptive label to each box showing the
date produced and the primer, powder and bullet used. Labels for this purpose are
packaged with Hornady bullets.

Since Hornady has no control over the choice of components, the manner in which
they are assembled, the use of the product, or the firearms in which the resulting
ammunition may be used, no responsibility, either expressed or implied is assumed for
the use of ammunition reloaded with this product.

SAVE THESE INSTRUCTIONS

INTRODUCTION

The Hornady Case Tumbler has been designed specifically for cleaning and polishing a
large quantity of cartridge cases quickly and efficiently. Features of the case tumbler
include a full 3-1/2 quart working capacity, 3/16" bowl thickness, wide, stable base and
a quiet fan-cooled, sealed ball-bearing motor. This case tumbler is shipped completely
assembled and by following these instructions, should provide safe, maintenance-free
operation.

UNPACKING

Unpack the case tumbler and take a few minutes to review these instructions and
familiarize yourself with the various parts of the cleaner.