Horn A08 Service Manual
www.horngmbh.com
The special chain guard
catena
A08
catena A08 - Through an elegant design and smart technology high-quality aluminium is made to form a special
product. The catena A08 model can be used for chain wheels with up to 48 teeth (1-3 x). The chain guard
also has adjustable length adjustment developed by Horn, and is therefore flexible and easy to assemble.
The attachment gland is identical with the gland used in catena 05. The derailleur area is covered by a
plastic trim, so that both clothing and the chain mechanics are protected.
The design of the surface allows the cycle
owner’s fantasy to run wild. As standard,
the aluminium profile in polished with a
brilliant finish. The length adapter and the
trim are made from a transparent-smoke
grey plastic. Depending on the design of
the bike, the chain guard can also be
painted in colour of the frame according
to the customer’s requirements.
Suitable for drives:
46 - 48 teeth / 1-3 x
Mounting:
2 - point attachment (B0548)
Material:
Aluminium /ABS
Horn GmbH Gewerbestraße 14 78244 Gottmadingen Phone + 49 (7731) 7803 - 60 Fax + 49 (7731) 7803- 91 E-mail: fahrrad@horngmbh.com www.horngmbh.com
© www.marsrot.com
ORDERING DATA
TYPE catena A08 Abbreviation Article No.
Polished aluminum / trim and length adapter transparent ApBLt 104932
Polished aluminum / trim and length adapter black ApBLs 104933
Black anodized aluminum / trim and length adapter transparent AsBLt 104934
Aluminium (untreated) / trim and length adapter transparent ArBLt 104935
Polished aluminum / length adapter transparent (without trim) ApLt 104936
MOUNTING
2 - point attachment steel, black, powder-coated B0548 101-006-000A-UO
Assembly takes place using the 2-point attachment B0548.
The chain guard can be assembled with or without the trim.
catena
A08
Technical Data
Loading...