Horizon Hobby SPMSR4000T Users manual
SR4000T/SR6000T
Telemetry Receiver Instruction Manual
Telemetrie Empfänger
Récepteur avec télémétrie intégrée
Ricevente con Telemetria
EN
NOTICE
All instructions, warranties and other collateral documents are subject to
change at the sole discretion of Horizon Hobby, LLC. For up-to-date product
literature, visit horizonhobby.com and click on the support tab for this
product.
Meaning of Special Language
The following terms are used throughout the product literature to indicate
various levels of potential harm when operating this product:
NOTICE: Procedures, which if not properly followed, create a possibility
of physical property damage AND a little or no possibility of injury.
CAUTION: Procedures, which if not properly followed, create the probability
of physical property damage AND a possibility of serious injury.
WARNING: Procedures, which if not properly followed, create the probability
of property damage, collateral damage, and serious injury OR create a high
probability of superficial injury.
Age Recommendation: Not for children under 14 years. This is not a toy.
WARNING: Read the ENTIRE instruction manual to become familiar
with the features of the product before operating. Failure to operate the
product correctly can result in damage to the product, personal property and
cause serious injury.
This is a sophisticated hobby product. It must be operated with caution and
common sense and requires some basic mechanical ability. Failure to operate this Product in a safe and responsible manner could result in injury or
damage to the product or other property. This product is not intended for use
by children without direct adult supervision. Do not attempt disassembly, use
with Incompatible components or augment product in any way without the
approval of Horizon Hobby, LLC. This manual contains instructions for safety,
operation and maintenance. It is essential to read and follow all the instructions and warnings in the manual, prior to assembly, setup or use, in order to
operate correctly and avoid damage or serious injury.
WARNING AGAINST COUNTERFEIT PRODUCTS
Always purchase from a Horizon Hobby, LLC authorized dealer to ensure
authentic high-quality Spektrum product. Horizon Hobby, LLC disclaims
all support and warranty with regards, but not limited to, compatibility and
performance of counterfeit products or products claiming compatibility with
DSM or Spektrum technology.
NOTICE: This product is only intended for use with unmanned, hobby-grade,
remote-controlled vehicles and aircraft. Horizon Hobby disclaims all liability
outside of the intended purpose and will not provide warranty service related
thereto.
WARRANTY REGISTRATION
Visit www.community.spektrumrc.com today to register your product.
Water-Resistant Component
Your new Horizon Hobby SR4000T/SR6000T Telemetry Receiver has a special
water-resistant coating on the electronics to ensure reliable performance in
higher than average moisture conditions. This conformal coating can offer mild
protection from light drops of water.
• DO NOT submerge this product under water for any period of time. If it is
submerged, it may result in damage or loss of function.
• DO NOT pour water onto or allow excess water to come in direct contact
with the product.
• DO NOT operate this product in heavy rain or snow.
• DO NOT expose this product to salt water (ocean water or water on salt-
covered roads), contaminated or polluted water.
In case of excess exposure to water or debris, immediately wipe down the
SR4000T/SR6000T with a soft cloth, and allow it to fully dry before next use.
NOTICE: Never use a pressure washer to clean your vehicle.
NOTICE: Make sure the other components in your vehicle are waterproof or
water-resistant before driving in wet conditions.
SR4000T/SR6000T Telemetry Receiver
The Spektrum™ SR4000T/SR6000T Telemetry Receiver is compatible with all
Spektrum DSMR
transmitter capable of telemetry.
Specifications
Type: DSMR with internal telemetry
Dimensions (LxWxH): 1.5 x 1.1 x 0.6 in (37.5 x 27.7 x 15.7mm)
Antenna Length: 8.27 in (210mm)
Channels: 4 (SR4000T): 6 (SR6000T)
Weight: 0.3 oz (9.2 g)
Band: 2.4GHz
Voltage Range: 3.5–9.6V
®
surface transmitters. Telemetry functions require a Spektrum
EN
A: Voltage sensor port
B: Temperature sensor port
C: Bind Button
D: Antenna
E: RPM sensor port
F: XBUS Port
G: Servo ports-
•Bind/Battery
•Steering
•Throttle
•Aux1-Aux4
(SR4000T: Aux1, Aux2)
G
A
B
C
D
E
F
EN
Receiver Installation and Setup
Install the Receiver in your vehicle using double-sided foam servo tape. Foam
servo tape will hold the receiver in place and help isolate it from vibrations.
Mount the antenna up and away from the vehicle. The higher up the antenna
is, the better signal it will receive.
NOTICE: Do not cut or modify the antenna.
Powering the receiver with a separate receiver pack
Receiver
Powering the receiver with an ESC
Battery To Motor
Electronic
Receiver
Speed Control
Throttle Servo
Steering Servo
Battery
Steering Servo
Failsafe
Failsafe position is set during binding. In the unlikely event that the radio link
is lost during use, the receiver will drive all channels to its pre-programmed
failsafe position (normally neutral or full brakes). If the receiver is powered on
prior to turning on the transmitter, the receiver will enter the failsafe mode,
driving the throttle channel to its preset failsafe position. When the transmitter
is turned on, normal control is resumed.
IMPORTANT: Failsafe activates only in the event that signal is lost from the
transmitter. Failsafe will NOT activate in the event that receiver battery power
decreases below the recommended minimums or power to the receiver is lost.
Binding Receiver to Transmitter
In order to operate, the receiver must be bound to the transmitter. Binding
is the process of programming the receiver to recognize the GUID (Globally
Unique Identifier) code of a single specific transmitter. When areceiver is
bound to atransmitter/model memory, the receiver will only respond to that
specific transmitter/model memory.
Binding
1. Push and hold the bind button on the receiver while powering up the
receiver. The orange LED will flash continuously, indicating that the receiver
is in bind mode.
Tip: It is possible to use a bind blug in the BIND/BATT port if desired.
2. With all channels in the desired preset failsafe position (normally neutral),
put your transmitter in bind mode. Continue holding the failsafe position until
the binding process is complete.
3. The bind process is complete when the orange LED on the receiver is solid.
CAUTION: When the bind process is complete, the throttle and
steering channels are active. Keep hands and loose objects away from
all spinning parts on the vehicle.
You must rebind the transmitter and receiver if you:
• changetheservoreverseafterbinding.
• wanttousethereceiverwithadifferentmodelmemory.
• areusingthereceiverwithaDSMRtransmitterandyouchangetheframe
rate in the transmitter.
• areusingthereceiverin5.5msandwanttelemetry,youmustrebindin11ms.
EN
Aux channels
The Aux channels can operate as extra servo channels, or as a power supply
for a personal transponder.
• If 5.5ms frame rate is selected in the transmitter, only two channels,
Steering and Throttle, are operational. The Aux channels can be used to
power a personal transponder or lights.
• If a frame rate other than 5.5ms is selected, the Aux channels will
operate as extra servo channels.
IMPORTANT: When using the receiver with a DSMR transmitter, you must
re-bind any time you change the frame rate in the transmitter.
NOTICE: The DX4R Pro or DX6R are required for 5.5ms frame rate.
EN
Telemetry
The Spektrum SR4000T/SR6000T Telemetry Receiver features 4 integrated
telemetry ports that are compatible with Spektrum telemetry capable
transmitters.
The Telemetry ports include:
• Voltage
• Temperature
• RPM
• XBus Port (Connect additonal telemetry sensors)
The Spektrum SR4000T/SR6000T Telemetry Receiver has the Voltage Sensor
and the Temperature Sensors included in the box.
Voltage Sensor
• Plug the voltage sensor (SPMA9570) into the VOLT port on the
SR4000T/SR6000T.
• Attach the stripped end of the wire to the -Negative (Black) wire of
the voltage source. Typically, you would solder the wire to the battery
connector.
Temperature Sensor
• Plug the Temperature sensor (SPMA9571) into the TEMP port on the
SR4000T/SR6000T.
• Loop the wire around the head of a nitro/gas engine, snugging the
plastic sleeve to secure the wire. The mounting position on nitro/gas
engines will result in different temperature readings. Experiment with
different posistions on the engine head for best results.
• Loop the wire around a battery pack or electric motor and secure in
place with tape.
For information on installing other Spektrum Telemetry Sensors visit
http://www.spektrumrc.com
2.4GHz Troubleshooting Guide
Problem Possible Cause Solution
The system will
not connect
The receiver
goes into failsafe
mode a short
distance away
from the transmitter
The receiver
stops responding
during operation
Your transmitter and receiver are too close together
You are near metal objects Move to an area with less
The receiver is bound to a
different model memory
Your transmitter was
placed into bind mode and
is no longer bound to your
receiver
Check for damage on the
receiver antenna
Low receiver battery voltage
If the battery voltage is low,
it may drop below 3.5V
momentarily, causing the
receiver to brown-out, then
reconnect
Move transmitter 8 to 12
feet away from receiver
metal
Make sure the correct model
memory is active in your
transmitter
Rebind your transmitter
and receiver
Make sure your receiver antenna is in an antenna tube
and is above the vehicle
Replace the receiver or
contact Horizon Product
Support
Charge the receiver or
vehicle battery. Spektrum
receivers require at least
3.5V to operate
EN
Loose or damaged wires
or connectors between
battery and receiver
Check the wires and
connection between the
battery and receiver. Repair
or replace wires and/or
connectors
EN
1-Year Limited Warranty
What this Warranty Covers - Horizon Hobby, LLC, (Horizon) warrants to the
original purchaser that the product purchased (the “Product”) will be free from
defects in materials and workmanship for a period of 1 year from the date of
purchase.
What is Not Covered
This warranty is not transferable and does not cover (i) cosmetic damage, (ii)
damage due to acts of God, accident, misuse, abuse, negligence, commercial
use, or due to improper use, installation, operation or maintenance, (iii)
modification of or to any part of the Product, (iv) attempted service by anyone
other than a Horizon Hobby authorized service center, (v) Product not purchased
from an authorized Horizon dealer, (vi) Product not compliant with applicable
technical regulations, or (vii) use that violates any applicable laws, rules, or
regulations.
OTHER THAN THE EXPRESS WARRANTY ABOVE, HORIZON MAKES NO OTHER
WARRANTY OR REPRESENTATION, AND HEREBY DISCLAIMS ANY AND ALL
IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE. THE PURCHASER ACKNOWLEDGES THAT THEY
ALONE HAVE DETERMINED THAT THE PRODUCT WILL SUITABLY MEET THE
REQUIREMENTS OF THE PURCHASER’S INTENDED USE.
Purchaser’s Remedy
Horizon’s sole obligation and purchaser’s sole and exclusive remedy shall be that
Horizon will, at its option, either (i) service, or (ii) replace, any Product determined
by Horizon to be defective. Horizon reserves the right to inspect any and all
Product(s) involved in a warranty claim. Service or replacement decisions are
at the sole discretion of Horizon. Proof of purchase is required for all warranty
claims. SERVICE OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS
THE PURCHASER’S SOLE AND EXCLUSIVE REMEDY.
Limitation of Liability
HORIZON SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL
OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR
COMMERCIAL LOSS IN ANY WAY, REGARDLESS OF WHETHER SUCH CLAIM IS
BASED IN CONTRACT, WARRANTY, TORT, NEGLIGENCE, STRICT LIABILITY OR
ANY OTHER THEORY OF LIABILITY, EVEN IF HORIZON HAS BEEN ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES. Further, in no event shall the liability of
Horizon exceed the individual price of the Product on which liability is asserted.
As Horizon has no control over use, setup, final assembly, modification or misuse,
no liability shall be assumed nor accepted for any resulting damage or injury. By
the act of use, setup or assembly, the user accepts all resulting liability. If you
as the purchaser or user are not prepared to accept the liability associated with
the use of the Product, purchaser is advised to return the Product immediately
in new and unused condition to the place of purchase.
Law
These terms are governed by Illinois law (without regard to conflict of law
principals). This warranty gives you specific legal rights, and you may also have
other rights which vary from state to state. Horizon reserves the right to change
or modify this warranty at any time without notice.
WARRANTY SERVICES
Questions, Assistance, and Services
Your local hobby store and/or place of purchase cannot provide warranty support
or service. Once assembly, setup or use of the Product has been started, you
must contact your local distributor or Horizon directly. This will enable Horizon
to better answer your questions and service you in the event that you may
need any assistance. For questions or assistance, please visit our website at
www.horizonhobby.com, submit a Product Support Inquiry, or call the toll free
telephone number referenced in the Warranty and Service Contact Information
section to speak with a Product Support representative.
Inspection or Services
If this Product needs to be inspected or serviced and is compliant in the country
you live and use the Product in, please use the Horizon Online Service Request
submission process found on our website or call Horizon to obtain a Return
Merchandise Authorization (RMA) number. Pack the Product securely using a
shipping carton. Please note that original boxes may be included, but are not
designed to withstand the rigors of shipping without additional protection. Ship
via a carrier that provides tracking and insurance for lost or damaged parcels,
as Horizon is not responsible for merchandise until it arrives and is accepted at
our facility. An Online Service Request is available at http://www.horizonhobby.
com/content/_service-center_render-service-center. If you do not have internet
access, please contact Horizon Product Support to obtain a RMA number along
with instructions for submitting your product for service. When calling Horizon,
you will be asked to provide your complete name, street address, email address
and phone number where you can be reached during business hours. When
sending product into Horizon, please include your RMA number, a list of the
included items, and a brief summary of the problem. A copy of your original
sales receipt must be included for warranty consideration. Be sure your name,
address, and RMA number are clearly written on the outside of the shipping
carton.
NOTICE: Do not ship LiPo batteries to Horizon. If you have any issue
with a LiPo battery, please contact the appropriate Horizon Product
Support office.
EN
Warranty Requirements
For Warranty consideration, you must include your original sales receipt verifying
the proof-of-purchase date. Provided warranty conditions have been met, your
Product will be serviced or replaced free of charge. Service or replacement
decisions are at the sole discretion of Horizon.
EN
Non-Warranty Service
Should your service not be covered by warranty, service will be completed and
payment will be required without notification or estimate of the expense unless
the expense exceeds 50% of the retail purchase cost. By submitting the item
for service you are agreeing to payment of the service without notification.
Service estimates are available upon request. You must include this request
with your item submitted for service. Non-warranty service estimates will be
billed a minimum of ½ hour of labor. In addition you will be billed for return
freight. Horizon accepts money orders and cashier’s checks, as well as Visa,
MasterCard, American Express, and Discover cards. By submitting any item to
Horizon for service, you are agreeing to Horizon’s Terms and Conditions found
on our website http://www.horizonhobby.com/content/_service-center_renderservice-center.
ATTENTION: Horizon service is limited to Product compliant in the
country of use and ownership. If received, a non-compliant Product
will not be serviced. Further, the sender will be responsible for
arranging return shipment of the un-serviced Product, through a
carrier of the sender’s choice and at the sender’s expense. Horizon
will hold non-compliant Product for a period of 60 days from
notification, after which it will be discarded.
Warranty, Service and Customer Service Contact Information
Country of
Purchase
United States of
America
United Kingdom
Germany
France
Horizon Hobby Contact Information Address
Horizon Service
Center
(Repairs and Repair
Requests)
Horizon Product
Support
(Product Technical
Assistance)
Sales
Service/Parts/Sales:
Horizon Hobby
Limited
Horizon Technischer
Service
Sales: Horizon Hobby
GmbH
Service/Parts/Sales:
Horizon Hobby SAS
servicecenter.horizonhobby.
com/RequestForm/
productsupport@horizonhobby.
com.
877-504-0233
websales@horizonhobby.com
800-338-4639
sales@horizonhobby.co.uk
+44 (0) 1279 641 097
service@horizonhobby.de
+49 (0) 4121 2655 100
infofrance@horizonhobby.com
+33 (0) 1 60 18 34 90
Units 1–4, Ployters Rd,
77127 Lieusaint, France
5-14-2015
4105 Fieldstone Rd
Champaign, Illinois,
61822 USA
Staple Tye, Harlow
Essex, CM18 7NS
United Kingdom
Christian-Junge-
Straße 1
25337 Elmshorn,
Germany
11 Rue Georges
Charpak
FCC Information
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from that to which the
receiver is connected.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause
undesired operation.
Notice: Modifications to this product will void the user’s authority to operate this
equipment.
This product contains a radio transmitter with wireless technology which has been
tested and found to be compliant with the applicable regulations governing a radio
transmitter in the 2.400GHz to 2.4835GHz frequency range.
IC Information
This device complies with Industry Canada license-exempt RSS standard(s). Operation
is subject to the following two conditions: (1) this device may not cause interference,
and (2) this device must accept any interference, Including interference that may
cause undesired operation of the device.
Compliance Information for the European Union
EN
Horizon Hobby, LLC hereby declares that this product is in
compliance with the essential requirements and other relevant provisions
A copy of the EU Declaration of Conformity is available online at:
http://www.horizonhobby.com/content/support-render-compliance.
of the R&TTE Directive.
Instructions for Disposal of WEEE by Users in the European
Union
This product must not be disposed of with other waste. Instead, it is the
user’sresponsibility to dispose of their waste equipment by handing it over
to adesignated collection point for the recycling of waste electrical and electronic
equipment. The separate collection and recycling of your waste equipment at the time
of disposal will help to conserve natural resources and ensure that it is recycled in
amanner that protects human health and the environment. For more information about
where you can drop off your waste equipment for recycling, please contact your local
city office, your household waste disposal service or where you purchased the product.
DE
Alle Anweisungen, Garantien und anderen zugehörigen Dokumente können
HINWEIS
im eigenen Ermessen von Horizon Hobby, LLC jederzeit geändert werden.
Die aktuelle Produktliteratur finden Sie auf horizonhobby.com unter der
Registerkarte „Support“ für das betreffende Produkt.
Die folgenden Begriffe werden in der gesamten Produktliteratur verwendet,
um auf unterschiedlich hohe Gefahrenrisiken beim Betrieb dieses Produkts
hinzuweisen:
HINWEIS: Wenn diese Verfahren nicht korrekt befolgt werden, können sich
möglicherweise Sachschäden UND eine geringe oder keine Gefahr von Verletzungen ergeben.
ACHTUNG: Wenn diese Verfahren nicht korrekt befolgt werden, ergeben sich
wahrscheinlich Sachschäden UND die Gefahr von schweren Verletzungen.
WARNUNG: Wenn diese Verfahren nicht korrekt befolgt werden, ergeben sich
wahrscheinlich Sachschäden, Kollateralschäden und schwere Verletzungen
ODER mit hoher Wahrscheinlichkeit oberflächliche Verletzungen.
Nicht geeignet für Kinder unter 14 Jahren. Dies ist kein Spielzeug.
WARNUNG: Lesen Sie die GESAMTE Bedienungsanleitung durch, um
sich vor der Inbetriebnahme mit den Funktionen des Produkts vertraut zu
machen. Wird dieses Produkt nicht korrekt betrieben, kann dies zu Schäden
am Produkt oder anderen Sachschäden und zu schweren Verletzungen führen.
Dies ist ein hochentwickeltes Hobbyprodukt und KEIN Spielzeug. Es muss
mit Vorsicht und gesundem Menschenverstand betrieben werden und erfordert gewisse technische Grundfähigkeiten. Wird dieses Produkt nicht auf
eine sichere und verantwortungsvolle Weise betrieben, kann dies zu Verletzungen oder Schäden am Produkt oder anderen Sachwerten führen. Dieses
Produkt eignet sich nicht für die Verwendung durch Kinder ohne direkte
Überwachung eines Erwachsenen. Versuchen Sie nicht ohne Genehmigung
durch Horizon Hobby, LLC, das Produkt zu zerlegen, es mit inkompatiblen
Komponenten zu verwenden oder auf jegliche Weise zu erweitern. Diese
Bedienungsanleitung enthält Anweisungen für Sicherheit, Betrieb und
Wartung. Es ist unbedingt notwendig, vor Zusammenbau, Einrichtung oder
Verwendung alle Anweisungen und Warnhinweise im Handbuch zu lesen und
zu befolgen, damit das Produkt bestimmungsgemäß betrieben werden kann
und Schäden oder schwere Verletzungen vermieden werden.
WARNUNG ZU GEFÄLSCHTEN PRODUKTEN
Bitte kaufen Sie Ihre Spektrum Produkte immer von einem autorisiertem
Händler um sicherzu stellen, dass Sie ein authentisches hochqualitatives original Spektrum Produkt gekauft haben. Horizon Hobby lehnt jede
Unterstützung, Service oder Garantieleistung von gefälschten Produkten oder
Produkten ab die von sich in Anspruch nehmen kompatibel mit Spektrum
oder DSM zu sein.
HINWEIS: Dieses Produkt ist ausschließlich für die Verwendung in
unbemanten, ferngesteuerten Fahrzeugen und Fluggeräten im Hobbybereich
vorgese-hen. Horizon Hobby lehnt jede Haftung und Garantieleistung ausserhalb der vorgesehen Verwendung ab.
GARANTIE REGISTRIERUNG
Registrieren Sie bitte Ihr Produkt unter www.spektrumrc.com/registration.
Loading...