Horizon Hobby DASRX18 User Manual

SR310 Instruction Manual
SR310 Bedienungsanleitung
Manuel d’utilisation SR310
Manuale di istruzioni SR310

EN

NOTICE

All instructions, warranties and other collateral documents are subject to
change at the sole discretion of Horizon Hobby, Inc. For up-to-date product
literature, visit horizonhobby.com and click on the support tab for this
product.

Meaning of Special Language

The following terms are used throughout the product literature to indicate
various levels of potential harm when operating this product:
NOTICE: Procedures, which if not properly followed, create a possibility
of physical property damage AND a little or no possibility of injury.
CAUTION: Procedures, which if not properly followed, create the probability
of physical property damage AND a possibility of serious injury.
WARNING: Procedures, which if not properly followed, create the probability
of property damage, collateral damage, and serious injury OR create a high
probability of superficial injury.

Age Recommendation: Not for children under 14 years. This is not a toy.

WARNING: Read the ENTIRE instruction manual to become familiar

with the features of the product before operating. Failure to operate the
product correctly can result in damage to the product, personal property and
cause serious injury.

This is a sophisticated hobby product. It must be operated with caution and
common sense and requires some basic mechanical ability. Failure to oper­ate this Product in a safe and responsible manner could result in injury or
damage to the product or other property. This product is not intended for use
by children without direct adult supervision. Do not attempt disassembly, use
with incompatible components or augment product in any way without the
approval of Horizon Hobby, Inc. This manual contains instructions for safety,
operation and maintenance. It is essential to read and follow all the instruc­tions and warnings in the manual, prior to assembly, setup or use, in order to
operate correctly and avoid damage or serious injury.

WARNING AGAINST COUNTERFEIT PRODUCTS

Always purchase from a Horizon Hobby, Inc. authorized dealer to ensure
authentic high-quality Spektrum product. Horizon Hobby, Inc. disclaims all
support and warranty with regards, but not limited to, compatibility and
performance of counterfeit products or products claiming compatibility with
DSM or Spektrum technology.

NOTICE: This product is only intended for use with unmanned, hobby-grade,
remote-controlled vehicles and aircraft. Horizon Hobby disclaims all liability
outside of the intended purpose and will not provide warranty service related
thereto.

WARRANTY REGISTRATION

Visit community.spektrumrc.com today to register your product.

SR310 Instruction Manual

The Spektrum™ SR310 4-channel DSMR® Sport Surface receiver is compat­ible with all Spektrum DSMR surface transmitters. The SR310 receiver is NOT
compatible with DSM® or DSM2® transmitters.

Specifications

Type: DSMR
Dimensions (LxWxH): 1.30 x .80 x .53 in (32.8 x 20.3 x 13.5mm)
Channels: 4 Weight: 0.25 oz (7.2 g)
Band: 2.4GHz Voltage Range: 3.2–9.6V

LED

Bind/Battery Port

Bind Plug

Antenna

FPO

Aux 2 Port

Aux 1 Port

Throttle Port

Steering Port

Receiver Connection and Installation

Install the Receiver in your vehicle using double-sided foam servo tape. Foam

servo tape will hold the receiver in place and help isolate it from vibrations.
Mount the antenna up and away from the vehicle in an antenna tube. The
higher up the antenna is, the better signal it will receive. The last 31mm of
the antenna is the portion that receives the signal from the transmitter.

NOTICE: Do not cut or modify the antenna.

EN

Failsafe

The throttle failsafe position is set during binding. In the unlikely event that
the radio link is lost during use, the receiver will drive the the throttle servo
to its pre-programmed failsafe position (normally full brakes) and all other
channels will have no servo output. If the receiver is turned on prior to turning
on the transmitter, the receiver will enter the failsafe mode, driving the the
throttle servo to its preset failsafe position. When the transmitter is turned on,
normal control is resumed.

IMPORTANT: Failsafe activates only in the event that signal is lost from the

transmitter. Failsafe will NOT activate in the event that receiver battery power
decreases below the recommended minimums or power to the receiver is lost.