Horizon Fitness WT951 User Manual

HZ SERIES

FOR MODEL :

WT951

TREADMILL U S E R ’ S GUIDE

IN TRODUCTION

CONGRATULATIONS and THANK YOU for your purchase of this Horizon Fitness treadmill!

Whether your goal is to win races or simply enjoy a fuller, healthier lifestyle, a Horizon Series treadmill
can help you attain it – adding club-quality performance to your at-home workouts, with the ergonomics
and innovative features you need to get stronger and healthier, faster. Because we're committed to
designing fitness equipment from the inside out, we use only the highest quality components. It's a
commitment we back with one of the strongest frame-to-motor warranty packages in the industry.

You want exercise equipment that offers the most comfort, the best reliability and the highest quality
in its class.

Horizon Series treadmills deliver.

INTRODUCTION

IMPORTANT

PRECAUTIONS

ASSEMBLY

TA B L E OF CO N T E NT S

Important Precautions

Assembly

Before You Begin

Treadmill Operation

Conditioning Guidelines

Troubleshooting & Maintenance

12

15

23

31

BEFORE

YOU BEGIN

4

TREADMILL

OPERATION

6

GUIDELINES

CONDITIONING

Limited Warranty

CONTACT INFORMATION

34

Back Panel

& MAINTENANCE

TROUBLESHOOTING

LIMITED

WARRANTY

3

INTRODUCTION

WARNING

WARNING

3-Pole Grounded Outlet

GROUNDED
TREADMILL
POWER CORD

IM PORTA NT PR EC AU TIONS

PRECAUTIONS

IMPORTANT

ASSEMBLY

YOU BEGIN

BEFORE

SAVE THESE INSTRUCTIONS

Read all instructions before using this treadmill. When using an electrical product, basic precautions
should always be followed, including the following: Read all instructions before using this treadmill. It is the
responsibility of the owner to ensure that all users of this treadmill are adequately informed of all warnings
and precautions. If you have any questions after reading this manual, contact Horizon Fitness at the number
listed on the back panel of this manual.

Connect this exercise product to a properly grounded outlet only. See grounding
instructions.

GROUNDING INSTRUCTIONS

This product must be grounded. If a treadmill should malfunction or breakdown, grounding provides a path
of least resistance for electrical current to reduce the risk of electrical shock. This product is equipped with
a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an
appropriate outlet that is properly installed and grounded in accordance with local codes and ordinances.

OPERATION

TREADMILL

CONDITIONING

GUIDELINES

This product is for use on a nominal 110-volt circuit and
has a grounding plug that looks like the illustration
below. This product must be used on a dedicated
circuit. To determine if you are on a dedicated circuit,

TROUBLESHOOTING

& MAINTENANCE

shut off the power to that circuit and observe if any other
devices lose power. If so, move devices to a different
circuit. Note: There are usually multiple outlets on one
circuit. It is recommended that the treadmill be used
with a 20 amp circuit for optimal performance.

Improper connection of the equipment-grounding conductor can result in a risk of
electric shock. Check with a qualified electrician or serviceman if you are in doubt
as to whether the product is properly grounded. Do not modify the plug provided
with the product. If it will not fit the outlet, have a proper outlet installed by a
qualified electrician.

WARRANTY

LIMITED

4

To reduce the risk of burns, fire, electrical shock or injury to persons:

WARNING

WARNING

• Never use the treadmill before securing the safety tether clip to your clothing.

• If you experience chest pains, nausea, dizziness, or shortness of breath, stop exercising immediately and
consult your physician before continuing.

• Do not wear clothes that might catch on any part of the treadmill.

• Always wear athletic shoes while using this equipment.

• Do not jump on the treadmill.

• Keep power cord away from heated surfaces.

• Do not insert or drop any object into any opening.

• Unplug treadmill before moving or cleaning it. To clean, wipe surfaces down with soap and slightly damp
cloth only; never use solvents. (See MAINTENANCE)

• At no time should more than one person be on treadmill while in operation.

• The treadmills should not be used by persons weighing more than 325 pounds. Failure to comply will
void the warranty.

• The treadmills are intended for in-home use only. Do not use this treadmill in any commercial, rental,
school or institutional setting. Failure to comply will void the warranty.

• Do not use treadmill in any location that is not temperature controlled, such as garages, porches, pool
rooms, bathrooms, car ports or outdoors. Failure to comply may void the warranty.

• Use the treadmill only as described in this manual.

INTRODUCTION

IMPORTANT

PRECAUTIONS

ASSEMBLY

BEFORE

YOU BEGIN

At NO time should pets or children under the age of 12 be closer to the treadmill than 10 feet.
At NO time should children under the age of 12 use the treadmill.
Children over the age of 12 should not use the treadmill without adult supervision.

OTHER SAFETY TIPS FOR YOUR TREADMILL

OPERATION

To reduce the risk of damaging important components on your treadmill, it is strongly
recommended that your treadmill is plugged into a dedicated 20 amp outlet, without
the use of an additional extension cord and/or power strip.

IMPORTANT: The treadmill is not compatible with GFCI-equipped outlets.

It is essential that your treadmill is used only indoors, in a climate controlled room. If your treadmill has been
exposed to colder temperatures or high moisture climates, it is strongly recommended that the treadmill is
warmed up to room temperature before first time use. Failure to do so may cause premature electronic failure.

TREADMILL

OPERATION

GUIDELINES

CONDITIONING

& MAINTENANCE

TROUBLESHOOTING

LIMITED

WARRANTY

5

INTRODUCTION

WARNING

PRECAUTIONS

IMPORTANT

ASSEMBLY

AS SEMBLY

IMPORTANT: READ THESE SAFETY INSTRUCTIONS BEFORE USE!

During the assembly process of the treadmill there are several areas that special attention must be paid.
It is very important to follow the assembly instructions correctly and to make sure all parts are firmly
tightened. If the assembly instructions are not followed correctly, the treadmill could have frame parts that
are not tightened and will seem loose and may cause irritating noises. There should be no side-to-side play
in the console masts or any forward and back play in the console assembly or handlebars. If there is any
play in these areas, the treadmill has not been properly assembled. To prevent damage to the treadmill, the
assembly instructions must be reviewed and corrective actions should be taken.

YOU BEGIN

BEFORE

OPERATION

TREADMILL

CONDITIONING

GUIDELINES

TROUBLESHOOTING

& MAINTENANCE

UNPACKING

Place the treadmill carton on a level flat surface. It is recommended that you place a protective covering on
your floor. Take CAUTION when handling and transporting this unit. Never open box when it is on its side.
Once the banding straps have been removed, do not lift or transport this unit unless it is fully assembled
and in the upright folded position, with the lock latch secure. Unpack the unit where it will be used. The
enclosed treadmill is equipped with high-pressure shocks and may spring open if mishandled. Never grab
hold of any portion of the incline frame and attempt to lift or move the treadmill. FAILURE TO FOLLOW THESE
INSTRUCTIONS COULD RESULT IN INJURY!

Before proceeding, find your treadmill’s serial number
and model name located to the left of the on/off
power switch and power cord and enter it in the space
provided below.

ENTER YOUR SERIAL NUMBER AND
MODEL NAME IN THE BOXES BELOW:

WARRANTY

LIMITED

6

SERIAL NUMBER :

MODEL NAME:

* Refer to the SERIAL NUMBER and MODEL NAME when calling for service.

TOOLS INCLUDED

4 mm Allen Wrench

5 mm Allen Wrench

6 mm T-Wrench

PARTS INCLUDED

1 Safety Key
1 Console Assembly (located under treadmill deck)
1 Power Cord
1 Wireless Pedometer
1 Cross Bar
2 Handlebars
1 Accessory Rack
4 Hardware Bags

READING RACK

WATER BOTTLE HOLDER

GRIP PULSE HANDRAILS

ON/OFF SWITCH

CIRCUIT BREAKER

FOOT PLATE

TRANSPORT WHEEL

SAFEY KEY PLACEMENT

POWER CORD

AIR CELL CUSHION

CONSOLE

TOUCH PAD PANEL WITH BLUE BACK-LIT DISPLAY

HANDLEBARS

ACCESSORY RACK / CROSS BAR

MOTOR COVER

RUNNING BELT / RUNNING DECK

SIDE RAIL

ROLLER END CAP

CONSOLE MAST

REAR ROLLER

ADJUSTMENT BOLTS

FOOT LOCK LATCH

If you have questions or if there are any missing parts, contact Customer Tech Support.

Contact information is located on the back panel of this manual.

For a complete exploded diagram, visit us at www.horizonfitness.com

INTRODUCTION

IMPORTANT

PRECAUTIONS

ASSEMBLY

BEFORE

YOU BEGIN

TREADMILL

OPERATION

GUIDELINES

CONDITIONING

& MAINTENANCE

TROUBLESHOOTING

LIMITED

WARRANTY

7

INTRODUCTION

WARNING







#0-5"
NN
2UZ

-&'5$0/40-&."45

-&'54*%&-*/,"(&"3.

#0-5"

PRECAUTIONS

IMPORTANT

PRE-AS S E M B LY

DO NOT CUT STRAPS UNTIL STEP 1-E!* Disassemble box and remove the

cardboard packaging that is not beneath the treadmill. Do not attempt to lift the
treadmill at this time. Remove plastic wrap from console masts.

NOTE: During each assembly step, ensure that ALL nuts and bolts are in place and partially threaded in before

completely tightening any ONE bolt. NOTE: A light application of grease may aid in the installation of hardware.
Any grease, such as lithium bike grease is recommended.

ASSEMBLY

YOU BEGIN

BEFORE

OPERATION

TREADMILL

CONDITIONING

GUIDELINES

ASSEMBLY S T E P 1

HARDWARE BAG 1 CONTENTS :

A

Open HARDWARE BAG 1.

B

Lift LEFT CONSOLE MAST into
upright position. Be sure to hold
the console mast firmly, as it
will not stay in the upright
position on it’s own.

C

Move LEFT SIDE LINKAGE ARM
into position. Insert BOLT (A)
and tighten.

D

Repeat on the right side.

E

Now cut the banding straps and
remove remaining packaging
material.*

TROUBLESHOOTING

& MAINTENANCE

WARRANTY

LIMITED

8

* NOTE: If the straps have been removed before completing step 1-D and the linkage arms can not be aligned,

refer to the TROUBLESHOOTING section (page 28) in order to restore the treadmill to its proper position.

F

Lift the RUNNING DECK until
lock latch on side of treadmill
is fully engaged.

G

Remove CONSOLE from box
and place out of the way.

H

Lower the treadmill RUNNING
DECK from the folded position

by stepping on LOCK LATCH on
lower right side.

ASSEMBLY S T E P 2

#0-5#

-0$,
8"4)&3$

"3$8"4)&3%

$0/40-&$"#-&

%0/05"55"$)

5)*44*%&6/5*-45&1'

ASSEMBLED IN STEP 2-D

#0-5#
NN
2UZ

UPQWJFX

BOHMFWJFX

-0$,8"4)&3$
2UZ

"3$8"4)&3%
2UZ

HARDWARE BAG 2 CONTENTS :

A

Open HARDWARE BAG 2.

B

With running deck in lowered
position, place CONSOLE
on upright masts. Slide the
brackets that are underneath the
console into the top holes of the
upright masts.

C

Place LOCK WASHER (C) and
BOLT (B)

into flat side of LEFT

upright MAST and lightly tighten.

D

Place ARC WASHER (D) and BOLT
(B) into curved side of LEFT
upright MAST and lightly tighten.

E

Gently lift RIGHT side of the
console to connect the CONSOLE
CABLE. Carefully tuck wires in
mast to avoid damage. NOTE: Do
not pinch console cable or grip
pulse wires.

INTRODUCTION

IMPORTANT

PRECAUTIONS

ASSEMBLY

BEFORE

YOU BEGIN

* Be sure to tighten bolts after all are lined up.

* NOTE: Be careful not to pinch any

wires while assembling the masts.

F

Repeat steps C-D above to
assemble the right side upright
mast and console.

G

Tighten all bolts completely.

TREADMILL

OPERATION

GUIDELINES

CONDITIONING

& MAINTENANCE

TROUBLESHOOTING

LIMITED

WARRANTY

9

INTRODUCTION

BOLT (E)
15 mm
Qty: 4

BOLT (J)
38 mm
Qty: 2

FLAT WASHER (G)
12 mm
Qty: 4

SLEEVE (I)

26.5 mm
Qty: 2

SPRING WASHER (F)
10 mm
Qty: 4

SCREW (H)
12 mm
Qty: 5

$0/40-&."45

#0-5&

413*/(8"4)&3'

'-"58"4)&3(

$3044#"3

4$3&84)

#0-5+

4-&&7&*

4503"(&3"$,

$0/40-&."45

$3044#"3

PRECAUTIONS

IMPORTANT

ASSEMBLY S T E P 3

HARDWARE BAG 3 CONTENTS :

ASSEMBLY

YOU BEGIN

BEFORE

OPERATION

TREADMILL

CONDITIONING

GUIDELINES

STEPS A-C

STEPS D-G

A Open HARDWARE BAG 3.

B Align CROSS BAR with holes in

CONSOLE MAST.

C Insert 1 BOLT (E), 1 SPRING

WASHER (F) and 1 WASHER
(G) into the bottom holes of
the CROSS BAR.

NOTE: Do not insert the top

bolts until Step 3-F, after
the STORAGE RACK has been
attached.

D Attach 2 SLEEVES (I) to BOLTS

(J). Insert 2 BOLTS (J) into
CONSOLE MASTS.

E Slide STORAGE RACK over

SUPPORT BAR and snap
bottom of STORAGE RACK to
BOLTS (J).

TROUBLESHOOTING

& MAINTENANCE

WARRANTY

LIMITED

10

F Now you may insert the top 2

BOLTS (E) into the SUPPORT
BAR. Tighten all 4 BOLTS (E).

G Attach STORAGE RACK to

CROSS BAR using 5 SCREWS
(H).

ASSEMBLY S T E P 4

108&348*5$)

$*3$6*5#3&",&3

#0-5,
NN
2UZ

BOHMFWJFX

"3$8"4)&3-
2UZ

"3$8"4)&3-

#0-5,

)"/%-&#"3

$0/40-&

HARDWARE BAG 4 CONTENTS :

A Open HARDWARE BAG 4.

B Slide HANDLEBARS onto

CONSOLE.

C Attach HANDLEBARS to

CONSOLE using 4 BOLTS (K)
and 4 ARC WASHERS (L).

INTRODUCTION

IMPORTANT

PRECAUTIONS

ASSEMBLY

BEFORE

YOU BEGIN

D Connect power plug to the

treadmill and connect the cord to
a power outlet. The on/off switch
is located next to the power
cord. Flip this switch to the ‘on’
position, so that the switch is
lit. You will hear a beep and the
console will light up.

YOU’RE FINISHED!

11

TREADMILL

OPERATION

GUIDELINES

CONDITIONING

& MAINTENANCE

TROUBLESHOOTING

LIMITED

WARRANTY