Horizon Fitness T82 operation manual

BENUTZERHANDBUCH

GEBRUIKSHANDLEIDING

MANUEL DU PROPRIÉTAIRE

Read the TREADMILL GUIDE before using this OWNER’S MANUAL. Lesen Sie zunächst die ANLEITUNG ZUM LAUFBAND, bevor Sie dieses BENUTZERHANDBUCH konsultieren. Lees de LOOPBANDGIDS voor u deze GEBRUIKERSHANDLEIDING gebruikt. Veuillez lire le GUIDE DU TAPIS DE COURSE avant d’utiliser ce MANUEL DU PROPRIÉTAIRE.

T82

OWNER’S MANUAL

3 ENGLISH

25 DEUTSCH

47 NEDERLANDS

69 FRANÇAIS

ASSEMBLY

WARNING

There are several areas during the assembly process that special attention must be paid. It is very important to follow the assembly instructions correctly and to make sure all parts are firmly tightened. If the assembly instructions are not followed correctly, the treadmill could have frame parts that are not tightened and will seem loose and may cause irritating noises. To prevent damage to the treadmill, the assembly instructions must be reviewed and corrective actions should be taken.

Before proceeding, find your treadmill’s serial number located on the front stabilizer tube and enter it in the space provided below. Also locate the model name which is next to the serial number.

ENTER YOUR SERIAL NUMBER AND MODEL NAME IN THE BOXES BELOW:

SERIAL NUMBER:

MODEL NAME: HORIZON TREADMILL

ENGLISH

GRIP PULSE HANDRAILS

HANDLEBARS

CONSOLE MAST

MOTOR COVER

WATER BOTTLE HOLDER

CONSOLE

SAFETY KEY PLACEMENT

ON/OFF SWITCH

CIRCUIT BREAKER

TOOLS INCLUDED:

F 5 mm L-Wrench /screwdriver F 6 mm L-Wrench

PARTS INCLUDED:

F 1 Console Assembly F 2 Console Masts F 1 Hardware Kit F 1 Safety Key F 1 Power Cord F 1 Silicone

PRE ASSEMBLY

UNPACKING

Place the treadmill carton on a level flat surface. It is recommended that you place a protective covering on your floor. Take CAUTION when handling and transporting this unit. Never open box when it is on its side. Once the banding straps have been removed, do not lift or transport this unit unless it is fully assembled. Unpack and assemble the unit where it will be used. Never grab hold of any portion of the incline frame and attempt to lift or move the treadmill.

WARNING

DO NOT ATTEMPT TO LIFT THE TREADMILL! Do not move or lift treadmill from packaging until specified to do so in the assembly instructions. You may remove the plastic wrap from console masts.

ENGLISH

TRANSPORT WHEEL

RUNNING BELT / RUNNING DECK

SIDE RAIL

POWER CORD

S/N STICKER

REAR ROLLER TENSION / ADJUSTMENT BOLTS

NEED HELP?

If you have questions or if

there are any missing parts,

contact your local dealer.

WARNING

FAILURE TO FOLLOW THESE INSTRUCTIONS COULD RESULT IN INJURY!

NOTE: During each assembly step, ensure that ALL nuts and bolts are in place and partially threaded in before completely tightening any ONE bolt.

NOTE: A light application of grease may aid in the installation of hardware. Any grease, such as lithium bike grease is recommended.

ENGLISH

ASSEMBLY STEP 1 ASSEMBLY STEP 2

ENGLISH

LONG BOLT (A) M8 X 50L QTY: 4

ARC WASHER (C) Ø 8 QTY: 2

HARDWARE FOR STEP 1

RIGHT CON SOLE MAST

LEFT CONSOLE MAST

MAIN FRAME B RACKET

SHORT BOLT (B) M8 X 16L QTY: 2

FLAT WASHER (D) Ø 8 QTY: 4

A A Open the box and remove all parts underneath

the running deck by lifting the running deck upward.

B Open HARDWARE PARTS for Step 1

C Align and attach LEFT CONSOLE MAST with base

frame bracket by using 2 LONG BOLTS (A), 1 SHORT BOLTS (B), 2 FLAT WASHERS (D) and 1 ARC WASHER (C).

D Connect the CONSOLE CABLES at RIGHT

CONSOLE MAST and carefully tuck wires to CONSOLE MAST to avoid damage.

E Repeat Step C on the RIGHT CONSOLE MAST.

NOTE: Do not pinch or break any wire when assembling the console mast. You may need extra help assembling step 1 o 2 and DO NOT fully tighten the bolts until step 2 is completed.

HARDWARE FOR STEP 2

SHORT BOLT (B) M8 X 16L QTY: 4

c b

LEFT CONS OLE MAST

ARC WASHER (C) Ø 8 QTY: 4

RIG HT CONSOLE MAST

A Open HARDWARE PARTS for Step 2

B Gently hold the CONSOLE above the CONSOLE

MAST.

C Connect the CONSOLE CABLES at right hand

side, carefully tucking wires in RIGHT CONSOLE MAST to avoid damage.

Attach the CONSOLE to the CONSOLE

MAST

using 4 SHORT BOLTS (B) and 4 FLAT

WASHERS (C).

NOTE: Console fixing from beneath. Be careful not to pinch any wires and make sure you fully tighten all bolts before starting using the treadmills.

ENGLISH

ASSEMBLY STEP 3

TREADMILL OPERATION

ASSEMBLY COMPLETE!

This section explains how to use your treadmill’s console and programming. The BASIC OPERATION section in the TREADMILL GUIDE has instructions for the following:

• LOCATION OF THE TREADMILL

• USING THE SAFETY KEY

• FOLDING THE TREADMILL

• MOVING THE TREADMILL

• LEVELING THE TREADMILL

• TENSIONING THE RUNNING BELT

• CENTERING THE RUNNING BELT

• USING THE HEART RATE FUNCTION

T82

Product Weight: 61 kg / 134 lbs.

ENGLISH

User Weight Capacity: 115 kg / 253 lbs.

Dimensions (L×W×H) : 186 x 70 x 132 cm / 73” x 28” x 52”

Folded Dimensions (L×W×H) :

46” x 28” x 57”

116 x 70 x 144 cm /

ENGLISH

DISTANCE

ENTFERNUNG

SPEED

GESCHWINDIGKEIT

HEART RATE

HERZFREQUENZ

ENERGYSAVER

ENERGIESPARMODUS

km/h

km/h12km/h

SPEED

GESCHWINDIGKEIT

START

QUICK START

TIME

ZEIT

ENTER

EINGABE

CHANGE DISPLAY

ANZEIGENWECHSEL

STEP

SCHRITTE

HOLD TO RESET

ZUM ZURÜCKSETZEN

GEDRÜCKT HALTEN

STOP

STOPP

INCLINE

STEIGUNG

CALORIES

KALORIEN

BMI TEST

B C

BMI TEST

6 % 9 %3 %

INCLINE

STEIGUNG

D E G H I JF

T82 CONSOLE OPERATION

Note: There is a thin protective sheet of clear plastic on the overlay of the console that should be removed before use.

A) LED DISPLAY WINDOWS: Time, Distance,Speed, Incline, Calories, Heart Rate and Steps (with 10K Steps program only). B) BMI TEST: BMI test direct key. Input your weight and height after pressing this key. Your machine will help you calculate your BMI index

for furture tracking.

C) ENERGY SAVER : To minimize energy consumption, your machine will enter energy saver mode automatically (after entering stand-by

mode for 15 mins) and could be quickly waken up with a touch of a button.

D) PROGRAM DIRECT KEYS: Intuitive direct key help you set your program more easily. (Refer to program information for more details). E) INCLINE KEYS: used to adjust incline in small increments (0.5% Increments). F) ENTER BUTTON : used to confirm setting of workout program or user profile. G) START: press to begin exercising, start your workout, or resume exercising after pause. H) SAFETY KEY POSITION: enables treadmill when safety key is inserted. I) STOP: press to pause/end your workout. Hold for 3 seconds to reset the console. J) SPEED KEYS: used to adjust speed in small increments (0.1 KMH increments).

ENGLISH

1110

ENGLISH

T82 DISPLAYS

DISTANCE

ENTFERNUNG

INCLINE

STEIGUNG

CALORIES

KALORIEN

TIME

ZEIT

SCHRITTE

STEP

SPEED

GESCHWINDIGKEIT

HEART RATE

HERZFREQUENZ

DISPLAY WINDOWS

• TIME: Shown as minutes : seconds. View the time

remaining or the time elapsed in your workout.

• DISTANCE: Shown as km or miles. Indicates distance

traveled or distance remaining during your workout.

• SPEED: Shown as MPH or KMPH. Indicates how fast

your walking or running surface is moving.

• CALORIES: Total calories burned or calories

remaining left to burn during your workout.

• HEART RATE: Shown as BPM (beats per minute).

Used to monitor your heart rate (displayed when contact is made with both pulse grips).

• INCLINE: Shown as percent. Indicates the incline of your

walking or running surface.

• STEPS: (Use on 10K Steps program only). To display the

steps remained in your workout.

GETTING STARTED

1) Check to make sure no objects are placed on the belt that will hinder the movement of the treadmill.

2) Plug in the power cord and turn the treadmill ON.

3) Stand on the side rails of the treadmill.

4) Attach the safety key clip to part of your clothing making sure that it is secure and will not become detached during operation.

5) Insert the safety key into the safety keyhole in the console.

6) You have two options to start your workout:

A) QUICK START UP

Simply press the START key to begin working out. Time, distance, and calories will all count up from zero. OR...

B) SELECT A PROGRAM

1) Select program by pressing the DIRECT BUTTON or using ARROW key, press ENTER to confirm setting.

2) If needed, select level by pressing UP and DOWN ARROW KEY, press ENTER to confirm.

3) When setup is complete, press START to begin your workout.

TO CLEAR SELECTION/RESET THE CONSOLE

Hold STOP key for 3 seconds.

FINISHING YOUR WORKOUT

When your workout is complete, the treadmill will stop and beep. You can turn off the machine or it will enter Energy Saver Mode in 15 mins.

ENGLISH

1312

ENGLISH

PROGRAM INFORMATION

NOTE:

1) If speed or incline are changed during your workout, the remaining segments will be affected accordingly.

2) T82 contain: calorie goal, weight loss, leg toner & 10K Steps.

1) CALORIE GOAL: Set your target calorie you want to burn today and then the speed desired. Your machine will lead you

through a workout joruney and help you complete your task. When you use this program you can adjust your speed and incline level during your workout. The console will automatically transfer to Calories burn and count down from your target calories.

2) WEIGHT LOSS: Promotes weight loss by increasing and decreasing the speed and incline, while keeping you in your fat

burning zone. Speed and Incline changes, segments repeat every 30 seconds.times.

(Metric, km/h)

Segment Warm Up 1 2 3 4 5 6 7 8 Cool Down

Time 4:00

Level 1

Level 2

Level 3

Level 4

Level 5

Level 6

Level 7

Level 8

Level 9

Level 10

Level 1

Level 2

Level 3

Level 4

Level 5

Level 6

Level 7

Level 8

Level 9

Level 10

Incline 0.0 0.5 1.5 1.5 1.0 0.5 0.5 0.5 1.0 1.5 0.5 0.0 Speed 1.6 2.4 3.2 4.0 4.8 5.6 6.4 5.6 4.8 4.0 3.6 2.4 Incline 0.0 0.5 1.5 1.5 1.0 0.5 1.0 0.5 1.0 1.5 0.5 0.0 Speed 2.0 3.0 4.0 4.8 5.6 6.4 7.2 6.4 5.6 4.8 4.1 2.8 Incline 0.5 1.0 2.0 2.0 1.5 1.0 1.0 1.0 1.5 2.0 1.0 0.5 Speed 2.4 3.6 4.8 5.6 6.4 7.2 8.0 7.2 6.4 5.6 4.8 3.2 Incline 0.5 1.0 2.0 2.0 1.5 1.0 1.0 1.0 1.5 2.0 1.0 0.5 Speed 2.8 4.1 5.6 6.4 7.2 8.0 8.8 8.0 7.2 6.4 5.4 3.6 Incline 1.0 1.5 2.5 2.5 2.0 1.5 1.5 1.5 2.0 2.5 1.5 1.0 Speed 3.2 4.8 6.4 7.2 8.0 8.8 9.6 8.8 8.0 7.2 6.0 4.0 Incline 1.0 1.5 2.5 2.5 2.0 1.5 1.5 1.5 2.0 2.5 1.5 1.0 Speed 3.6 5.4 7.2 8.0 8.8 9.6 10.4 9.6 8.8 8.0 6.5 4.4 Incline 1.5 2.0 3.0 3.0 2.5 2.0 2.0 2.0 2.5 3.0 2.0 1.5 Speed 4.0 6.0 8.0 8.8 9.6 10.4 11.2 10.4 9.6 8.8 7.2 4.8 Incline 1.5 2.0 3.0 3.0 2.5 2.0 2.0 2.0 2.5 3.0 2.0 1.5 Speed 4.4 6.5 8.8 9.6 10.4 11.2 12.0 11.2 10.4 9.6 7.8 5.2 Incline 2.0 2.5 3.5 3.5 3.0 2.5 2.5 2.5 3.0 3.5 2.5 2.0 Speed 4.8 7.2 9.6 10.4 11.2 12.0 12.8 12.0 11.2 10.4 8.4 5.6 Incline 2.0 2.5 3.5 3.5 3.0 2.5 2.5 2.5 3.0 3.5 2.5 2.0 Speed 5.2 7.8 10.4 11.2 12.0 12.8 13.6 12.8 12.0 11.2 8.9 6.0

Segment Warm Up 1 2 3 4 5 6 7 8 Cool Down

Time 4:00

Incline 0.0 0.5 1.5 1.5 1.0 0.5 0.5 0.5 1.0 1.5 0.5 0.0 Speed 1.0 1.5 2.0 2.5 3.0 3.5 4.0 3.5 3.0 2.5 2.3 1.5 Incline 0.0 0.5 1.5 1.5 1.0 0.5 1.0 0.5 1.0 1.5 0.5 0.0 Speed 1.3 1.9 2.5 3.0 3.5 4.0 4.5 4.0 3.5 3.0 2.6 1.8 Incline 0.5 1.0 2.0 2.0 1.5 1.0 1.0 1.0 1.5 2.0 1.0 0.5 Speed 1.5 2.3 3.0 3.5 4.0 4.5 5.0 4.5 4.0 3.5 3.0 2.0 Incline 0.5 1.0 2.0 2.0 1.5 1.0 1.0 1.0 1.5 2.0 1.0 0.5 Speed 1.8 2.6 3.5 4.0 4.5 5.0 5.5 5.0 4.5 4.0 3.4 2.3 Incline 1.0 1.5 2.5 2.5 2.0 1.5 1.5 1.5 2.0 2.5 1.5 1.0 Speed 2.0 3.0 4.0 4.5 5.0 5.5 6.0 5.5 5.0 4.5 3.8 2.5 Incline 1.0 1.5 2.5 2.5 2.0 1.5 1.5 1.5 2.0 2.5 1.5 1.0 Speed 2.3 3.4 4.5 5.0 5.5 6.0 6.5 6.0 5.5 5.0 4.1 2.8 Incline 1.5 2.0 3.0 3.0 2.5 2.0 2.0 2.0 2.5 3.0 2.0 1.5 Speed 2.5 3.8 5.0 5.5 6.0 6.5 7.0 6.5 6.0 5.5 4.5 3.0 Incline 1.5 2.0 3.0 3.0 2.5 2.0 2.0 2.0 2.5 3.0 2.0 1.5 Speed 2.8 4.1 5.5 6.0 6.5 7.0 7.5 7.0 6.5 6.0 4.9 3.3 Incline 2.0 2.5 3.5 3.5 3.0 2.5 2.5 2.5 3.0 3.5 2.5 2.0 Speed 3.0 4.5 6.0 6.5 7.0 7.5 8.0 7.5 7.0 6.5 5.3 3.5 Incline 2.0 2.5 3.5 3.5 3.0 2.5 2.5 2.5 3.0 3.5 2.5 2.0 Speed 3.3 4.9 6.5 7.0 7.5 8.0 8.5 8.0 7.5 7.0 5.6 3.8

min

30 sec 30 sec 30 sec 30 sec 30 sec 30 sec 30 sec 30 sec

min

30 sec 30 sec 30 sec 30 sec 30 sec 30 sec 30 sec 30 sec

4:00 min

(British, MPH)

4:00 min

ENGLISH

1514

ENGLISH

3) LEG TONER: Promotes lower body workout and tone your leg by increasing and decreasing the speed and incline. Speed

and Incline changes, segments repeat every 30 seconds. To tone your leg musle you need to workout properly and following guidence below:

1) Streching your leg properly.

2) Start with slow speed and alwasy walk with your heel touching ground softly. (A pair of proper running shoes is recommended)

3) Finish all workout or at least for 30mins.

4) Drink 500-1000 ml. of water slowly after workout.

5) Massage your leg and feet after workout.

6) repeat workout 2-3 times/week and do not over exercise at all time.

(Metric, km/h)

Segments Warm-Up 1 2 3 4 5 6 7 8 Cool Down

Time 4:00 Level 1 0.8 1.6 2.4 3.2 4.0 4.8 5.6 4.8 4.0 3.2 1.6 0.8 Level 2 0.8 1.6 3.2 4.0 4.8 5.6 6.4 5.6 4.8 4.0 1.6 0.8 Level 3 0.8 2.4 4.0 4.8 5.6 6.4 7.2 6.4 5.6 4.8 2.4 1.6 Level 4 0.8 2.4 4.8 5.6 6.4 7. 2 8.0 7. 2 6.4 5.6 2.4 1.6 Level 5 0.8 3.2 5.6 6.4 7.2 8.0 8.8 8.0 7. 2 6.4 3.2 1.6 Level 6 0.8 3.2 6.4 7.2 8.0 8.8 9.6 8.8 8.0 7. 2 3.2 1.6 Level 7 0.8 4.0 7.2 8.0 8.8 9.6 10.4 9.6 8.8 8.0 4.0 2.4 Level 8 0.8 4.0 8.0 8.8 9.6 10.4 11. 2 10.4 9.6 8.8 4.0 2.4 Level 9 0.8 4.8 8.8 9.6 10.4 11.2 12.0 11. 2 10.4 9.6 4.8 3.2

Level 10 0.8 4.8 9.6 10.4 11.2 12.0 12.8 12.0 11. 2 10.4 4.8 3.2

Segments Warm-Up 1 2 3 4 5 6 7 8 Cool Down

Time 4:00 Level 1 0.5 1.0 1.5 2.0 2.5 3.0 3.5 3.0 2.5 2.0 1.0 0.5 Level 2 0.5 1.0 2.0 2.5 3.0 3.5 4.0 3.5 3.0 2.5 1.0 0.5 Level 3 0.5 1.5 2.5 3.0 3.5 4.0 4.5 4.0 3.5 3.0 1.5 1.0 Level 4 0.5 1.5 3.0 3.5 4.0 4.5 5.0 4.5 4.0 3.5 1.5 1.0 Level 5 0.5 2.0 3.5 4.0 4.5 5.0 5.5 5.0 4.5 4.0 2.0 1.0 Level 6 0.5 2.0 4.0 4.5 5.0 5.5 6.0 5.5 5.0 4.5 2.0 1.0 Level 7 0.5 2.5 4.5 5.0 5.5 6.0 6.5 6.0 5.5 5.0 2.5 1.5 Level 8 0.5 2.5 5.0 5.5 6.0 6.5 7. 0 6.5 6.0 5.5 2.5 1.5 Level 9 0.5 3.0 5.5 6.0 6.5 7. 0 7.5 7. 0 6.5 6.0 3.0 2.0

Level 10 0.5 3.0 6.0 6.5 7.0 7.5 8.0 7.5 7. 0 6.5 3.0 2.0

min 30 sec 30 sec 30 sec 30 sec 30 sec 30 sec 30 sec 30 sec 4:00 min

(British, MPH)

min 30 sec 30 sec 30 sec 30 sec 30 sec 30 sec 30 sec 30 sec 4:00 min

4) 10,000 STEPS: Direct key for step-based program. The treadmill will automatically transfer your workout setting into steps

taken and help you reach your daily step goal. (See note below for more details).

Note: Steps formula: Calculation based of average stride length of 2.6 feet (0.8 meter / 31 inches) Steps = distance/average stride length eg: 1mile = 5280 feet (1609 meters) = 5,280/2.6 =2030 steps

BMI TEST: BMI test direct key to help you gain your BODY MASS INDEX. Input your weight and height after pressing this

key. Your machine will help you calculate your BMI index for furture tracking.

BMI formula: Kilograms and meters (or centimeters) Formula: weight (kg) / [height (m)]2 Pounds and inches Formula: weight (lb) / [height (in)]2 x 703

Category BMI range – kg/m2

Very severely underweight less than 15

Severely underweight from 15.0 to 16.0

Underweight from 16.0 to 18.5

Normal (healthy weight) from 18.5 to 25

Overweight from 25 to 30

Obese Class I (Moderately obese) from 30 to 35

Obese Class II (Severely obese) from 35 to 40

Note: BMI classification may vary in different area, above shows the general information from WHO. For more information feel free to refer to “BMI Classification” from World Health Organization.

ENGLISH

1716

ENERGY SAVER (STANDBY MODE)

T82 EXPLODED VIEW

ENGLISH

This machine has an energy saver mode. The display will automatically enter standby mode (energy saver mode) after 15 minutes of inactivity and could be waken up with a touch of a button. Entering Energy Saver mode almost all power for the machine will be off except for some circuits that are needed to detect a key press, indicating the console should “wake up”. This feature can be turned off by entering the engineering menu.

To enter the engineering menu, press and hold the incline Use incline

and speed to navigate through the menu to ENG3. Press ENTER to select. Use incline and speed to

and speed buttons for 3-5 seconds. (* refer to Note below)

select ENRGY SAVER ON or OFF. Press and hold STOP for 3-5 seconds to exit ENG3. Press and hold STOP again for 3-5 seconds to exit the engineering menu.

106

107

101

115

105

A12

43 44 18

72 32 73 07 74

75 23

109

108

A10

105

A15

A13

A14

A17

75 22

113

114

113

112

113

102

113

21 78

A16

A18

108

109

100

ENGLISH

A11

89 90

1918

T82 PARTS LIST

ENGLISH

NO.

A9 INCLINE MOUNTING SET 1

06 INCLINE MOUNTING 1

64 M8 STAGE SCREW;M8X28 2

114 M8 STAGE SCREW;M8X32.5MM 2

61 Φ8 FLAT WASHER 2

62 M8 LOCKNUT 2

112 NYLON SPACER;Φ24XΦ13XT1.0 2

113 DRY BEARING;Φ18XΦ10XT4.0 8

A7 AIR SHOCK SET 1

27 AIR SHOCK 1

57 M8X45 SCREW 1

58 M8X35 SCREW 1

61 Φ8 FLAT WASHER 4

62 M8 LOCKNUT 2

102 AIR SHOCK STICK 1

A13 MOTOR SET 220V 1

07 MOTOR MOUNTING 1

18 DC MOTOR 220V 1

32 MOTOR CUSHION 1

43 MAGNETIC RING;Φ31XΦ19X13MM 1

44 MAGNETIC RING;Φ25XΦ15X12MM 1

72 M8X12 BOLT 6

73 M8X30 BOLT 2

74 PAD;Φ8 2

A12 MOTOR COVER SET 1

DESCRIPTION

QTY

NO.

12 MOTOR COVER 1

55 ST4.2X16 SCREW 4

84 LOGO 1

A4 LEFT CONSOLE MAST SET 1

03 LEFT CONSOLE MAST 1

56 M8X16 SCREW 1

57 M8X53 SCREW 2

61 Φ8 FLAT WASHER 2

63 ARC WASHER 1

A5 RIGHT CONSOLE MAST SET 1

04 RIGHT CONSOLE MAST 1

56 M8X16 SCREW 1

57 M8X53 SCREW 2

61 Φ8 FLAT WASHER 2

63 ARC WASHER;Φ8 1

A2 CONSOLE COVER SET 1

11 CONSOLE 1

49 AUDIO HEAD FIXED PLATE 2

106 AUDIO CABLE;400MM,3PIN 1

99 MAGNETICINCREASING PLATE;Φ18X4.0 1

46 SAFETY KEY 1

82 ST3X8 SCREW 6

83 TIE 2

101 SAFETY KEY 1

107 ST4.2X13 SCREW 4

DESCRIPTION

QTY

NO.

54 ST4.2X13 SCREW 9

A1 OVERLAY SET WITH EN(DIGITAL) 1

82 ST3X8 SCREW 9

26 CONSOLE CONTROLLER BOARD(220V)(DIGITAL) 1

13 CONSOLE COVER 1

52 CONSOLE STICKER (EN) 1

17 FILM KEY BOARD 1

83 TIE 2

54 ST4.2X13 SCREW 2

A15 FRONT ROLLER SET 1

20 FRONT ROLLER;Φ42 1

30 DRIVE BELT;PJ483/190J/6 SC30 1

61 Φ8 FLAT WASHER 1

78 M8X55 SCREW 1

A16 REAR ROLLER SET 1

21 REAR ROLLER;Φ42 1

61 Φ8 FLAT WASHER;Φ8 2

78 M8X55 SCREW 2

A11 POWER CORD SET 1

41 SOCKET 1

42 RESET/OFF CIRCUIT BREAKER 220V 1

45 POWER CORD 1

88 AC INPUT WIRE(BLACK);100/250MM 1

89 GROUND WIRE(YELLOW&GREEN);350MM 1

90 AC INPUT WIRE(RED);250MM 1

DESCRIPTION

QTY

NO.

91 AC OUTPUT WIRE(RED);100MM 1

93 AC POWER WIRE(RED);550MM 1

95 FILTER WIRE(YELLOW&GREEN);100MM 1

A14 FILTER SET 1

23 INDUCTANCE 1

24 FILTER 1

37 FILTER PLATE 2

75 M4X8 SCREW 8

A17 CONTROLLER SET-ERP DIGITAL) 1

22 CONTROLLER-ERP(DIGITAL) 1

31 CONTROLLER FIXED PLATE;177X174X2.0MM 1

54 ST4.2X13 SCREW 4

75 M4X8 SCREW 2

A3 CONSOLE FRAME SET 1

5 CONSOLE FRAME 1

28 FOAM;315MMX3.0MM,Φ32MMX1.5 2

29 RIGHT HEAT RATE 2

39 ELLIPTICAL PLUG 2

48 ST4.2X30 SCREW 2

53 ST4.2X20 SCREW 4

56 M8*16 BOLT 4

63 ARC WASHER;Φ8 4

96 CONSOLE CONNECT WIRE;550MM,5PIN 1

A10 INCLINE MOTOR SET 220V 1

19 INCLINE MOTOR 220V 1

DESCRIPTION

QTY

ENGLISH

2120

T82 PARTS LIST

ENGLISH

NO.

65 Φ10 FLAT WASHER 2

66 M10 LOCKNUT 1

67 M10X65 BOLT 1

68 M10X50 BOLT 1

69 PAD;Φ25XΦ10.5XT2.0 2

108 M10 LOCKNUT 1

109 Φ10 FLAT WASHER 2

A18 RUNNING DECK SET 1

9 RUNNING DECK;1260X57XT15 1

54 ST4.2X13 SCREW 8

79 M8X20 BOLT 2

80 M8X35 BOLT 4

86 GUIDE 6

A6 BASE FRAME SET 1

01 BASE FRAME 1

33 BUMPER;M10,15MM 4

35 RUBBER PAD;35XΦ20MM 1

40 Φ60 WHEEL 2

47 WIRE PROTECTING PULG;42X26X9MM 1

59 M8X50 SCREW 2

60 Φ13.2XΦ8.2X7 4

61 Φ8 FLAT WASHER 4

62 M8 LOCKNUT 4

65 Φ10 FLAT WASHER 2

115 PAD;Φ8 2

DESCRIPTION

QTY

NO.

92 BASE CONNECT WIRE;1700MM,5PIN 1

105 CAUTION MARK（CN,EN（ 2

A8 LOWER MOTOR COVER SET 1

14 LOWER MOTOR COVER 1

70 ST4.2X13 SCREW 12

A19 MAIN FRAME SET 1

02 MAIN FRAME 1

08 FOOT RAIL 2

10 RUNNING BELT;2820X415XT1.6 1

15 LEFT ROLLER END CAP 1

16 RIGHT ROLLER END CAP 1

34 RUBBER CUSHION;Φ30X20 2

36 PLATFORM CUSHION;45X33XT3.0 4

50 SINGLE-SIDED ADHESIVE;20X1120XT2.0 2

51 SINGLE-SIDED ADHESIVE;20X1120XT1.0 2

54 ST4.2X13 SCREW 5

61 Φ8 FLAT WASHER 6

62 M8 LOCKNUT 6

109 Φ10 FLAT WASHER 2

69 PLASTIC SPACER;Φ25XΦ10.5XT2.0 2

70 ST4.2X13 SCREW 2

75 M4X8 SCREW 2

83 TIE 5

77 STICKER 1

81 STICKER 1

DESCRIPTION

QTY

NO.

85 DECORATION STICKER 2

97 REED SWITCH(DIGITAL);900MM,2PIN 1

100 WHEEL;Φ60XΦ10.2X25 2

108 M10 LOCKNUT 2

55 ST4.2X16 SCREW 4

TOOLING BACK 1

CARTON 1

CARTON INNER 1

DESCRIPTION

QTY

ENGLISH

2322

ENGLISH

Eng: Waste Disposal

VISION Fitness / HORIZON Fitness / TEMPO Fitness / TREO Fitness products are recyclable. At the end if its useful life please dispose of this article correctly and safely (local refuse sites).

Ger: Entsorgungshinweis

Die Produkte VISION Fitness/HORIZON Fitness/TEMPO Fitness/TREO Fitness sind recycelbar. Führen Sie das Gerät am Ende der Nutzungsdauer einer sachgerechten Entsorgung zu (örtliche Sammelstelle).

Dut: Verwijderingsaanwijzing

VISION Fitness / HORIZON Fitness / TEMPO Fitness / TREO Fitness producten zijn recyclebaar. Breng het apparaat aan het einde van de gebruiksduur naar een in recycling gespecialiseerd bedrijf (plaatselijk verzamelpunt).

Fre: Remarque relative à la gestion des déchets

Les produits VISION Fitness / HORIZON Fitness / TEMPO Fitness / TREO Fitness sont recyclables. Lorsque cet appareil arrive en fin de vie, veuillez l’éliminer de manière correcte et en toute sécurité en le déposant dans une déchetterie communale.

Ita: Indicazione sullo smaltimento

I prodotti VISION Fitness / HORIZON Fitness / TEMPO Fitness / TREO Fitness sono riciclabili. Quando l’apparecchio non servirà più, portarlo in un apposito punto di raccolta della propria città (punti di raccolta comunali).

Spe: Gestión de residuos

Los productos de VISION Fitness / HORIZON Fitness / TEMPO Fitness / TREO Fitness son reciclables. Cuando se termine su vida útil, por favor deshágase de este artículo de forma correcta y segura en un punto limpio.

Prb: Descarte

Os produtos VISION Fitness / HORIZON Fitness / TEMPO Fitness / TREO Fitness são recicláveis. No final de sua vida útil, descarte este equipamento corretamente e com segurança (sites de locais de lixo).

ChT: 廢棄物處理

VISION Fitness / HORIZON Fitness / TEMPO Fitness / TREO Fitness 產品為可回收產品。產品的使用年限期滿後，請依照正確且安全的方式處理本廢棄商品 (當地的廢棄場)。

ChS: 废弃物处理

VISION Fitness / HORIZON Fitness / TEMPO Fitness / TREO Fitness 产品是可回收利用的。在其使用期结束后，请正确安全地（在本地垃圾处理场）处理本品。

AUFBAU

ACHTUNG

Es gibt mehrere Bereiche, auf die es bei der Montage besonders zu achten gilt. Die Montageanleitung sollte unbedingt genau befolgt und alle Teile fest angezogen werden. Wenn die Montageanleitung nicht korrekt befolgt wird, können Rahmenteile des Laufbands lose sitzen und störende Geräusche auslösen. Um Schäden am Laufband zu vermeiden, muss die Montageanleitung geprüft und entsprechende Abhilfemaßnahmen ergriffen werden.

Bevor Sie fortfahren, suchen Sie die Seriennummer Ihres Laufbandes auf dem vorderen Stabilisatorrohr und tragen Sie sie in das dafür vorgesehene Feld unten ein. Notieren Sie sich auch den Modellnamen, der sich neben der Seriennummer befindet.

GEBEN SIE SERIENNUMMER UND MODELLBEZEICHNUNG IN DIE UNTENSTEHENDEN FELDER EIN:

SERIENNUMMER:

MODELLNAME: HORIZON LAUFBAND

DEUTSCH

2524

DEUTSCH

GRIFF-PULS-HANDLÄUFE

GRIFFSTANGEN

KONSOLENMAST

MOTORABDECKUNG

TRANSPORTRAD

LAUFBAND/LAUFDECK

SEITENSCHIENE

FLASCHENHALTER

KONSOLE

STECKPLATZ SICHERHEITS-

SCHLÜSSEL

EIN-/AUS-SCHALTER

SCHUTZSCHALTER

NETZKABEL

AUFKLEBER SERIENNR.

HINTERE WALZENSPANNUNG/EINSTELLSCHRAU-

ENTHALTENE WERKZEUGE:

F Inbusschlüssel/Schraubendreher

5 mm

F Inbusschlüssel 6 mm

ENTHALTENE TEILE:

F 1 Konsoleneinheit F 2 Konsolenmasten F 1 Bausatz F 1 Sicherheitsschlüssel F 1 Netzkabel F 1 Silikon

BENÖTIGEN SIE HILFE?

Wenn Sie Fragen haben

oder Teile fehlen, wenden

Sie sich bitte an Ihren

Händler vor Ort.

VOR MONTAGE

AUSPACKEN

Platzieren Sie den Laufbandkarton auf einer ebenen, geraden Fläche. Es wird empfohlen, eine schützende Unterlage auf den Boden zu legen. Seien Sie bei Handhabung und Transport des Geräts stets VORSICHTIG. Öffnen Sie den Karton nicht, wenn er auf der Seite liegt. Heben oder transportieren Sie das Gerät nach dem Entfernen der Transportbänder erst, wenn es vollständig aufgebaut ist. Nehmen Sie das Gerät aus der Verpackung und montieren Sie es dort, wo es verwendet werden soll. Greifen Sie nicht nach Teilen des geneigten Rahmens und versuchen Sie nicht, das Laufband anzuheben oder zu bewegen.

ACHTUNG

VERSUCHEN SIE NICHT, DAS LAUFBAND ANZUHEBEN! Bewegen Sie das Laufband nicht und heben Sie es nicht aus der Verpackung, solange die Montageanleitung dies nicht ausdrücklich vorgibt. Sie können die Plastikfolie von den Konsolenmasten entfernen.

ACHTUNG

DIE NICHTBEACHTUNG DIESER ANLEITUNG KANN ZU VERLETZUNGEN FÜHREN!

HINWEIS: Stellen Sie bei jedem Montageschritt sicher, dass ALLE Muttern und Schrauben am richtigen Platz und ein Stück weit eingedreht sind, bevor Sie die Schrauben EINZELN festziehen.

HINWEIS: Eine kleine Menge Schmierfett kann bei der Montage hilfreich sein. Jedes Fett eignet sich, z. B. Lithium-Fahrradfett.

DEUTSCH

2726

AUFBAU SCHRITT 1

AUFBAU SCHRITT 2

DEUTSCH

TEILE FÜR SCHRITT 1

LANGE SCHR AUBEN (A) M8 X 50L MENGE: 4

FEDERSCHEIBEN (C) Ø 8 MENGE: 2

LEFT CONSOLE MAST

MAIN FRAME B RACKET

RIGHT CON SOLE MAST

KURZE SCHRAUBEN (B) M8 X 16L MENGE: 2

UNTERLEGSCHEIBEN (D) Ø 8 MENGE: 4

A A. Öffnen Sie die Verpackung und entfernen Sie

alle Teile unter der Lauffläche, indem Sie die Lauffläche anheben.

B Öffnen Sie die EISENWAREN-TEILE für Schritt 1.

C Richten Sie den LINKEN KONSOLENMAST an

der Grundrahmenhalterung aus und befestigen Sie ihn mit 2 LANGEN SCHRAUBEN (A), 1 KURZEN SCHRAUBE (B), 2 UNTERLEGSCHEIBEN (D) und 1 FEDERSCHEIBE (C).

D Schließen Sie die KONSOLENKABEL am

RECHTEN KONSOLENMAST an und stecken Sie die Drähte vorsichtig in den RECHTEN KONSOLENMAST, um Beschädigungen zu vermeiden.

E Wiederholen Sie Schritt C am RECHTEN

KONSOLENMAST.

HINWEIS: Achten Sie beim Aufbau des Konsolenmasts darauf, keine Drähte einzuklemmen oder zu brechen. Bei den Montageschritten 1 oder 2 benötigen Sie möglicherweise Hilfe; die Schrauben sollten NICHT vollständig angezogen werden, bevor Schritt 2 abgeschlossen ist.

TEILE FÜR SCHRITT 2

KURZE SCHRAUBEN (B) M8 X 16L MENGE: 4

c b

LEFT CONS OLE MAST

FEDERSCHEIBEN (C) Ø 8 MENGE: 4

RIG HT CONSOLE MAST

A Öffnen Sie die EISENWAREN-TEILE für Schritt 2.

B Halten Sie die KONSOLE vorsichtig über den

KONSOLENMAST.

C Schließen Sie die KONSOLENKABEL rechts

an und stecken Sie die Drähte vorsichtig in den RECHTEN KONSOLENMAST, um Schäden zu vermeiden.

Befestigen Sie die KONSOLE am

KONSOLENMAST mit 4 KURZEN SCHRAUBEN (B)

und 4 UNTERLEGSCHEIBEN (C).

HINWEIS: Befestigung der Konsole von unten. Achten Sie darauf, keine Drähte einzuklemmen, und ziehen Sie alle Schrauben vollständig an, bevor Sie das Laufband in Betrieb nehmen.

DEUTSCH

2928

+ 32 hidden pages

Horizon Fitness T82 operation manual

Specifications and Main Features

Frequently Asked Questions

User Manual