Horizon Fitness T74, T73 User Manual

HORIZON SERIES

PRESS TO SET INCLINE

PRESS TO SET SPEED

ENTER

INCLI N E

SPEE

10 %

9 %

8 %

7 %

6 %

5 %

4 %

3 %

2 %

1 %

MPH

MANUAL

INTE

RVALS

HILLS

WEI

GHT

LOSS

ZONE

THR ZONE 2

PRESS ENTER DURING WORKOUT TO CHANGE DISPLAY

ING

HEART

RATE

SPE

INCLINE

STAR T

PAUS E

ST O P

HOLD

TO R E S E T

STEP

1 : SELECT PR

OGRAM

STEP 3 : PRE

SS START

TO BEGIN

STEP 2 : PRO

GRAM SETUP

FOR MODELS :

T73

T74

TREADMILL U S E R ’ S GUIDE

IN TRODUCTION

CONGRATULATIONS and THANK YOU for your purchase of this Horizon Series Treadmill!

Whether your goal is to win races or simply enjoy a fuller, healthier lifestyle, a Horizon Series treadmill can help you attain it – adding club-quality performance to your at-home workouts, with the ergonomics and innovative features you need to get stronger and healthier, faster. Because we're committed to designing fitness equipment from the inside out, we use only the highest quality components. It's a commitment we back with one of the strongest frame-to-motor warranty packages in the industry.

You want exercise equipment that offers the most comfort, the best reliability and the highest quality in its class.

The Horizon Series delivers.

INTRODUCTION

IMPORTANT

PRECAUTIONS

ASSEMBLY

TA B L E OF CO N T E NT S

Important Precautions

Assembly

Before You Begin

Treadmill Operation

Conditioning Guidelines

Troubleshooting & Maintenance

BEFORE

YOU BEGIN

TREADMILL

OPERATION

GUIDELINES

CONDITIONING

Limited Warranty

CONTACT INFORMATION

Back Panel

& MAINTENANCE

TROUBLESHOOTING

LIMITED

WARRANTY

INTRODUCTION

WARNING

3-Pole Grounded Outlet

GROUNDED TREADMILL POWER CORD

IM PORTA NT PR EC AU TIONS

PRECAUTIONS

IMPORTANT

ASSEMBLY

YOU BEGIN

BEFORE

SAVE THESE INSTRUCTIONS

Read all instructions before using this treadmill. When using an electrical product, basic precautions should always be followed, including the following: Read all instructions before using this treadmill. It is the responsibility of the owner to ensure that all users of this treadmill are adequately informed of all warnings and precautions. If you have any questions after reading this manual, contact Customer Tech Support at the number listed on the back panel of this manual.

Connect this exercise product to a properly grounded outlet only. See grounding instructions.

GROUNDING INSTRUCTIONS

This product must be grounded. If a treadmill should malfunction or breakdown, grounding provides a path of least resistance for electrical current to reduce the risk of electrical shock. This product is equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with local codes and ordinances.

OPERATION

TREADMILL

CONDITIONING

GUIDELINES

This product is for use on a nominal 110-volt circuit and has a grounding plug that looks like the illustration below. This product must be used on a dedicated circuit. To determine if you are on a dedicated circuit, shut off the power to that circuit and observe if any other

TROUBLESHOOTING

& MAINTENANCE

devices lose power. If so, move devices to a different circuit. Note: There are usually multiple outlets on one circuit. It is recommended that the treadmill be used with a 20 amp circuit for optimal performance.

Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the product is properly grounded. Do not modify the plug provided with the product. If it will not fit the outlet, have a proper outlet installed by a qualified electrician.

WARRANTY

LIMITED

To reduce the risk of burns, fire, electrical shock or injury to persons:

WARNING

• Never use the treadmill before securing the safety tether clip to your clothing.

• If you experience any kind of pain, including but not limited to chest pains, nausea, dizziness, or shortness of breath, stop exercising immediately and consult your physician before continuing.

• Do not wear clothes that might catch on any part of the treadmill.

• Always wear athletic shoes while using this equipment.

• Do not jump on the treadmill.

• Keep power cord away from heated surfaces.

• Do not insert or drop any object into any opening.

• Unplug treadmill before moving or cleaning it. To clean, wipe surfaces down with soap and slightly damp cloth only; never use solvents. (See MAINTENANCE)

• At no time should more than one person be on treadmill while in operation.

• The treadmill’s should not be used by persons weighing more than 325 pounds (T73) or 350 pounds (T74). Failure to comply will void the warranty.

• The treadmills are intended for in-home use only. Do not use this treadmill in any commercial, rental, school or institutional setting. Failure to comply will void the warranty.

• Do not use treadmill in any location that is not temperature controlled, such as but not limited to garages, porches, pool rooms, bathrooms, car ports or outdoors. Failure to comply may void the warranty.

• Use the treadmill only as described in this manual.

INTRODUCTION

IMPORTANT

PRECAUTIONS

ASSEMBLY

BEFORE

YOU BEGIN

At NO time should pets or children under the age of 12 be closer to the treadmill than 10 feet. At NO time should children under the age of 12 use the treadmill. Children over the age of 12 should not use the treadmill without adult supervision.

OTHER SAFETY TIPS FOR YOUR TREADMILL

OPERATION

To reduce the risk of damaging important components on your treadmill, it is strongly recommended that your treadmill is plugged into a dedicated 20 amp circuit, without the use of an additional extension cord and/or power strip. Failure to complay may void the warranty.

IMPORTANT: The treadmill is not compatible with GFCI-equipped outlets.

It is essential that your treadmill is used only indoors, in a climate controlled room. If your treadmill has been exposed to colder temperatures or high moisture climates, it is strongly recommended that the treadmill is warmed up to room temperature before first time use. Failure to do so may cause premature electronic failure.

TREADMILL

OPERATION

GUIDELINES

CONDITIONING

& MAINTENANCE

TROUBLESHOOTING

LIMITED

WARRANTY

INTRODUCTION

WARNING

PRECAUTIONS

IMPORTANT

ASSEMBLY

AS SEMBLY

IMPORTANT: READ THESE SAFETY INSTRUCTIONS BEFORE USE!

During the assembly process of the treadmill there are several areas that special attention must be paid. It is very important to follow the assembly instructions correctly and to make sure all parts are firmly tightened. If the assembly instructions are not followed correctly, the treadmill could have frame parts that are not tightened and will seem loose and may cause irritating noises. There should be no side-to-side play in the console masts or any forward and back play in the console assembly or handlebars. If there is any play in these areas, the treadmill has not been properly assembled. To prevent damage to the treadmill, the assembly instructions must be reviewed and corrective actions should be taken.

YOU BEGIN

BEFORE

OPERATION

TREADMILL

CONDITIONING

GUIDELINES

TROUBLESHOOTING

& MAINTENANCE

UNPACKING

Place the treadmill carton on a level flat surface. It is recommended that you place a protective covering on your floor. Take CAUTION when handling and transporting this unit. Never open box when it is on its side. Once the banding straps have been removed, do not lift or transport this unit unless it is fully assembled and in the upright folded position, with the lock latch secure. Unpack the unit where it will be used. The enclosed treadmill is equipped with high-pressure shocks and may spring open if mishandled. Never grab hold of any portion of the incline frame and attempt to lift or move the treadmill. FAILURE TO FOLLOW THESE INSTRUCTIONS COULD RESULT IN INJURY!

Before proceeding, find your treadmill’s serial number and model name located under the deck on the frame crossbar and enter it in the space provided below.

ENTER YOUR SERIAL NUMBER AND MODEL NAME IN THE BOxES BELOW:

WARRANTY

LIMITED

SERIAL NUMBER :

MODEL NAME:

* Refer to the SERIAL NUMBER and MODEL NAME when calling for service. * Also enter this serial number on your Warranty Card.

INTRODUCTION

TOOLS INCLUDED

PARTS INCLUDED

1 Safety Key 1 Console Assembly (located under treadmill deck) 1 Power Cord 3 Hardware Bags (T73) 4 Hardware Bags (T74)

2 Handgrips 2 Handlebars 2 Support Bars 1 Magazine Rack (T74)

READING RACK

WATER BOTTLE HOLDER

GRIP PULSE HANDRAILS

MAGAZINE RACK (T74)

ON/OFF SWITCH

CIRCUIT BREAKER

FOOT LOCK LATCH TRANSPORT WHEEL

C3™ CUSHIONING SYSTEM

POWER CORD

CONSOLE (T74 SHOWN)

STORAGE AREA

FAN

SAFETY KEY PLACEMENT

MOTOR COVER

RUNNING BELT / RUNNING DECK

ROLLER END CAP

CONSOLE MAST

REAR ROLLER

ADJUSTMENT BOLTS

If you have questions or if there are any missing parts, contact Customer Tech Support.

Contact information is located on the back panel of this manual.

For a complete exploded diagram, visit us at www.horizonﬁtness.com

Phillips Screwdriver

L-shape Phillips & Allen Wrench

6 mm T-wrench

HANDLEBARS

SIDE RAIL

IMPORTANT

PRECAUTIONS

ASSEMBLY

BEFORE

YOU BEGIN

TREADMILL

OPERATION

GUIDELINES

CONDITIONING

& MAINTENANCE

TROUBLESHOOTING

LIMITED

WARRANTY

INTRODUCTION

BOLT (A) 65 mm Qty: 4

FLAT WASHER (B) 16 mm Qty: 4

SPRING WASHER (C) 16 mm Qty: 4

CONSOLE MAST

FLAT WASHER

BOLT (A)

SPRING WASHER

MAIN FRAME

CONSOLE CABLE

LEAD WIRE

PRECAUTIONS

IMPORTANT

PRE-AS S E M B LY

Disassemble box and remove the cardboard packaging that is not beneath the treadmill. Do not attempt to lift the treadmill at this time. Remove plastic wrap from console masts.

NOTE: During each assembly step, ensure that ALL nuts and bolts are in place and partially threaded in before

completely tightening any ONE bolt. NOTE: A light application of grease may aid in the installation of hardware. Any grease, such as lithium bike grease is recommended.

ASSEMBLY

YOU BEGIN

BEFORE

OPERATION

TREADMILL

ASSEMBLY S T E P 1

HARDWARE BAG 1 CONTENTS :

Open HARDWARE BAG 1.

Pull LEAD WIRE through RIGHT CONSOLE MAST to drag upward.

CONDITIONING

GUIDELINES

TROUBLESHOOTING

& MAINTENANCE

WARRANTY

LIMITED

Place LEFT CONSOLE MAST into upright position. Be sure to hold the console mast firmly, as it will not stay in the upright position on its own.

Use BOLTS (A), 2 SPRING WASHERS (B), and 2 FLAT WASHERS (C) to attach console mast to the MAIN FRAME.

Repeat on the right side.

ASSEMBLY S T E P 2

WASHERS (E)

BOLT (D)

ASSEMBLED IN STEP 2-C

BOLT (D) 20 mm Qty: 4

top view

FLAT WASHER (E) 16 mm Diameter Qty: 4

INTRODUCTION

HARDWARE BAG 2 CONTENTS :

Open HARDWARE BAG 2.

Lift the RUNNING DECK until lock

latch on side of treadmill is fully engaged (See step 1).

Remove CONSOLE from box

and place out of the way (See step 2).

Lower the treadmill RUNNING

DECK from the folded position

by stepping on LOCK LATCH on lower left side (See step 3).

With running deck in lowered position, place CONSOLE on upright masts.

IMPORTANT

PRECAUTIONS

ASSEMBLY

BEFORE

YOU BEGIN

* Be sure to tighten bolts after all are lined up.

* NOTE: Be careful not to pinch any

wires while assembling the masts.

Place FLAT WASHER (E) and BOLT (D)

into LEFT upright

MAST and CONSOLE and

lightly tighten.

Gently lift RIGHT side of the console to connect the CONSOLE CABLE. Carefully tuck wires in mast to avoid damage. Note: Do not pinch console cable. Be sure the console cable prongs are aligned and the ends are tightly seated into each other.

Repeat steps F-G above to assemble the right side upright mast and console.

Tighten all bolts completely.

TREADMILL

OPERATION

GUIDELINES

CONDITIONING

& MAINTENANCE

TROUBLESHOOTING

LIMITED

WARRANTY

INTRODUCTION

BOLT (F) 115 mm Qty: 4

top view

ARC WASHER (G) Qty: 4

SPRING WASHER (H) Qty: 4

CONSOLE MAST

ARC WASHER (G)

SPRING WASHER (H)

BOLT (F)

STEP 1 : S ELEC T P RO

GRAM

STEP 2 : P ROGR AM SET UP

STEP 3 : S TART

MANUAL

INTERVALS

ROLLING

WEIGHT LOSS

HILLS THR ZONE

CUSTOM 1

CUSTOM 2

ENTE R

PRESS S TART TO BEGI N

PRESS TO SET INCLINE

PRESS TO SET

SPEED

SPEE D

INCL I NE

PR EM I UM S ER IE S

INC L I N E

SPE E D

12 %

11 %

10 %

9 %

8 %

7 %

6 %

5 %

4 %

3 %

2 %

1 %

MPH

S T O P

HO L D TO

R E S E T

ST A R T

PA U S E

CONSOLE MAST

ARC WASHER (G)

SPRING WASHER (H)

BOLT (F)

PRECAUTIONS

IMPORTANT

ASSEMBLY S T E P 3

HARDWARE BAG 3 CONTENTS :

ASSEMBLY

YOU BEGIN

BEFORE

OPERATION

TREADMILL

CONDITIONING

GUIDELINES

T73 ASSEMBLY

T74 ASSEMBLY

A Open HARDWARE BAG 3.

B Attach left HANDLEBAR to

CONSOLE MAST using 2 BOLTS (F), 2 SPRING WASHERS (G), and 2 ARC WASHERS (H).

C Repeat on other side.

TROUBLESHOOTING

& MAINTENANCE

WARRANTY

LIMITED

BOLT (I)

MAGAZINE RACK

FLAT WASHER (J)

ASSEMBLY S T E P 4 (T 74 ON LY )

BOLT (I) 20 mm Qty: 4

top view

FLAT WASHER (J) Qty: 4

HARDWARE BAG 4 CONTENTS FOR T74:

A Open HARDWARE BAG 4.

B Align MAGAZINE RACK with holes

in CONSOLE MAST.

C Insert 1 BOLT (I) and 1 FLAT

WASHER (J) into each of the 4 holes of the MAGAZINE RACK.

D Tighten all 4 BOLTS (H).

INTRODUCTION

IMPORTANT

PRECAUTIONS

ASSEMBLY

BEFORE

YOU BEGIN

TREADMILL

OPERATION

GUIDELINES

CONDITIONING

& MAINTENANCE

TROUBLESHOOTING

LIMITED

WARRANTY

+ 25 hidden pages